#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h> //定義s3c2410的GPIO
#include <mach/hardware.h> //定義操作s3c2410的GPIO的函數?
#include <linux/device.h> //自動創建設備文件應該包含的頭文件
#include <mach/gpio.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
#include <asm/uaccess.h>






/*
#define GPIO_DRDY S3C2410_GPG(0)
#define GPIO_START S3C2410_GPG(1)
#define GPIO_RESET S3C2410_GPG(2)
*/


#define ADS124X_REG_MUX0 ? ? ?0x00
#define ADS124X_REG_VBIAS ? ? 0x01
#define ADS124X_REG_MUX1 ? ? ?0x02
#define ADS124X_REG_SYS0 ? ? ?0x03
#define ADS124X_REG_OFC0 ? ? ?0x04
#define ADS124X_REG_OFC1 ? ? ?0x05
#define ADS124X_REG_OFC2 ? ? ?0x06
#define ADS124X_REG_FSC0 ? ? ?0x07
#define ADS124X_REG_FSC1 ? ? ?0x08
#define ADS124X_REG_FSC2 ? ? ?0x09
#define ADS124X_REG_IDAC0 ? ? 0x0a
#define ADS124X_REG_IDAC1 ? ? 0x0b
#define ADS124X_REG_GPIOCFG ? 0x0c
#define ADS124X_REG_GPIODIR ? 0x0d
#define ADS124X_REG_GPIODAT ? 0x0e


/* SPI Commands */
#define ADS124X_USER_DEFINE ? 0x64
#define ADS124X_SPI_INIT ? ? ?(0x00 + ADS124X_USER_DEFINE)
#define ADS124X_SPI_RADC ? ? ?(0x01 + ADS124X_USER_DEFINE)
#define ADS124X_SPI_PT2T ? ? ?(0x02 + ADS124X_USER_DEFINE)
#define ADS124X_SPI_TEST ? ? ?(0x03 + ADS124X_USER_DEFINE)




#define ADS124X_SPI_WAKEUP ? ?0x00
#define ADS124X_SPI_SLEEP ? ? 0x02
#define ADS124X_SPI_SYNC1 ? ? 0x04
#define ADS124X_SPI_SYNC2 ? ? 0x04
#define ADS124X_SPI_RESET ? ? 0x06
#define ADS124X_SPI_NOP ? ? ? 0xff
#define ADS124X_SPI_RDATA ? ? 0x12
#define ADS124X_SPI_RDATAC ? ?0x14
#define ADS124X_SPI_SDATAC ? ?0x16
#define ADS124X_SPI_RREG ? ? ?0x20
#define ADS124X_SPI_WREG ? ? ?0x40
#define ADS124X_SPI_SYSOCAL ? 0x60
#define ADS124X_SPI_SYSGCAL ? 0x61
#define ADS124X_SPI_SELFOCAL ?0x62


#define ADS124X_SINGLE_REG ? ?0x00
#define ADS124X_DOUBLE_REG ? ?0x01


// about SYS0 : System Control Register 0
#define ? ? ? ? PGAGain_1 ? ? ? ? ? ? ? ? ? ? ? ? 0x00
#define ? ? ? ? PGAGain_2 ? ? ? ? ? ? ? ? ? ? ? ? 0x10
#define ? ? ? ? PGAGain_4 ? ? ? ? ? ? ? ? ? ? ? ? 0x20
#define ? ? ? ? PGAGain_8 ? ? ? ? ? ? ? ? ? ? ? ? 0x30
#define ? ? ? ? PGAGain_16 ? ? ? ? ? ? ? ? ? ? ? ?0x40
#define ? ? ? ? PGAGain_32 ? ? ? ? ? ? ? ? ? ? ? ?0x50
#define ? ? ? ? PGAGain_64 ? ? ? ? ? ? ? ? ? ? ? ?0x60
#define ? ? ? ? PGAGain_128 ? ? ? ? ? ? ? ? ? ? ? 0x70
#define ? ? ? ? DataRate_5 ? ? ? ? ? ? ? ? ? ? ? ?0x00
#define ? ? ? ? DataRate_10 ? ? ? ? ? ? ? ? ? ? ? ? 0x01
#define ? ? ? ? DataRate_20 ? ? ? ? ? ? ? ? ? ? ? ? 0x02
#define ? ? ? ? DataRate_40 ? ? ? ? ? ? ? ? ? ? ? ? 0x03
#define ? ? ? ? DataRate_80 ? ? ? ? ? ? ? ? ? ? ? ? 0x04
#define ? ? ? ? DataRate_160 ? ? ? ? ? ? ? ? ? ? ? ?0x05
#define ? ? ? ? DataRate_320 ? ? ? ? ? ? ? ? ? ? ? ?0x06
#define ? ? ? ? DataRate_640 ? ? ? ? ? ? ? ?0x07
#define ? ? ? ? DataRate_1000 ? ? ? ? ? ? ? ?0x08
#define ? ? ? ? DataRate_2000 ? ? ? ? ? ? ? ?0x09
// about MUX1: Multiplexer Control Register 1
#define ?CLK_Inter ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0x00
#define ?CLK_Exter ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0x80
#define ?REF_Inter_AlwaysOn ? ? ? ? ? ? ? ? ? ? ? ? 0x20 ?// selecte internal reference and always open ?
#define ?REF_Inter_AlwaysOff ? ? ? ? ? ? ? ? ? ? ? ?0x00 ?// selecte internal reference and always off?
#define ?SELT_REF0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x00 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
#define ?SELT_REF1 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x08
#define ?SELT_Inter ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0x10
#define ?SELT_Inter_REF0 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x18




// about IDAC0: IDAC Control Register 0
#define ?Drdy_Mode_EN ? ? ? ? ? ? ? ? 0x08
#define ?Drdy_Mode_DIS ? ? ? ? ? ? ? ? 0x00


