文章目錄

• 模型配置文件
• 網絡可視化
• 搭建網絡
• 檢測模塊

---

模型配置文件

YOLO v5的模型配置文件都一樣，區別在層深depth_multiple和寬度width_multiple控制不一樣。YOLO v5s是最簡潔的一個模型，深度為1就是說沒有重復模塊，因此方便用來分析其結構。模型的具體深度需要跑一下才能看到，或者將depth_multiple與各層 number相乘，按下式計算：

n = max(round(n * gd), 1) if n > 1 else n # depth gain

下面給出了具體的 YOLO v5s 參數配置信息：

from n params module arguments layer cin cout ---------------------------------------------------------------------------------------------------------------------------------------------0 -1 1 3520 models.common.Focus [3, 32, 3] Focus 3 321 -1 1 18560 models.common.Conv [32, 64, 3, 2] Conv 32 642 -1 1 19904 models.common.BottleneckCSP [64, 64, 1] BottleneckCSP 64 643 -1 1 73984 models.common.Conv [64, 128, 3, 2] Conv 64 1284 -1 1 161152 models.common.BottleneckCSP [128, 128, 3] BottleneckCSP 128 1285 -1 1 295424 models.common.Conv [128, 256, 3, 2] Conv 128 2566 -1 1 641792 models.common.BottleneckCSP [256, 256, 3] BottleneckCSP 256 2567 -1 1 1180672 models.common.Conv [256, 512, 3, 2] Conv 256 5128 -1 1 656896 models.common.SPP [512, 512, [5, 9, 13]] SPP 512 5129 -1 1 1248768 models.common.BottleneckCSP [512, 512, 1, False] BottleneckCSP 512 51210 -1 1 131584 models.common.Conv [512, 256, 1, 1] Conv 512 25611 -1 1 0 torch.nn.modules.upsampling.Upsample [None, 2, 'nearest'] Upsample 512 25612 [-1, 6] 1 0 models.common.Concat [1] Concat 512 51213 -1 1 378624 models.common.BottleneckCSP [512, 256, 1, False] BottleneckCSP 512 25614 -1 1 33024 models.common.Conv [256, 128, 1, 1] Conv 256 12815 -1 1 0 torch.nn.modules.upsampling.Upsample [None, 2, 'nearest'] Upsample 256 12816 [-1, 4] 1 0 models.common.Concat [1] Concat 256 25617 -1 1 95104 models.common.BottleneckCSP [256, 128, 1, False] BottleneckCSP 256 12818 -1 1 2322 torch.nn.modules.conv.Conv2d [128, 18, 1, 1] Conv2d 128 25519 -2 1 147712 models.common.Conv [128, 128, 3, 2] Conv 128 12820 [-1, 14] 1 0 models.common.Concat [1] Concat 128 25621 -1 1 313088 models.common.BottleneckCSP [256, 256, 1, False] BottleneckCSP 256 25622 -1 1 4626 torch.nn.modules.conv.Conv2d [256, 18, 1, 1] Conv2d 256 25523 -2 1 590336 models.common.Conv [256, 256, 3, 2] Conv 256 25624 [-1, 10] 1 0 models.common.Concat [1] Concat 256 51225 -1 1 1248768 models.common.BottleneckCSP [512, 512, 1, False] BottleneckCSP 512 51226 -1 1 9234 torch.nn.modules.conv.Conv2d [512, 18, 1, 1] Conv2d 512 25527 [-1, 22, 18] 1 0 Detect [1, anchors Detect 512 255

