android初學者

When you run an app on your Android device, you can minimize it and return to the home screen easily by touching or pressing the Home button. However, what if you want to quickly get to an open app from within a another open app?

在Android設備上運行應用程序時，可以通過觸摸或按“主頁”按鈕將其最小化并輕松返回到主屏幕。 但是，如果您想從另一個打開的應用程序中快速進入一個打開的應用程序，該怎么辦？

Note:?this article is obviously meant for beginners.

注意：本文顯然是針對初學者的。

To switch to another app while in one app, touch the Recent Apps icon at the bottom of the screen.

要在一個應用程序中切換到另一個應用程序，請觸摸屏幕底部的“最近使用的應用程序”圖標。

NOTE: We used a Nexus 7 as an example for this article. If you are using a Samsung Galaxy device, press and hold the Home button.

注意：我們以Nexus 7為例。 如果您使用的是Samsung Galaxy設備，請按住“主頁”按鈕。

A list of open apps displays with thumbnails. You can swipe up and down (in Portrait mode) or side to side (in Landscape mode) to move among the open apps. Touch an app to switch to it.

顯示打開的應用程序列表和縮略圖。 您可以上下滑動(在縱向模式下)或左右滑動(在橫向模式下)在打開的應用程序之間移動。 觸摸某個應用即可切換到該應用。

If you don’t like the default methods of switching among apps on Android devices, there are apps available that provide different ways of easily switching among open apps.

如果您不喜歡在Android設備上切換應用程序的默認方法，則可以使用提供不同方式輕松切換打開的應用程序的應用程序。

As an example, we will show you an app called Switchr, which is available for free in the Google Play Store. Find Switchr in the Play Store and touch Install to install the app.

例如，我們將向您展示一個名為Switchr的應用程序，該應用程序可在Google Play商店免費獲得。 在Play商店中找到Switchr，然后觸摸安裝以安裝該應用。

An icon is added to your home screen on a Nexus. Touch the icon to open the app.

在Nexus上的主屏幕上會添加一個圖標。 觸摸圖標以打開應用。

NOTE: If you’re using a Samsung Galaxy device, touch the Apps icon to access the Apps screens. Find the Switchr app and touch it to open it.

注意：如果您使用的是Samsung Galaxy設備，請觸摸“應用程序”圖標以訪問“應用程序”屏幕。 找到切換器應用，然后觸摸以將其打開。

When the title screen displays, touch Next to go through the introductory screens. If you want to skip the introduction, touch Skip.

顯示標題屏幕時，觸摸下一步以瀏覽介紹性屏幕。 如果您想跳過簡介，請觸摸跳過。

A screen displays prompting you to try swiping in from the edge to activate Switchr.

屏幕顯示提示您嘗試從邊緣輕掃以激活Switchr。

NOTE: It may take a few tries to get the swiping action to work.

注意：可能需要一些嘗試才能使滑動操作生效。

Once you’ve activated Switchr, the app asks if you’d like to configure Switchr. Touch Configure in the lower-right corner of the screen.

激活Switchr后，應用會詢問您是否要配置Switchr。 觸摸屏幕右下角的配置。

You can choose which edges you use to drag out the list of open apps from which you can choose. To do this, on the Switchr General settings screen, touch Setup edge triggers under Edge Swipe.

您可以選擇用來拖出打開的應用程序列表的邊緣。 為此，請在“ Switchr常規設置”屏幕上的“邊緣滑動”下，觸摸“設置邊緣觸發器”。

Drag your finger down one side or both sides to draw the triggers to use for accessing open apps. We recommend you use both sides because some apps may have drag in menus on at least one side

在一側或兩側向下拖動手指以繪制觸發器，以用于訪問打開的應用程序。 我們建議您同時使用兩側，因為某些應用程序可能至少在一側拖動了菜單

NOTE: The first time you access the Setup edge triggers settings screen, the How-to screen displays showing you how to set them up.

注意：首次訪問“設置邊緣觸發設置”屏幕時，將顯示“操作方法”屏幕，向您顯示如何進行設置。

You can’t put an edge trigger at the top of the screen because of the action bar and you can only put an edge trigger on the bottom of the screen if you purchase the Pro version of Switchr ($1.99).

由于操作欄的原因，您不能在屏幕頂部放置一個邊緣觸發器，并且如果您購買了專業版的Switchr($ 1.99)，則只能在屏幕底部放置一個邊緣觸發器。

Once you are finished setting up the edge triggers, touch Okay in the lower-right corner of the screen to accept your changes and go back to the main Settings screen.

完成邊緣觸發的設置后，觸摸屏幕右下角的“確定”以接受您的更改并返回到“設置”主屏幕。

NOTE: You may see a Tips dialog box display with tips on setting up the edge triggers. First, set up your edge triggers and then touch the check mark to accept your changes, close the dialog box, and return to the setup screen.

注意：您可能會看到“提示”對話框，其中包含設置邊沿觸發器的提示。 首先，設置邊緣觸發器，然后觸摸復選標記以接受您的更改，關閉對話框，然后返回到設置屏幕。

You can also choose to have your device vibrate when you access a trigger to switch apps. To do this, select the Haptic feedback check box. Additional settings are available by touching More Settings.

您還可以選擇在訪問觸發器以切換應用程序時使設備振動。 為此，請選擇“觸覺反饋”復選框。 觸摸更多設置可以使用其他設置。

If you chose to turn on Haptic feedback, you can set the Vibration duration, in milliseconds, by dragging the blue dot to the right (increasing) or left (decreasing). Select High resolution icons if you want to display higher quality icons when switching apps. Note that this can slow down the response time.

如果選擇打開觸覺反饋，則可以通過向右(增大)或向左(減小)拖動藍點來設置振動持續時間(以毫秒為單位)。 如果要在切換應用程序時顯示更高質量的圖標，請選擇“高分辨率圖標”。 請注意，這會減慢響應時間。

When you’re finished choosing your settings, touch the Home button to return to the Home screen.

選擇完設置后，請觸摸“主頁”按鈕以返回到主屏幕。

To switch to another app when you’re in one app, swipe out from a side of the screen (where you drew an edge trigger), keeping your finger on the screen. Do not lift your finger, yet. Move your finger over the app icons to choose an app to activate and then lift your finger from the screen. The chosen app opens.

要在使用一個應用程序時切換到另一個應用程序，請從屏幕的一側(畫出一個邊沿觸發器)向外滑動，同時將手指保持在屏幕上。 請勿抬起手指。 將手指移到應用程序圖標上，選擇要激活的應用程序，然后從屏幕上抬起手指。 所選的應用程序打開。

You can clear recent apps from the list by swiping them sideways one at a time.

您可以一次向側面滑動一下，以清除列表中的最新應用。

翻譯自: https://www.howtogeek.com/195624/how-to-switch-among-open-apps-on-your-android-device/

android初學者

總結

以上是生活随笔為你收集整理的android初学者_初学者：如何在Android设备上的打开的应用程序之间切换的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。