// the magnitude of the excitation current.
// The IDACs require the internal reference to be on.
#define ?IMAG_Off ? ? ? ? ? ? ? ? ? ? ? ? 0x00
#define ?IMAG_50 ? ? ? ? ? ? ? ? ? ? ? ?0x01
#define ?IMAG_100 ? ? ? ? ? ? ? ? ? ? ? ?0x02
#define ?IMAG_250 ? ? ? ? ? ? ? ? ? ? ? ?0x03
#define ?IMAG_500 ? ? ? ? ? ? ? ? ? ? ? ?0x04
#define ?IMAG_750 ? ? ? ? ? ? ? ? ? ? ? ?0x05
#define ?IMAG_1000 ? ? ? ? ? ? ? ? ? ? ? ?0x06
#define ?IMAG_1500 ? ? ? ? ? ? ? ? ? ? ? ?0x07


// about IDAC1: IDAC Control Register 1
// select the output pin for the first current source DAC.
#define ? ? ? ? IDAC1_AIN0 ? ? ? ? ? ? ? ? ? ? ? ?0x00
#define ? ? ? ? IDAC1_AIN1 ? ? ? ? ? ? ? ? ? ? ? ?0x10
#define ? ? ? ? IDAC1_AIN2 ? ? ? ? ? ? ? ? ? ? ? ?0x20
#define ? ? ? ? IDAC1_AIN3 ? ? ? ? ? ? ? ? ? ? ? ?0x30
#define ? ? ? ? IDAC1_AIN4 ? ? ? ? ? ? ? ? ? ? ? ?0x40
#define ? ? ? ? IDAC1_AIN5 ? ? ? ? ? ? ? ? ? ? ? ?0x50
#define ? ? ? ? IDAC1_AIN6 ? ? ? ? ? ? ? ? ? ? ? ?0x60
#define ? ? ? ? IDAC1_AIN7 ? ? ? ? ? ? ? ? ? ? ? ?0x70
#define ? ? ? ? IDAC1_IEXT1 ? ? ? ? ? ? ? ?0x80
#define ? ? ? ? IDAC1_IEXT2 ? ? ? ? ? ? ? ?0x90
#define ? ? ? ? IDAC1_OFF ? ? ? ? ? ? ? ? ? ? ? ?0xC0


// select the output pin for the second current source DAC.
#define ? ? ? ? IDAC2_AIN0 ? ? ? ? ? ? ? ? ? ? ? ?0x00
#define ? ? ? ? IDAC2_AIN1 ? ? ? ? ? ? ? ? ? ? ? ?0x01
#define ? ? ? ? IDAC2_AIN2 ? ? ? ? ? ? ? ? ? ? ? ?0x02
#define ? ? ? ? IDAC2_AIN3 ? ? ? ? ? ? ? ? ? ? ? ?0x03
#define ? ? ? ? IDAC2_AIN4 ? ? ? ? ? ? ? ? ? ? ? ?0x04
#define ? ? ? ? IDAC2_AIN5 ? ? ? ? ? ? ? ? ? ? ? ?0x05
#define ? ? ? ? IDAC2_AIN6 ? ? ? ? ? ? ? ? ? ? ? ?0x06
#define ? ? ? ? IDAC2_AIN7 ? ? ? ? ? ? ? ? ? ? ? ?0x07
#define ? ? ? ? IDAC2_IEXT1 ? ? ? ? ? ? ? ?0x08
#define ? ? ? ? IDAC2_IEXT2 ? ? ? ? ? ? ? ?0x09
#define ? ? ? ? IDAC2_OFF ? ? ? ? ? ? ? ? ? ? ? ?0x0C


/************************************************************************/
/* ads1248 macroinstruction ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? */
/************************************************************************/
// about MUX0: Multiplexer Control Register 0
#define ?P_AIN0 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x00
#define ?P_AIN1 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x08
#define ?P_AIN2 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x10
#define ?P_AIN3 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x18
#define ?P_AIN4 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x20
#define ?P_AIN5 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x28
#define ?P_AIN6 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x30
#define ?P_AIN7 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x38
#define ?N_AIN0 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x00
#define ?N_AIN1 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x01
#define ?N_AIN2 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x02
#define ?N_AIN3 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x03
#define ?N_AIN4 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x04
#define ?N_AIN5 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x05
#define ?N_AIN6 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x06
#define ?N_AIN7 ? ? ? ? ? ? ? ? ? ? ? ? ? ?0x07




