最快的安裝是用下面的scalapack_installer，它將自動聯網安裝SCALAPACK以及所需要的BLAS, BLACS,LAPACK。

?

下面是簡短說明:

?

INTRODUCTION

The ScaLAPACK installer is a set of python scripts developed to ease
the installation of the ScaLAPACK library. It can automatically
download, configure and compile the ScaLAPACK including all its
dependencies that are BLAS, LAPACK and BLACS libraries. All it needs
is the mpi C and FORTRAN compilers mpicc and mpif77 (note that the
names of these compilers may be different than mpicc and mpif77 on
some systems). Please note that this is an alpha version and, even if
it has been tested on a wide set of systems, may not work. In case you
encounter a problem, your feedback would be greatly appreaciated and
would be very useful to improve the quality of this installer.
Please submit your complaints and suggestions to scalapack@cs.utk.edu
or on the lapack/scalapack forum: http://icl.cs.utk.edu/lapack-forum/

Note: If you want use a proxy for downloading, the http_proxy environment variable has to be set.

If the required packages cannot be automatically downloaded (for
example, because no network connection is available on the system),
you can take them any way you like from the following URLs and place
them in the build directory (if the directory does not exist, create
it):

BLAS : http://netlib.org/blas/blas.tgz

LAPACK : http://netlib.org/lapack/lapack.tgz

BLACS : http://netlib.org/blacs/mpiblacs.tgz

ScaLAPACK : http://netlib.org/scalapack/scalapack-1.8.0.tgz

Please note that, in the case where the installer is asked to
automatically download and install the BLAS library, the reference
BLAS is installed and, thus, very low performance is to be expected.
It is strongly recommended that you use an highly optimized BLAS
library (like ATLAS, MKL, GotoBLAS, ESSL etc.) and provide a path to
its location through the --blaslib flag.


壓縮包內帶說明。

?

下載：

scalapack_installer.tgz
http://www.netlib.org/scalapack/scalapack_installer.tgz

?

需要注意的是，這個腳本安裝工具會自動設置系統的BLAS鏈接，如果你需要一個更好的BLAS庫，建議你安裝優化的BLAS如ATLAS, MKL, GotoBLAS, ESSL等，并且將-blaslib參數指向該庫位置。

?

?

tar xzvf

./setup.py

--prefix=/opt/mathlibs/scalapack /

--mpibindir=/opt/mpich/intel/bin /

--mpiincdir=/opt/mpich/intel/include /

--blaslib=/opt/mathlibs/gotolib/libgoto.a /

--f90=gfortran /

--downblacs /

--downlapack

?

root@node8:/softwareBAK/mathlibs/scalapack/scalapack_installer_0.96#./setup.py --prefix=/opt/mathlibs/scalapack --mpibindir=/opt/mpich/ch-p4/bin --mpiincdir=/opt/mpich/ch-p4/include --blaslib=/opt/mathlibs/gotolib/1.1.26/libgoto.a --f90=gfortran --downblacs --downlapack

========================================

Setting up the framework

?

Install directory is... /opt/mathlibs/scalapack

MPI bin dir is /opt/mpich/ch-p4/bin

MPI include dir is /opt/mpich/ch-p4/include

The Fortran 90/95 compiler is gfortran

mpicc : /opt/mpich/ch-p4/bin/mpicc

mpif77 : /opt/mpich/ch-p4/bin/mpif77

Checking if mpicc works... yes

Checking if mpif77 works... yes

Checking if the Fortran 90/95 compiler works... yes

Setting Fortran mangling... -DAdd_

Setting download command...

Checking availability of urllib... available

Testing urllib... not working

Checking availablility of wget... available

Testing wget... working

Setting ranlib command... /usr/bin/ranlib

Detecting Fortran 77 compiler... unknown

Detecting C compiler... unknown

Selected C compiler flags: -O3

Selected Fortran77 compiler flags: -O3

Selected loader flags (C main):

Selected loader flags (F77 main):

Selected NOOPT flags:

Checking loader... works

?

========================================

BLAS installation/verification

========================================

Checking if provided BLAS works... yes

?

========================================

Lapack installation/verification

========================================

Download and install LAPACK from netlib.org

Download LAPACK... done

Unzip and untar LAPACK... done

Installing lapack-3.2.1 ...