網絡可視化

根據配置文件定義，將網絡進行圖1劃分：

歸納整理得到圖2：

搭建網絡

根據網絡劃分和梳理的連接就可以自行搭建網絡了。

class YoloModel(nn.Module):anchors = [[116, 90, 156, 198, 373, 326],[30, 61, 62, 45, 59, 119],[10, 13, 16, 30, 33, 23]]def __init__(self, class_num=1, input_ch=3):super(YoloModel, self).__init__()self.build_model(class_num)# Build strides, anchorss = 128 # 2x min strideself.Detect.stride = torch.tensor([s / x.shape[-2] for x in self.forward(torch.zeros(1, input_ch, s, s))]) # forwardself.Detect.anchors /= self.Detect.stride.view(-1, 1, 1)check_anchor_order(self.Detect)self.stride = self.Detect.stride# print('Strides: %s' % self.Detect.stride.tolist()) # [8.0, 16.0, 32.0]print("Input size must be multiple of", self.stride.max().item())torch_utils.initialize_weights(self)self._initialize_biases() # only run once# model_info(self)def build_model(self, class_num):# output channelsself.class_num = class_numself.anchors_num = len(self.anchors[0]) // 2self.output_ch = self.anchors_num * (5 + class_num)# backboneself.Focus = Focus(c1=3, c2=32, k=3, s=1)self.CBL_1 = self.CBL(c1=32, c2=64, k=3, s=2)self.CSP_1 = BottleneckCSP(c1=64, c2=64, n=1)self.CBL_2 = self.CBL(c1=64, c2=128, k=3, s=2)self.CSP_2 = BottleneckCSP(c1=128, c2=128, n=3)self.CBL_3 = self.CBL(c1=128, c2=256, k=3, s=2)self.CSP_3 = BottleneckCSP(c1=256, c2=256, n=3)self.CBL_4 = self.CBL(c1=256, c2=512, k=3, s=2)self.SPP = SPP(c1=512, c2=512, k=(5, 9, 13))# headself.CSP_4 = BottleneckCSP(c1=512, c2=512, n=1, shortcut=False)self.CBL_5 = self.CBL(c1=512, c2=256, k=1, s=1)self.Upsample_5 = nn.Upsample(size=None, scale_factor=2, mode="nearest")self.Concat_5 = Concat(dimension=1)self.CSP_5 = BottleneckCSP(c1=512, c2=256, n=1, shortcut=False)self.CBL_6 = self.CBL(c1=256, c2=128, k=1, s=1)self.Upsample_6 = nn.Upsample(size=None, scale_factor=2, mode="nearest")self.Concat_6 = Concat(dimension=1)self.CSP_6 = BottleneckCSP(c1=256, c2=128, n=1, shortcut=False)self.Conv_6 = nn.Conv2d(in_channels=128, out_channels=self.output_ch, kernel_size=1, stride=1)self.CBL_7 = self.CBL(c1=128, c2=128, k=3, s=2)self.Concat_7 = Concat(dimension=1)self.CSP_7 = BottleneckCSP(c1=256, c2=256, n=1, shortcut=False)self.Conv_7 = nn.Conv2d(in_channels=256, out_channels=self.output_ch, kernel_size=1, stride=1)self.CBL_8 = self.CBL(c1=256, c2=256, k=3, s=2)self.Concat_8 = Concat(dimension=1)self.CSP_8 = BottleneckCSP(c1=512, c2=512, n=1, shortcut=False)self.Conv_8 = nn.Conv2d(in_channels=512, out_channels=self.output_ch, kernel_size=1, stride=1)# detectionself.Detect = Detect(nc=self.class_num, anchors=self.anchors)def forward(self, x):# backbonex = self.Focus(x) # 0x = self.CBL_1(x)x = self.CSP_1(x)x = self.CBL_2(x)y1 = self.CSP_2(x) # 4x = self.CBL_3(y1)y2 = self.CSP_3(x) # 6x = self.CBL_4(y2)x = self.SPP(x)# headx = self.CSP_4(x)y3 = self.CBL_5(x) # 10x = self.Upsample_5(y3)x = self.Concat_5([x, y2])x = self.CSP_5(x)y4 = self.CBL_6(x) # 14x = self.Upsample_6(y4)x = self.Concat_6([x, y1])y5 = self.CSP_6(x) # 17output_1 = self.Conv_6(y5) # 18 output_1x = self.CBL_7(y5)x = self.Concat_7([x, y4])y6 = self.CSP_7(x) # 21output_2 = self.Conv_7(y6) # 22 output_2x = self.CBL_8(y6)x = self.Concat_8([x, y3])x = self.CSP_8(x)output_3 = self.Conv_8(x) # 26 output_3output = self.Detect([output_1, output_2, output_3])return output@staticmethoddef CBL(c1, c2, k, s):return nn.Sequential(nn.Conv2d(c1, c2, k, s, autopad(k), bias=False),nn.BatchNorm2d(c2),nn.LeakyReLU(0.1, inplace=True),)def _initialize_biases(self, cf=None): # initialize biases into Detect(), cf is class frequency# cf = torch.bincount(torch.tensor(np.concatenate(dataset.labels, 0)[:, 0]).long(), minlength=nc) + 1.conv_layers = [self.Conv_6, self.Conv_7, self.Conv_8]for conv_layer, s in zip(conv_layers, self.Detect.stride):bias = conv_layer.bias.view(self.anchors_num, -1)bias[:, 4] += math.log(8 / (640 / s) ** 2) # initialize confidencebias[:, 5:] += math.log(0.6 / (self.class_num - 0.99)) if cf is None else torch.log(cf / cf.sum()) # clsconv_layer.bias = torch.nn.Parameter(bias.view(-1), requires_grad=True)