#if 0
const float pt100_table[1001] =/*PT100 0-100度對應的電阻值，0.1度間隔*/
{
? ? 100.0000, 100.0391, 100.0782, 100.1172, 100.1563, 100.1954, 100.2345, 100.2736, 100.3126, 100.3517,
? ? 100.3908, 100.4298, 100.4689, 100.5080, 100.5470, 100.5861, 100.6252, 100.6642, 100.7033, 100.7424,
? ? 100.7814, 100.8205, 100.8595, 100.8986, 100.9377, 100.9767, 101.0158, 101.0548, 101.0939, 101.1329,
? ? 101.1720, 101.2110, 101.2501, 101.2891, 101.3282, 101.3672, 101.4062, 101.4453, 101.4843, 101.5234,
? ? 101.5624, 101.6014, 101.6405, 101.6795, 101.7185, 101.7576, 101.7966, 101.8356, 101.8747, 101.9137,
? ? 101.9527, 101.9917, 102.0308, 102.0698, 102.1088, 102.1478, 102.1868, 102.2259, 102.2649, 102.3039,
? ? 102.3429, 102.3819, 102.4209, 102.4599, 102.4989, 102.5380, 102.5770, 102.6160, 102.6550, 102.6940,
? ? 102.7330, 102.7720, 102.8110, 102.8500, 102.8890, 102.9280, 102.9670, 103.0060, 103.0450, 103.0840,
? ? 103.1229, 103.1619, 103.2009, 103.2399, 103.2789, 103.3179, 103.3569, 103.3958, 103.4348, 103.4738,
? ? 103.5128, 103.5518, 103.5907, 103.6297, 103.6687, 103.7077, 103.7466, 103.7856, 103.8246, 103.8636,
? ? 103.9025, 103.9415, 103.9805, 104.0194, 104.0584, 104.0973, 104.1363, 104.1753, 104.2142, 104.2532,
? ? 104.2921, 104.3311, 104.3701, 104.4090, 104.4480, 104.4869, 104.5259, 104.5648, 104.6038, 104.6427,
? ? 104.6816, 104.7206, 104.7595, 104.7985, 104.8374, 104.8764, 104.9153, 104.9542, 104.9932, 105.0321,
? ? 105.0710, 105.1100, 105.1489, 105.1878, 105.2268, 105.2657, 105.3046, 105.3435, 105.3825, 105.4214,
? ? 105.4603, 105.4992, 105.5381, 105.5771, 105.6160, 105.6549, 105.6938, 105.7327, 105.7716, 105.8105,
? ? 105.8495, 105.8884, 105.9273, 105.9662, 106.0051, 106.0440, 106.0829, 106.1218, 106.1607, 106.1996,
? ? 106.2385, 106.2774, 106.3163, 106.3552, 106.3941, 106.4330, 106.4719, 106.5108, 106.5496, 106.5885,
? ? 106.6274, 106.6663, 106.7052, 106.7441, 106.7830, 106.8218, 106.8607, 106.8996, 106.9385, 106.9774,
? ? 107.0162, 107.0551, 107.0940, 107.1328, 107.1717, 107.2106, 107.2495, 107.2883, 107.3272, 107.3661,
? ? 107.4049, 107.4438, 107.4826, 107.5215, 107.5604, 107.5992, 107.6381, 107.6769, 107.7158, 107.7546,
? ? 107.7935, 107.8324, 107.8712, 107.9101, 107.9489, 107.9877, 108.0266, 108.0654, 108.1043, 108.1431,
? ? 108.1820, 108.2208, 108.2596, 108.2985, 108.3373, 108.3762, 108.4150, 108.4538, 108.4926, 108.5315,
? ? 108.5703, 108.6091, 108.6480, 108.6868, 108.7256, 108.7644, 108.8033, 108.8421, 108.8809, 108.9197,
? ? 108.9585, 108.9974, 109.0362, 109.0750, 109.1138, 109.1526, 109.1914, 109.2302, 109.2690, 109.3078,
? ? 109.3467, 109.3855, 109.4243, 109.4631, 109.5019, 109.5407, 109.5795, 109.6183, 109.6571, 109.6959,
? ? 109.7347, 109.7734, 109.8122, 109.8510, 109.8898, 109.9286, 109.9674, 110.0062, 110.0450, 110.0838,
? ? 110.1225, 110.1613, 110.2001, 110.2389, 110.2777, 110.3164, 110.3552, 110.3940, 110.4328, 110.4715,
? ? 110.5103, 110.5491, 110.5879, 110.6266, 110.6654, 110.7042, 110.7429, 110.7817, 110.8204, 110.8592,
? ? 110.8980, 110.9367, 110.9755, 111.0142, 111.0530, 111.0917, 111.1305, 111.1693, 111.2080, 111.2468,
? ? 111.2855, 111.3242, 111.3630, 111.4017, 111.4405, 111.4792, 111.5180, 111.5567, 111.5954, 111.6342,
? ? 111.6729, 111.7117, 111.7504, 111.7891, 111.8279, 111.8666, 111.9053, 111.9441, 111.9828, 112.0215,
? ? 112.0602, 112.0990, 112.1377, 112.1764, 112.2151, 112.2538, 112.2926, 112.3313, 112.3700, 112.4087,
? ? 112.4474, 112.4861, 112.5248, 112.5636, 112.6023, 112.6410, 112.6797, 112.7184, 112.7571, 112.7958,
? ? 112.8345, 112.8732, 112.9119, 112.9506, 112.9893, 113.0280, 113.0667, 113.1054, 113.1441, 113.1828,
? ? 113.2215, 113.2602, 113.2988, 113.3375, 113.3762, 113.4149, 113.4536, 113.4923, 113.5309, 113.5696,
? ? 113.6083, 113.6470, 113.6857, 113.7243, 113.7630, 113.8017, 113.8404, 113.8790, 113.9177, 113.9564,
? ? 113.9950, 114.0337, 114.0724, 114.1110, 114.1497, 114.1884, 114.2270, 114.2657, 114.3043, 114.3430,
? ? 114.3817, 114.4203, 114.4590, 114.4976, 114.5363, 114.5749, 114.6136, 114.6522, 114.6909, 114.7295,
? ? 114.7681, 114.8068, 114.8454, 114.8841, 114.9227, 114.9614, 115.0000, 115.0386, 115.0773, 115.1159,
? ? 115.1545, 115.1932, 115.2318, 115.2704, 115.3091, 115.3477, 115.3863, 115.4249, 115.4636, 115.5022,
? ? 115.5408, 115.5794, 115.6180, 115.6567, 115.6953, 115.7339, 115.7725, 115.8111, 115.8497, 115.8883,
? ? 115.9270, 115.9656, 116.0042, 116.0428, 116.0814, 116.1200, 116.1586, 116.1972, 116.2358, 116.2744,
? ? 116.3130, 116.3516, 116.3902, 116.4288, 116.4674, 116.5060, 116.5446, 116.5831, 116.6217, 116.6603,
? ? 116.6989, 116.7375, 116.7761, 116.8147, 116.8532, 116.8918, 116.9304, 116.9690, 117.0076, 117.0461,
? ? 117.0847, 117.1233, 117.1619, 117.2004, 117.2390, 117.2776, 117.3161, 117.3547, 117.3933, 117.4318,
? ? 117.4704, 117.5090, 117.5475, 117.5861, 117.6247, 117.6632, 117.7018, 117.7403, 117.7789, 117.8174,
? ? 117.8560, 117.8945, 117.9331, 117.9716, 118.0102, 118.0487, 118.0873, 118.1258, 118.1644, 118.2029,
? ? 118.2414, 118.2800, 118.3185, 118.3571, 118.3956, 118.4341, 118.4727, 118.5112, 118.5497, 118.5883,
? ? 118.6268, 118.6653, 118.7038, 118.7424, 118.7809, 118.8194, 118.8579, 118.8965, 118.9350, 118.9735,
? ? 119.0120, 119.0505, 119.0890, 119.1276, 119.1661, 119.2046, 119.2431, 119.2816, 119.3201, 119.3586,