Setting ETIME... EXT_ETIME

Writing make.inc... done.

Compiling lapack-3.2.1 (this will take several minutes)... Installation of LAPACK successful.

(log is in /opt/mathlibs/scalapack/log/laplog )

?

========================================

BLACS installation/verification

========================================

Downloading BLACS... done

Unzip and untar BLACS... done

Setting TRANSCOMM... -DCSameF77

?

Writing Bmake.inc... done.

Compiling BLACS...done

(log is in /opt/mathlibs/scalapack/log/blacslog )

?

========================================

ScaLAPACK installer is starting now. Buckle up!

========================================

Installing scalapack-1.8.0 ...

Writing SLmake.inc... done.

Compiling ScaLAPACK... Installation of ScaLAPACK successful..

(log is in /opt/mathlibs/scalapack/log/scalog )

Compiling test routines...

done

done. ScaLAPACK is installed. Use it in moderation :-)

?

******************************************************

******************************************************

?

ScaLAPACK installation completed.

?

?

Your BLAS library is:

/opt/mathlibs/gotolib/1.1.26/libgoto.a

?

Your BLACS libraries are:

/opt/mathlibs/scalapack/lib/blacs.a

/opt/mathlibs/scalapack/lib/blacsC.a

/opt/mathlibs/scalapack/lib/blacsF77.a

?

Your LAPACK library is:

/opt/mathlibs/scalapack/lib/libreflapack.a

?

Your ScaLAPACK library is:

/opt/mathlibs/scalapack/lib/libscalapack.a

?

Log messages are in the

/opt/mathlibs/scalapack/log

directory.

?

The Scalapack testing programs are in:

/opt/mathlibs/scalapack/build/scalapack-1.8.0/TESTING

?

The

/opt/mathlibs/scalapack/build

directory contains the source code of the libraries

that have been installed. It can be removed at this time.

?

******************************************************

******************************************************

?

?

?

?

其他參考:

?

BLACS安裝說明

http://www.netlib.org/blacs/.

?

Installing and testing BLACS and ScaLapack using gnu/pgi compilers
http://luke.eng.uci.edu/rmc3po/scalapack.notes

?

論壇:

http://icl.cs.utk.edu/lapack-forum

?

?

錯誤1:

COMMON: in check_linking: cannot link

Cannot link a C main program to a Fortran77 subroutine

Make sure that the appropriate flags are passed to the linker.

command is: /opt/mpich/intel/bin/mpif77 -o lnk tmpf.o tmpc.o

error is:

****************************************

tmpc.o: In function `main':

tmpc.c:(.text+0x0): multiple definition of `main'

/opt/intel/Compiler/11.1/059/lib/intel64/for_main.o:/export/users/nbtester/efi2linux_nightly/branch-11_1/20091013_000000/libdev/frtl/src/libfor/for_main.c:(.text+0x0): first defined here

ld: Warning: size of symbol `main' changed from 80 in /opt/intel/Compiler/11.1/059/lib/intel64/for_main.o to 64 in tmpc.o

/opt/intel/Compiler/11.1/059/lib/intel64/for_main.o: In function `main':

/export/users/nbtester/efi2linux_nightly/branch-11_1/20091013_000000/libdev/frtl/src/libfor/for_main.c:(.text+0x38): undefined reference to `MAIN__'

?

?

解決方法:

mpich是用intel編譯器編譯的，用gcc重新編譯一個即可。

?

錯誤2:

ScaLAPACK: error building ScaLAPACK test routines

stderr:

****************************************

/opt/mathlibs/gotolib/1.1.26/libgoto.a(sgemm_incopy.o): In function `sgemm_incopy':

../kernel/x86_64/../generic/gemm_ncopy_8.c:(.text+0x9a9): undefined reference to `_intel_fast_memcpy'

collect2: ld returned 1 exit status

make[1]: *** [/opt/mathlibs/scalapack/build/scalapack-1.8.0/TESTING/xspblas1tst] Error 1

make: *** [pblasexe] Error 2

?

解決：
libgoto.a是用intel編譯器編譯的，換成gcc編譯即可

?

?

總結

以上是生活随笔為你收集整理的BLAS+BLACS+LAPACK+SCALAPACK安装的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。