數據字段

!Time Data Data Data Data Data Data Data Data

!Time Data Data Data Data Data Data Data Data

!Time Data Data Data Data Data Data Data Data

!Time Data Data Data Data Data Data Data Data

……………………….

以下是數據文件的示例。

Fig. C 2.11 Sample Configuration of the data file 圖C 2.11數據文件配置示例

C3消息

以下是錯誤和其他消息。

消息顯示在窗口底部。一些重要的消息顯示在彈出對話框中。

表C3.1.1 AIDA生成器消息

消息條目 消息格式 消息說明

1 "AIDA Data Archiving Tool"(“AIDA數據歸檔工具”)

2 "Error occurred during Disconnection from the OPC Server"(“因OPC服務器斷開連接而發生錯誤”)

3 "Could not Connect to the OPC Server ."(“無法連接到OPC服務器”) 從下拉菜單中指定OPC服務器。

4 "Set up Computer and ProgID correctly from an Option Dialog."(“從選項對話框中正確設置計算機和ProgID”。)

5 "The Definition File does not Exist."( “定義文件不存在”。) 從下拉菜單保存定義文件。

6 "The Data File does not Exist."(“數據文件不存在”。) 從下拉菜單中保存數據文件。

7 "Could not read the Definition File."(“無法讀取定義文件。”)

8 "Please input the ItemID."(“請輸入ItemID。”)

9 "This Present Settings has not been saved in the Definition File yet."(“當前設置尚未保存在定義文件中。”)

10 "Would you like to Reset all the settings ?"(“您要重置所有設置嗎？”)

11 "Would you like to open a New File?"(“您要打開新文件嗎？”)

12 "Would you like to save the Present Settings in the Definition File?"(“是否要在定義文件中保存當前設置？”)

13 "has been used." (“已使用。”)

14 "Would you like to Overwrite this file?"(“要覆蓋此文件嗎？”)

15 "You can only enter Numerical Value."(“您只能輸入數值。”)

16 "The value entered should not Less than 0." (““輸入的值不應小于0。”) 時間和數字數據應為正整數。

17 "The value entered should not Less than 1." (“輸入的值不應小于1.”) 時間和數字數據應為正整數。

18 "There is no ItemID." (“沒有ItemID。”) 檢查位號的ItemID。

19 "Are you sure you want to Quit?"(“你確定要退出嗎？”)

20 "Would you like to clear all the Settings and Open a Data file?"(“要清除所有設置并打開數據文件嗎？”)

21 "Could not display Data." (“無法顯示數據”。)

22 "Please display the Data File from the "(“請從…顯示數據文件。”)

23 "The FileName is not correct"(“FileName不正確。”)

24 "OPC Server has not been set." & "Please set the OPC Server from the [Edit] menu."(“OPC服務器尚未設置。”＆“請從[編輯]菜單中設置OPC服務器。”)

25 "Error occurred during Initialization of the Screen."(“初始化屏幕期間發生錯誤。”)

26 "Error occurred during Initialization of the Screen."(“初始化屏幕期間發生錯誤。”)

27 "Error occurred during registration of the ItemID."(“注冊ItemID時出錯。”)

28 "Error occurred during Collection of the HDA Data."(“收集HDA數據期間發生錯誤。”)

289 "Error occurred during Opening of the Data File."(“打開數據文件時出錯。”)

30 "Error occurred during Opening of the Definition File."(“打開定義文件時出錯。”)

31 "Error occurred during saving of the Def File."(“保存Def文件時出錯。”)

32 "Error occurred during Displaying of the Time Series Dialog."(“顯示時間序列對話框時出錯。”)

33 "Error Occurred during Data Collection."(“數據采集期間發生錯誤。”)

34 "Error Occurred during Terminate Process."(“終止過程中出錯。”)

35 "Error Occurred during Browsing Process."(“瀏覽過程中出錯。”)

36 Public Const pubMESS_DATAERR As String = "The entered value is Invalid."(Public Const pubMESS_DATAERR As String =“輸入的值無效。)

37 "The Format of the Date is not Correct. [MM/DD/YYYY hh:mm:ss]"(“日期格式不正確。[MM / DD / YYYY hh：mm：ss]”)

38 "There are too many Samples."(“樣本太多。”)

39 "Would you like to stop the Data Collection?"(“您要停止數據收集嗎？”)

40 "It is not connected to the OPC Server."(““它未連接到OPC服務器。”)

41 "This Data File is Under Used Now."(“此數據文件現在未被使用。”)

原文：

Data field Section

!Time Data Data Data Data Data Data Data Data

!Time Data Data Data Data Data Data Data Data

!Time Data Data Data Data Data Data Data Data

!Time Data Data Data Data Data Data Data Data

……………………….

Following is an example of Data file.

C3. Messages

The following are the error and other messages.

Messages and displayed on the bottom of the window. Some important message are displayed on the pop up dialog.

Table C3.1.1 AIDA Generator messages

Msg. No. Message Format Description of the Message

1 "AIDA Data Archiving Tool"

2 "Error occurred during Disconnection from the OPC Server"

3 "Could not Connect to the OPC Server ." Specify OPC server from the pull down menu.

4 "Set up Computer and ProgID correctly from an Option Dialog."

5 "The Definition File does not Exist." Save the definition file from the pull down menu.

6 "The Data File does not Exist." Save the data file from the pull down menu.

7 "Could not read the Definition File."

8 "Please input the ItemID."

9 "This Present Settings has not been saved in the Definition File yet."

10 "Would you like to Reset all the settings ?"

11 "Would you like to open a New File?"

12 "Would you like to save the Present Settings in the Definition File?"

13 "has been used."

14 "Would you like to Overwrite this file?"

15 "You can only enter Numerical Value."

16 "The value entered should not Less than 0." Time and number data should be positive integer.

17 "The value entered should not Less than 1." Time and number data should be positive integer.

18 "There is no ItemID." Check the ItemID of the tag.

19 "Are you sure you want to Quit?"

20 "Would you like to clear all the Settings and Open a Data file?"

21 "Could not display Data."

22 "Please display the Data File from the "

23 "The FileName is not correct"

24 "OPC Server has not been set." & "Please set the OPC Server from the [Edit] menu."

25 "Error occurred during Initialization of the Screen."

26 "Error occurred during Initialization of the Screen."

27 "Error occurred during registration of the ItemID."

28 "Error occurred during Collection of the HDA Data."

289 "Error occurred during Opening of the Data File."

30 "Error occurred during Opening of the Definition File."

31 "Error occurred during saving of the Def File."

32 "Error occurred during Displaying of the Time Series Dialog."

33 "Error Occurred during Data Collection."

34 "Error Occurred during Terminate Process."

35 "Error Occurred during Browsing Process."

36 Public Const pubMESS_DATAERR As String = "The entered value is Invalid."

37 "The Format of the Date is not Correct. [MM/DD/YYYY hh:mm:ss]"

38 "There are too many Samples."

39 "Would you like to stop the Data Collection?"

40 "It is not connected to the OPC Server."

41 "This Data File is Under Used Now."

2017.2.26

總結

以上是生活随笔為你收集整理的mess系统可以读取opc服务器,C3. Messages的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。