? ? 119.3971, 119.4356, 119.4741, 119.5126, 119.5511, 119.5896, 119.6281, 119.6666, 119.7051, 119.7436,
? ? 119.7821, 119.8206, 119.8591, 119.8976, 119.9361, 119.9746, 120.0131, 120.0516, 120.0900, 120.1285,
? ? 120.1670, 120.2055, 120.2440, 120.2824, 120.3209, 120.3594, 120.3979, 120.4364, 120.4748, 120.5133,
? ? 120.5518, 120.5902, 120.6287, 120.6672, 120.7056, 120.7441, 120.7826, 120.8210, 120.8595, 120.8980,
? ? 120.9364, 120.9749, 121.0133, 121.0518, 121.0902, 121.1287, 121.1672, 121.2056, 121.2441, 121.2825,
? ? 121.3210, 121.3594, 121.3978, 121.4363, 121.4747, 121.5132, 121.5516, 121.5901, 121.6285, 121.6669,
? ? 121.7054, 121.7438, 121.7822, 121.8207, 121.8591, 121.8975, 121.9360, 121.9744, 122.0128, 122.0513,
? ? 122.0897, 122.1281, 122.1665, 122.2049, 122.2434, 122.2818, 122.3202, 122.3586, 122.3970, 122.4355,
? ? 122.4739, 122.5123, 122.5507, 122.5891, 122.6275, 122.6659, 122.7043, 122.7427, 122.7811, 122.8195,
? ? 122.8579, 122.8963, 122.9347, 122.9731, 123.0115, 123.0499, 123.0883, 123.1267, 123.1651, 123.2035,
? ? 123.2419, 123.2803, 123.3187, 123.3571, 123.3955, 123.4338, 123.4722, 123.5106, 123.5490, 123.5874,
? ? 123.6257, 123.6641, 123.7025, 123.7409, 123.7792, 123.8176, 123.8560, 123.8944, 123.9327, 123.9711,
? ? 124.0095, 124.0478, 124.0862, 124.1246, 124.1629, 124.2013, 124.2396, 124.2780, 124.3164, 124.3547,
? ? 124.3931, 124.4314, 124.4698, 124.5081, 124.5465, 124.5848, 124.6232, 124.6615, 124.6999, 124.7382,
? ? 124.7766, 124.8149, 124.8533, 124.8916, 124.9299, 124.9683, 125.0066, 125.0450, 125.0833, 125.1216,
? ? 125.1600, 125.1983, 125.2366, 125.2749, 125.3133, 125.3516, 125.3899, 125.4283, 125.4666, 125.5049,
? ? 125.5432, 125.5815, 125.6199, 125.6582, 125.6965, 125.7348, 125.7731, 125.8114, 125.8497, 125.8881,
? ? 125.9264, 125.9647, 126.0030, 126.0413, 126.0796, 126.1179, 126.1562, 126.1945, 126.2328, 126.2711,
? ? 126.3094, 126.3477, 126.3860, 126.4243, 126.4626, 126.5009, 126.5392, 126.5775, 126.6157, 126.6540,
? ? 126.6923, 126.7306, 126.7689, 126.8072, 126.8455, 126.8837, 126.9220, 126.9603, 126.9986, 127.0368,
? ? 127.0751, 127.1134, 127.1517, 127.1899, 127.2282, 127.2665, 127.3048, 127.3430, 127.3813, 127.4195,
? ? 127.4578, 127.4961, 127.5343, 127.5726, 127.6109, 127.6491, 127.6874, 127.7256, 127.7639, 127.8021,
? ? 127.8404, 127.8786, 127.9169, 127.9551, 127.9934, 128.0316, 128.0699, 128.1081, 128.1464, 128.1846,
? ? 128.2228, 128.2611, 128.2993, 128.3376, 128.3758, 128.4140, 128.4523, 128.4905, 128.5287, 128.5670,
? ? 128.6052, 128.6434, 128.6816, 128.7199, 128.7581, 128.7963, 128.8345, 128.8728, 128.9110, 128.9492,
? ? 128.9874, 129.0256, 129.0638, 129.1021, 129.1403, 129.1785, 129.2167, 129.2549, 129.2931, 129.3313,
? ? 129.3695, 129.4077, 129.4459, 129.4841, 129.5223, 129.5605, 129.5987, 129.6369, 129.6751, 129.7133,
? ? 129.7515, 129.7897, 129.8279, 129.8661, 129.9043, 129.9425, 129.9807, 130.0188, 130.0570, 130.0952,
? ? 130.1334, 130.1716, 130.2098, 130.2479, 130.2861, 130.3243, 130.3625, 130.4006, 130.4388, 130.4770,
? ? 130.5152, 130.5533, 130.5915, 130.6297, 130.6678, 130.7060, 130.7442, 130.7823, 130.8205, 130.8586,
? ? 130.8968, 130.9350, 130.9731, 131.0113, 131.0494, 131.0876, 131.1257, 131.1639, 131.2020, 131.2402,
? ? 131.2783, 131.3165, 131.3546, 131.3928, 131.4309, 131.4691, 131.5072, 131.5453, 131.5835, 131.6216,
? ? 131.6597, 131.6979, 131.7360, 131.7742, 131.8123, 131.8504, 131.8885, 131.9267, 131.9648, 132.0029,
? ? 132.0411, 132.0792, 132.1173, 132.1554, 132.1935, 132.2317, 132.2698, 132.3079, 132.3460, 132.3841,
? ? 132.4222, 132.4603, 132.4985, 132.5366, 132.5747, 132.6128, 132.6509, 132.6890, 132.7271, 132.7652,
? ? 132.8033, 132.8414, 132.8795, 132.9176, 132.9557, 132.9938, 133.0319, 133.0700, 133.1081, 133.1462,
? ? 133.1843, 133.2224, 133.2604, 133.2985, 133.3366, 133.3747, 133.4128, 133.4509, 133.4889, 133.5270,
? ? 133.5651, 133.6032, 133.6413, 133.6793, 133.7174, 133.7555, 133.7935, 133.8316, 133.8697, 133.9078,
? ? 133.9458, 133.9839, 134.0220, 134.0600, 134.0981, 134.1361, 134.1742, 134.2123, 134.2503, 134.2884,
? ? 134.3264, 134.3645, 134.4025, 134.4406, 134.4786, 134.5167, 134.5547, 134.5928, 134.6308, 134.6689,
? ? 134.7069, 134.7450, 134.7830, 134.8211, 134.8591, 134.8971, 134.9352, 134.9732, 135.0112, 135.0493,
? ? 135.0873, 135.1253, 135.1634, 135.2014, 135.2394, 135.2774, 135.3155, 135.3535, 135.3915, 135.4295,
? ? 135.4676, 135.5056, 135.5436, 135.5816, 135.6196, 135.6577, 135.6957, 135.7337, 135.7717, 135.8097,
? ? 135.8477, 135.8857, 135.9237, 135.9617, 135.9997, 136.0377, 136.0757, 136.1137, 136.1517, 136.1897,
? ? 136.2277, 136.2657, 136.3037, 136.3417, 136.3797, 136.4177, 136.4557, 136.4937, 136.5317, 136.5697,
? ? 136.6077, 136.6456, 136.6836, 136.7216, 136.7596, 136.7976, 136.8355, 136.8735, 136.9115, 136.9495,
? ? 136.9875, 137.0254, 137.0634, 137.1014, 137.1393, 137.1773, 137.2153, 137.2532, 137.2912, 137.3292,
? ? 137.3671, 137.4051, 137.4431, 137.4810, 137.5190, 137.5569, 137.5949, 137.6329, 137.6708, 137.7088,
? ? 137.7467, 137.7847, 137.8226, 137.8606, 137.8985, 137.9365, 137.9744, 138.0123, 138.0503, 138.0882,
? ? 138.1262, 138.1641, 138.2020, 138.2400, 138.2779, 138.3158, 138.3538, 138.3917, 138.4296, 138.4676,
? ? 138.5055
};
#endif