檢測模塊

關于上圖中的 Detect 模塊需要指出的是，在ONNX中被轉化成了 reshape + transpose，這是因?yàn)槟Ｐ驮趯?dǎo)入ONNX時設置了參數self.Detect.export = True，根據檢測端的源碼可知，檢測端在訓練和模型導出時直接輸出的是三個預測張量，其shape = (bs, na, H, W, no)，其中na*no=255，即圖2中輸出張量的通道數。這一變換過程對應源碼：

bs, _, ny, nx = x[i].shape # x(bs,na×no,20,20) to x(bs,na,20,20,no) x[i] = x[i].view(bs, self.na, self.no, ny, nx).permute(0, 1, 3, 4, 2).contiguous()

變換結果：

input.shape = torch.Size([1, 3, 640, 640]) # NCHW
torch.Size([1, 3, 80, 80, 85])
torch.Size([1, 3, 40, 40, 85])
torch.Size([1, 3, 20, 20, 85])

而在Python端進行推理預測時，輸出則是tuple(torch.cat(z, 1), x)，直接對第一項進行處理即可：共計25200個預測框，每個預測框包含了80個類的預測概率、4個邊框坐標和1個置信度。就是說，在推理過程中，多進行了歸納合并這一步。

torch.Size([1, 25200, 85])

$$(80\times 80+40\times 40+20\times 20)\times 3=25200$$

下面是完整的Detect模塊定義：

class Detect(nn.Module):def __init__(self, nc=80, anchors=()): # detection layersuper(Detect, self).__init__()self.stride = None # strides computed during buildself.nc = nc # number of classesself.no = nc + 5 # channels of output tensorself.nl = len(anchors) # number of detection layersself.na = len(anchors[0]) // 2 # number of anchorsself.grid = [torch.zeros(1)] * self.nl # init grida = torch.tensor(anchors).float().view(self.nl, -1, 2)self.register_buffer('anchors', a) # shape(nl,na,2)self.register_buffer('anchor_grid', a.clone().view(self.nl, 1, -1, 1, 1, 2)) # shape(nl,1,na,1,1,2)self.export = False # model exportdef forward(self, x):# x = x.copy() # for profilingz = [] # inference outputself.training |= self.exportfor i in range(self.nl):bs, _, ny, nx = x[i].shape # x(bs,na×no,20,20) to x(bs,na,20,20,no)x[i] = x[i].view(bs, self.na, self.no, ny, nx).permute(0, 1, 3, 4, 2).contiguous()if not self.training: # inferenceif self.grid[i].shape[2:4] != x[i].shape[2:4]:self.grid[i] = self._make_grid(nx, ny).to(x[i].device)y = x[i].sigmoid()y[..., 0:2] = (y[..., 0:2] * 2. - 0.5 + self.grid[i].to(x[i].device)) * self.stride[i] # xyy[..., 2:4] = (y[..., 2:4] * 2) ** 2 * self.anchor_grid[i] # whz.append(y.view(bs, -1, self.no))return x if self.training else (torch.cat(z, 1), x)

總結

以上是生活随笔為你收集整理的YOLOv5s网络结构详解的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。