RH要先設置網卡#netconf

把IP和DNS設置成如下的。

IP地址：192.168.0.1

掩碼：

255.255.255.0

DNS (下面以廣東佛山為例，各地的ISP 均有不同的DNS )

202.96.134.133

202.96.168.68

不要設置網關

然后再來設置ADSL。這一處，我們要用命令。

#adsl-setup

Welcome to the Roaring Penguin ADSL client setup. First, I will run some checks on your system to make sure the PPPoE

client is installed properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default XXX): 在這里輸入ADSL的用戶名

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modemFor Solaris, this is likely to be something like /dev/hme0.

For Linux, it will be ethn, where 'n' is a number.(default eth0):如果一張網卡就設置寫上eth0

Do you want the link to come up on demand, or stay up continuously?If you want it to come up on demand, enter the idle

time in secondsafter which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two

letters, lower-case.)NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems

with demand-activated links.

>>> Enter the demand value (default no):不用寫什么

DNS

Please enter the IP address of your ISP's primary DNS server.If your ISP claims that 'the server will provide DNS addresses',

enter 'server' (all lower-case) here.

If you just press enter, I will assume you know what you are doing and not modify your DNS setup.

>>> Enter the DNS information here:在這里寫上202.96.134.133 下一個DNS是202.96.168.68

PASSWORD

>>> Please enter your PPPoE password:輸入密碼

>>> Please re-enter your PPPoE password:再輸入一次

FIREWALLING

Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more

sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine,

you must choose 'NONE' and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers

like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections whichallocate a privileged

source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules. You are responsible

for ensuring the security of your machine. You are STRONGLY

recommended to use some kind of firewall rules.

1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway

for a LAN

>>> Choose a type of firewall (0-2):這里添寫為2

** Summary of what you entered **

Ethernet Interface: eth0

User name: XXX

Activate-on-demand: No

DNS: Do not adjust

Firewalling: MASQUERADE

>>> Accept these settings and adjust configuration files (y/n)?

弄完后，就按一個y鍵。

用adsl-start來啟動ADSL。如果不成功就重啟一下計算機。

如果再不成功呢？？？？要發以下文件的內容：

/etc/sysconfig/network-scripts/ifcfg-eth0

/etc/ppp/pppoe.conf

/etc/resolv.conf

/etc/sysconfig/network-scripts/net_cnx_up

本文出自：億恩科技【www.enkj.com】

總結

以上是生活随笔為你收集整理的linux拨号软件,Linux 下的宽带ADSL拨号软件“rp-pppoe”使用设置的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。