static const u16 ads124x_sample_freq_avail[] = { 5, 10, 20, 40, 80, 160,320, 640, 1000, 2000};
static const u8 ads124x_sample_gain_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 };


struct s3c2416_spi_csinfo {
u8 fb_delay;
unsigned line;
void (*set_level)(unsigned line_id, int lvl);
};




typedef struct ?ads124x_s{
struct spi_device *spi;
struct class *ads124x_class;
int major;
int drdy_gpio;
int start_gpio;
int reset_gpio;
int spics_gpio;
u32 vref_mv;
int sample_rate; //采樣率
struct mutex lock;
spinlock_t ? ? ? spi_lock;
struct semaphore fop_sem;
char user_buff[128];
}ads124x;


ads124x ads124x_state;


static int ads124x_stop_reading_continuously(struct ads124x_s *st)
{
u8 cmd[1];
int ret;
cmd[0] = ADS124X_SPI_SDATAC;


ret = spi_write(st->spi, cmd, 1);


return ret;
}


static int ads124x_read_reg(struct ads124x_s *st, u8 reg, u8 *buf)
{
u8 read_cmd[2];
int ret;


read_cmd[0] = ADS124X_SPI_RREG | reg;
read_cmd[1] = ADS124X_SINGLE_REG;
spi_write(st->spi, read_cmd, 2);


ret = spi_read(st->spi, buf, 1);


return ret;
}
static int ads124x_write_reg(struct ads124x_s *st,
? ? u8 reg, u8 *buf, size_t len)
{
u8 write_cmd[3];
int ret;


write_cmd[0] = ADS124X_SPI_WREG | reg;
write_cmd[1] = ADS124X_SINGLE_REG;
write_cmd[2] = *buf;


ret = spi_write(st->spi, write_cmd, 3);


return ret;
}
static u32 ads124x_sample_to_32bit(u8 *sample)
{
int sample32 = 0;
sample32 = sample[0] << 16;
sample32 |= sample[1] << 8;
sample32 |= sample[2];
//return sign_extend32(sample32, 23);
return 0;
}
static void wait_for_drdy(int drdy_gpio)
{
u8 drdy;


for (;;) {
drdy = gpio_get_value(drdy_gpio);
if (!drdy)
return;
//usleep(1000);
}
}


static void ads124x_start(struct ads124x_s *st)
{
gpio_set_value(st->start_gpio, 1);
msleep(200);
return;
}


static int ads124x_convert(struct ads124x_s *st)
{
u8 cmd[1], res[3];
u32 res32;
int ret;
cmd[0] = ADS124X_SPI_RDATA;


ret = spi_write(st->spi, cmd, 1);
wait_for_drdy(st->drdy_gpio);
ret = spi_read(st->spi, res, 3);
res32 = ads124x_sample_to_32bit(res);
return res32;
}
static void ads124x_reset(struct ads124x_s *st)
{
u8 cmd[1];
int ret;


gpio_set_value(st->reset_gpio, 0);
gpio_set_value(st->reset_gpio, 1);


cmd[0] = ADS124X_SPI_RESET;
ret = spi_write(st->spi, cmd, 1);


msleep(200); /* FIXME: that's arbitrary. */
return;
}
//-------------------------------------------------------------------------------
//函數名稱： ADS1248_SetGain
//函數功能: 設置增益
//入口參數： Gain：放大倍數
//出口參數： 無
//-------------------------------------------------------------------------------
static int ads124x_set_pga_gain(struct ads124x_s *st, u8 gain)
{
int ret;
u8 sys0;


mutex_lock(&st->lock);


ret = ads124x_read_reg(st, ADS124X_REG_SYS0, &sys0);


if (ret < 0)
goto release_lock_and_return;


sys0 = (sys0 & 0x8f) | (gain << 4);


ret = ads124x_write_reg(st, ADS124X_REG_SYS0, &sys0, 1);


