Mac自帶了svn服務端和客戶端，所以只需要簡單配置一下就可以使用。

?

1、創建svn repository

?

Shell代碼??

svnadmin?create?/Users/qiruihua/svnserver/repository ?

?

2、配置svn用戶權限/Users/qiruihua/svnserver/repository/conf/目錄下存在3個文件：authz、passwd、svnserve.conf

?

authz，內容如下：

?

Mac代碼??

### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### ?- a single user,
### ?- a group of users defined in a special [groups] section,
### ?- an alias defined in a special [aliases] section,
### ?- all authenticated users, using the '$authenticated' token,
### ?- only anonymous users, using the '$anonymous' token,
### ?- anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').


[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average


[groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe


# [/foo/bar]
# harry = rw
# &joe = r
# * =


# [repository:/baz/fuz]
test=qiruihua
[/]
qiruihua=rw
# @harry_and_sally = rw
# * = r

?

passwd，內容如下：

?

Mac代碼??

### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.


[users]
qiruihua=123
# harry = harryssecret
# sally = sallyssecret

?

svnserve.conf，內容如下：

?

Mac代碼??

### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. ?(If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)


### Visit http://subversion.apache.org/ for more information.


[general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete?
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file. ?Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. ?Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. ?If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. ?The default realm
### is repository's uuid.
# realm = My First Repository
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above. ?Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none


[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256

?

3、啟動服務器

?

Mac代碼??

svnserve?-d?-r?/Users/qiruihua/svnserver/repository??

?

沒有任何提示就說明啟動成功了。

?

4、將項目導入svn庫

?

Mac代碼??

svn?import?/Users/qiruihua/projects/demo/?svn://localhost/svn/repository/demo?--username qiruihua --password?123?-m?"Initial?import"??

?

5、簽出項目

?

Mac代碼??

svn?checkout?svn://127.0.0.1/svn/repository/demo?--username=qiruihua --password=123?

啟動svnserve：
svnserve -d -r?/Users/weike/svnserver/repository

結束服務可以用 killall -9 svnserve
svn地址：svn://localhost
注：很可能會遇到權限問題，可使用 sudo 命令 sudo chflags -R nouchg /opt/svn/repos

sudo chmod -R 755 /opt/svn/repos

總結

以上是生活随笔為你收集整理的Mac下配置svn服务器的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。