在新買的華碩筆記本電腦安裝linux手記

(4頁)

本資源提供全文預覽，點擊全文預覽即可全文預覽,如果喜歡文檔就下載吧，查找使用更方便哦！

19.90 積分

在新買的華碩 I3 筆記本電腦安裝 linux 手記硬件配置：華碩(ASUS)A42EI37JV-SL i3-370M 2G 320G NVIDIA GT335 1G 獨顯 安裝系統 Ubuntu 10.04 32bit應用程序 Cadence IC5141_U6Mentor Calibre 20080. Clean install of Ubuntu Desktop (這步我沒有執行)1.Install additional packages necessary for Cadence.Maybe some of these packages are already installed on your system, but to be sure try to install all of them (of course, all of these could be installed in one go):Code:代碼代碼:sudo apt-get install libelf1sudo apt-get install kshsudo apt-get install nscdsudo apt-get install policykitsudo apt-get install ureadaheadsudo apt-get install csh新裝的 Ubuntu 有些無法執行 apt-get，需要在重新配置 apt－get 的網絡。2.Install libstdc++2.10-glibc2.2 package.Unfortunately, this package is absent in recent Ubuntu versions, so download it from Ubuntu Dapper repository: http://packages.ubuntu.com/dapper/libstdc++2.10-glibc2.2and install it:Glibc 2.2 是支持 32 位系統的，暫時沒有在 64 位系統嘗試安裝。估計是無法安裝的。Code:代碼代碼:sudo dpkg -i libstdc++2.10-glibc2.2_2.95.4-24_i386.deb3. Make some necessary linksCode:代碼代碼:sudo ln -s /usr/bin/awk /bin/awksudo ln -s /usr/bin/firefox /usr/bin/netscapesudo ln -s /usr/lib/libstdc++-3-libc6.2-2-2.10.0.so /usr/lib/libstdc++-libc6.1-1.so.24. Install en_US locale (Ubuntu uses UTF8 by default):Code:代碼代碼:sudo locale-gen en_US5. Probably you will need to make some changes in your xorg configuration:(這步我沒有操作，好像不需要)Add following strings into /etc/X11/xorg.confCode:代碼代碼:Section “Extensions“Option “Composite“ “Disable“EndSection(if you do not have /etc/X11/xorg.conf either it is not necessary for your graphics card, or just create this file and add above lines to it)Reconfigure your xserver:Code:代碼代碼:sudo dpkg-reconfigure -phigh xserver-xorgand restart session (NOTE: it will restart your current session!):Code:代碼代碼:sudo /etc/init.d/gdm restart6. Install Cadence IC5141, IC610, Assura, MMSIM61 etc.在 Ubuntu 環境下，IC5141 是無法正常安裝的，必須將在其它機器上已經安裝完成的軟件打包 copy 過來。這樣即可直接使用。7. In order to use cdsdoc you will have to make some changes in Cadence itself:a) Locate all instances of libgcc_s.so and libgcc_s.so.1 in Cadence hierarchy (they will be located in PACKAGENAME/tools/lib/ or PACKAGENAME/linux/tools/lib/ , where PACKAGENAME is mmsim61 or assura or ic610 or ic5141 whatsoever) and rename all of them to *.old, e.g.Code:代碼代碼:mv mmsim61/tools/lib/libgcc_s.so mmsim61/tools/lib/libgcc_s.so.oldmv mmsim61/tools/lib/libgcc_s.so.1 mmsim61/tools/lib/libgcc_s.so.1.oldIt is very important that you will rename all instances of libgcc_s.so and libgcc_s.so.1 that are in Cadence hierarchy but leave /lib/libgcc_s.so.1 intact.(這步非常重要)b) Locate all instances of cdsdoc and obServer files (they will reside in PACKAGENAME/tools/bin/ or PACKAGENAME/tools/bin/ , where PACKAGENAME is mmsim61 or assura or ic610 or ic5141 whatsoever) and open them in the text editor (e.g. nano) and make the following changes:Code:代碼代碼:#Standard x86 systems# LD_ASSUME_KERNEL=2.2.5LD_ASSUME_KERNEL=2.6.31export LD_ASSUME_KERNELInstead of 2.2.5 you need to write your own kernel version. Current version of your kernel you could find usingCode:代碼代碼:uname -rYou'll get something likeCode:代碼代碼:2.6.31-18-genericYou need to use first three numbers as shown above.If there is no such a section in obServer file, just leave it intact.It is important that you will change cdsdoc (and obServer) that are in your PATH, but you'd better change all of them just in case.8.在運行 calibre 的時候，報一個錯誤類似與 “libstdc++.so.5”只需要將 libstdc++.so.5 copy 到/usr/lib 目錄下即可sudo cp /home/peian/Documents/libstdc++.so.5 /usr/libThat's it. At least for me - everything works fine on my Ubuntu 9.10 386 Desktops. If you'll find that I've forgot something, and you are not able to run Candence on Ubuntu after you make all these changes, let's try to understand what is going wrong together. 關?鍵?詞： 華碩 筆記本電腦 安裝 linux 手記

?天天文庫所有資源均是用戶自行上傳分享，僅供網友學習交流，未經上傳用戶書面授權，請勿作他用。

總結

以上是生活随笔為你收集整理的华硕笔记本装linux系统教程视频,在新买的华硕笔记本电脑安装linux手记的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。