release_lock_and_return:
mutex_unlock(&st->lock);
return ret;
}
//-------------------------------------------------------------------------------
//函數名稱： ADS1248_SetSPS
//函數功能: 設置采樣率
//入口參數： SPSData：采樣率設置數據
//出口參數： 無
//-------------------------------------------------------------------------------
static int ads124x_set_sample_rate(struct ads124x_s *st)
{
u8 sys0;
int ret;
ret = ads124x_read_reg(st, ADS124X_REG_SYS0, &sys0);
if (ret < 0)
return ret;


sys0 |= 0x0f & st->sample_rate;


ret = ads124x_write_reg(st, ADS124X_REG_SYS0, &sys0, 1);


return ret;
}
//-------------------------------------------------------------------------------
//函數名稱： ADS1248_SelInputChannel
//函數功能: 選擇模擬信號輸入通道
//入口參數： MuxData：正輸入通道|負輸入通道 ?
//出口參數： 無
//-------------------------------------------------------------------------------
void ads124x_set_inputchannel2(struct ads124x_s *st,char muxData)
{
u8 sys0;
? ? ads124x_read_reg(st,ADS124X_REG_MUX0,&sys0);
sys0&=~(0x3F);
sys0|=muxData&(0x3F);
ads124x_write_reg(st,ADS124X_REG_MUX0,&sys0,1);
}
//-------------------------------------------------------------------------------
//函數名稱： ADS1248_SetMuxCal
//函數功能: 選擇系統監測源
//入口參數： MuxData：監測源數據
//出口參數： 無
//-------------------------------------------------------------------------------


void ads124x_select_muxcal(struct ads124x_s *st,u8 MuxData)
{
u8 sys0;
ads124x_read_reg(st,ADS124X_REG_MUX1,&sys0);
sys0&=~(0x07);
sys0|=MuxData&(0x07);
ads124x_write_reg(st,ADS124X_REG_MUX1,&sys0,1);
}
//-------------------------------------------------------------------------------
//函數名稱：
//函數功能:
//入口參數： ?
//出口參數： 無
//-------------------------------------------------------------------------------
void ads124x_set_idac(struct ads124x_s *st,u8 idac1, u8 idac2, u8 idacImage)
{
u8 write_cmd[4];
int ret;


write_cmd[0] = ADS124X_SPI_WREG | ADS124X_REG_IDAC0;
write_cmd[1] = ADS124X_DOUBLE_REG;
write_cmd[2] = idacImage;
write_cmd[3] = idac1|idac2;
ret = spi_write(st->spi, write_cmd, 4);
return;
}
//-------------------------------------------------------------------------------
//函數名稱：
//函數功能:
//入口參數： ?
//出口參數： 無
//-------------------------------------------------------------------------------
void ads124x_set_gainandrate(struct ads124x_s *st,u8 pgaGain, u8 dataRate)
{
u8 write_cmd[3];
int ret;


write_cmd[0] = ADS124X_SPI_WREG | ADS124X_REG_SYS0;
write_cmd[1] = ADS124X_SINGLE_REG;
write_cmd[2] = pgaGain|dataRate;
ret = spi_write(st->spi, write_cmd, 3);
return;
}
//-------------------------------------------------------------------------------
//函數名稱：
//函數功能:
//入口參數： ?
//出口參數： 無
//-------------------------------------------------------------------------------
void ads124x_set_inputchannel(struct ads124x_s *st,u8 positiveChannel, u8 negativeChannel)
{
u8 write_cmd[3];
int ret;


write_cmd[0] = ADS124X_SPI_WREG | ADS124X_REG_MUX0;
write_cmd[1] = ADS124X_SINGLE_REG;
write_cmd[2] = positiveChannel|negativeChannel;
ret = spi_write(st->spi, write_cmd, 3);
return;
}
//-------------------------------------------------------------------------------
//函數名稱：
//函數功能:
//入口參數： ?
//出口參數： 無
//-------------------------------------------------------------------------------
void ads124x_set_reference(struct ads124x_s *st,u8 interVrefOnOff, u8 refSelected)
{
u8 write_cmd[3];
int ret;
write_cmd[0] = ADS124X_SPI_WREG | ADS124X_REG_MUX1;
write_cmd[1] = ADS124X_SINGLE_REG;
write_cmd[2] = interVrefOnOff|refSelected;
ret = spi_write(st->spi, write_cmd, 3);
return;
}


//-------------------------------------------------------------------------------
//函數名稱：
//函數功能:
//入口參數： ?
//出口參數： 無
//-------------------------------------------------------------------------------
u32 ads124x_readadc(struct ads124x_s *st)
{


u32 adcVal = 0;

adcVal = ads124x_convert(st);


return adcVal;
}


void ads124x_spi_test(struct ads124x_s *st)
{
? ? u8 write_cmd[3],res[3];
int ret;
write_cmd[0] = 0x30;
write_cmd[1] = 0x31;
write_cmd[2] = 0x32;

ret = spi_write(st->spi, write_cmd, 3);
? ? printk(KERN_INFO"spi_write ret:%d\n",ret);
ret = spi_read(st->spi, res, 3);
? ? printk(KERN_INFO"spi_read ret:%d\n",ret);


printk(KERN_INFO"spi_read:%s\n",res);
}
#if 0
/*******************************************************************************
* 函數名稱： Name: ADS1248_ResToTemp
* 函數功能: ?: 二分法查表，將PT100的電阻值轉為對應溫度0-100
* 入口參數： ? ? ? ? ? ? ? ?: float resistance
* 出口參數： ? ? ? ? ? ? ? ? ? : float
* @date ? ? ? ? ? ? ? ? ? ? ? ? ? : 2014/10/06
*******************************************************************************/
float ads124x_res2temp(float resistance)
{
? ? u16 low = 0;
? ? u16 mid = sizeof(pt100_table) / sizeof(pt100_table[0]) / 2;
? ? u16 high = sizeof(pt100_table) / sizeof(pt100_table[0]) - 1;


? ? if((resistance < pt100_table[0]) || (resistance > pt100_table[high]))
? ? {
? ? ? ? return -1; // 超限，不做特殊處理
? ? }


? ? while(high >= low)
? ? {
? ? ? ? mid = (high + low) / 2;


? ? ? ? if(resistance >= pt100_table[mid])
? ? ? ? {
? ? ? ? ? ? if(resistance < pt100_table[mid + 1])
? ? ? ? ? ? {
? ? ? ? ? ? ? ? return (0.1 * low + (resistance - pt100_table[mid]) * 0.1 / ((pt100_table[mid + 1]) - pt100_table[mid]));
? ? ? ? ? ? ? ? break;
? ? ? ? ? ? }
? ? ? ? ? ? else
? ? ? ? ? ? {
? ? ? ? ? ? ? ? low = mid + 1;
? ? ? ? ? ? }
? ? ? ? }
? ? ? ? else if(resistance < pt100_table[mid])
? ? ? ? {
? ? ? ? ? ? high = mid - 1;
? ? ? ? }
? ? }
}
#endif


static void ads124x_init(struct ads124x_s *st)
{
#if 0
? ? ? ?char buf1,buf2;
? ? ? ?buf1=0x28;
? ? ? ?buf2=0x08;
? ? ? ?gpio_set_value(st->start_gpio,0);
? ? ? ?gpio_set_value(st->reset_gpio,0);
? ? ? ?mdelay(4);
? ? ? ?gpio_set_value(st->start_gpio,1);
? ? ? ?gpio_set_value(st->reset_gpio,1);


? ? ? ?mdelay(10);
? ? ? ?printk(KERN_INFO "ads124x_open version 1.2 \n");
? ? ? ?ads124x_reset(st);


? ? ? ?ads124x_write_reg(st,ADS124X_REG_MUX1,&buf1,1);
? ? ? ?ads124x_write_reg(st,ADS124X_REG_SYS0,&buf2,1);
? ? ? ?ads124x_set_inputchannel(st,P_AIN0,N_AIN1);
? ? ? ?#ifdef ?USE_INTER_VREF
? ? ? ?ads124x_set_reference(st,REF_Inter_AlwaysOn,SELT_REF0); // 設置內部基準為參考源
? ? ? ?#else
? ? ? ?ads124x_set_reference(st,REF_Inter_AlwaysOn,SELT_Inter); ? // 設置外部REF0為參考源SELT_Inter
? ? ? ?#endif
? ? ? ?mdelay(10);


? ? ? ?ads124x_set_idac(st,IDAC1_AIN0, IDAC2_AIN1, IMAG_1000);


? ? ? ?ads124x_set_gainandrate(st,PGAGain_8,DataRate_20);
#endif
? ? ? ? u8 write_cmd[2],res[3];//max7219實例
? ? ? ? int ret;
? ? ? ? write_cmd[0] = 0x0C;
? ? ? ? write_cmd[1] = 0x01;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x09;
? ? ? ? write_cmd[1] = 0xFF;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x0A;
? ? ? ? write_cmd[1] = 0x08;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x0B;
? ? ? ? write_cmd[1] = 0x03;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);


? ? ? ? write_cmd[0] = 0x01;
? ? ? ? write_cmd[1] = 0x02;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x02;
? ? ? ? write_cmd[1] = 0x06;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x03;
? ? ? ? write_cmd[1] = 0x07;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x04;
? ? ? ? write_cmd[1] = 0x08;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x05;
? ? ? ? write_cmd[1] = 0x02;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x06;
? ? ? ? write_cmd[1] = 0x04;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x07;
? ? ? ? write_cmd[1] = 0x04;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);
? ? ? ? write_cmd[0] = 0x08;
? ? ? ? write_cmd[1] = 0x04;
? ? ? ? ret = spi_write(st->spi, write_cmd, 2);


}








static int ads124x_open(struct inode *inode, struct file *file)
{
int status = 0;
? ? ads124x *ads1248 = &ads124x_state;
if (down_interruptible(&ads124x_state.fop_sem))?
return -ERESTARTSYS;

? ? printk(KERN_INFO "ads124x_open \n");
ads124x_init(&ads124x_state);

? ? up(&ads124x_state.fop_sem);
? ??
? ? file->private_data = ads1248;
return status;
}
static int ads124x_release(struct inode *inode, struct file *file)
{
return 0;
}


static ssize_t ads124x_write(struct file *file, const char __user *data,size_t len, loff_t *ppos)
{
ssize_t status = 0;
? ? ads124x *ads1248 = file->private_data;
? ??

? ? if (down_interruptible(&ads1248->fop_sem))?
? ? ? ? ? ? return -ERESTARTSYS;


? ? if (copy_from_user(ads1248->user_buff, data, len))
? ? {
status = -EFAULT;
}


if (!strnicmp(ads1248->user_buff, "start", 5))?
{

}
? ? ? ? ? ??
? ? up(&ads1248->fop_sem); ? ?


? ? ?
return status;
}
static ssize_t ads124x_read(struct file *filp, char __user *buff, size_t count,
loff_t *offp)
{
size_t len;
ssize_t status = 0;
? ? struct ?ads124x_s *ads1248 = filp->private_data;
? ??
if (!buff)?
return -EFAULT;


if (*offp > 0)?
return 0;

? ? if (down_interruptible(&ads1248->fop_sem))?
? ? ? ? ? ? return -ERESTARTSYS;


? ? sprintf(ads1248->user_buff, "%s\n","Running");

len = strlen(ads1248->user_buff);
?
if (len < count)?
count = len;


if (copy_to_user(buff, ads1248->user_buff, count)) ?{
printk(KERN_ALERT "ads1248_read(): copy_to_user() failed\n");
status = -EFAULT;
} else {
*offp += count;
status = count;
}
? ? ? ? ? ??
? ? up(&ads1248->fop_sem); ? ? ? ?
return 0;
}
static int ads124x_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
? ? u32 ? ? nValue; ? ? ??
? ? ads124x *ads1248 = &ads124x_state;//file->private_data;
? ? switch(cmd)
? ? {
? ? ? ? case ADS124X_SPI_WAKEUP:
? ? ? ? printk(KERN_ALERT "user_buff:%s\n",ads1248->user_buff);
? ? ? ? break;
? ? ? ? case ADS124X_SPI_SLEEP:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_SYNC1:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_NOP:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_RDATA:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_RDATAC:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_SDATAC:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_RREG:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_WREG:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_SYSOCAL:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_SYSGCAL:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_SELFOCAL:
? ? ? ? break;
? ? ? ? case ADS124X_SPI_RADC:
? ? ? ? printk(KERN_INFO "read adc\n");
? ? ? ? ads124x_readadc(ads1248);
? ? ? ? break;
? ? ? ? case ADS124X_SPI_PT2T:
? ? ? ? nValue = ads124x_readadc(ads1248);
? ? ? ? printk(KERN_INFO "%s.%d read adc value%d\n",ads1248->user_buff,ads1248->major,nValue);
? ? ? ??
? ? ? ? //nAdcValue = ads124x_res2temp(nValue);
? ? ? ? //printk(KERN_INFO "PT100:%d,Temp:%f\n",nValue,nAdcValue);
? ? ? ? break;
? ? ? ? case ADS124X_SPI_TEST:
? ? ? ? ads124x_spi_test(ads1248);
? ? ? ? break;
? ? ? ? default:
? ? ? ? break;
? ? }
return 0;
}


static const struct file_operations ads1248_fops = {
.owner = THIS_MODULE,
.open = ads124x_open,
.read = ads124x_read,
.write = ads124x_write,
.unlocked_ioctl = ads124x_ioctl,
.release ? = ads124x_release,
};


static int ads124x_probe(struct spi_device *spi)
{
int ret;
int flags;
struct device *dev;
struct ads124x_s *st;
st = &ads124x_state;
mutex_init(&ads124x_state.lock);

spin_lock_irqsave(&st->spi_lock, flags);
st->spi = spi_dev_get(spi);
spin_unlock_irqrestore(&st->spi_lock, flags);
? ? /*
? ? gpio_request(S3C2410_GPG(0), "DRDY");
gpio_request(S3C2410_GPG(1), "START");
gpio_request(S3C2410_GPG(2), "RESET");


gpio_direction_input(S3C2410_GPG(0));
gpio_direction_output(S3C2410_GPG(1), 0);//s3c_gpio_cfgpin(S3C2410_GPB(1), S3C_GPIO_OUTPUT);s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
gpio_direction_output(S3C2410_GPG(2), 0);


st->drdy_gpio ?= S3C2410_GPG(0);?
st->start_gpio = S3C2410_GPG(1);
st->reset_gpio = S3C2410_GPG(2);


gpio_set_value(st->start_gpio,0);
? ? gpio_set_value(st->reset_gpio,1);
*/
st->major = 0;
ret = register_chrdev(st->major,"ads1248",&ads1248_fops);//注冊字符設備
if(ret < 0)
{
printk("register chr dev failed \n");
return -1;
}


st->major = ret;
sprintf(st->user_buff,"%s","ads1248");
printk(KERN_INFO "ads1248: major number %d\n", st->major);
st->ads124x_class = class_create(THIS_MODULE,"ads1248"); //設備類、、
if(IS_ERR(st->ads124x_class))
{
dev_err(&st->spi->dev, "ads1248: failed to create ads1248 class\n");
goto char_dev_remove;
}
dev = device_create(st->ads124x_class,NULL,MKDEV(st->major,0),NULL,"ads1248");//創建設備節點
if(IS_ERR(st->ads124x_class))
{
dev_err(&st->spi->dev, "ads1248: failed to create ads8344 device\n");
? ? ? ?goto char_dev_remove;
}
return 0;

char_dev_remove:
class_destroy(ads124x_state.ads124x_class);
? unregister_chrdev(st->major, "ads1248");//注銷字符設備
return -1;
}


static int __devexit ads1248_remove(struct spi_device *spi)
{
/*
? ? ?gpio_free(S3C2410_GPG(0));
gpio_free(S3C2410_GPG(1));
gpio_free(S3C2410_GPG(2));
*/
device_destroy(ads124x_state.ads124x_class, MKDEV(ads124x_state.major, 0));
class_destroy(ads124x_state.ads124x_class);
unregister_chrdev(ads124x_state.major, "ads1248");
return 0;
}


static void ?spi_cs_set_level(unsigned line_id, int lvl) {


? ? gpio_request(S3C2410_GPH(14), "SPI_CS");
? ? gpio_direction_output(line_id, lvl);
};


static struct s3c2416_spi_csinfo s3c2416_spi1_csinfo = {
? ? .fb_delay = 100,
? ? .line = S3C2410_GPH(14),
? ? .set_level = spi_cs_set_level,
};


static struct spi_driver ads124x_driver = {
.driver = {
.name = "ads1248",
.owner = THIS_MODULE,
},
.probe = ads124x_probe,
.remove = __devexit_p(ads1248_remove),
};


static struct spi_board_info ads124x_master = {
.modalias = "ads1248",
.max_speed_hz = 8000000,
.bus_num = ?0,
.chip_select = 0,
.mode = SPI_MODE_0,
? ? .irq = IRQ_EINT0,
.controller_data = &s3c2416_spi1_csinfo,
};






static int ?add_spi_device_to_bus(void)
{
? ? struct spi_master *spi_master;
? ? struct spi_device *spi_device;
? ? struct device *pdev;
? ? char buff[64];
? ? int status = 0;


? ? spi_master = spi_busnum_to_master(0);
? ? if (!spi_master)?
? ? {
? ? ? ? printk(KERN_ALERT "spi_busnum_to_master(0) returned NULL\n" );
? ? ? ? printk(KERN_ALERT "Missing modprobe omap2_mcspi?\n");
? ? ? ? return -1;
? ? }


? ? spi_device = spi_alloc_device(spi_master);
? ? if (!spi_device)?
? ? {
? ? ? ? put_device(&spi_master->dev);
? ? ? ? printk(KERN_ALERT "spi_alloc_device() failed\n");
? ? ? ? return -1;
? ? }


? ? /* specify a chip select line */
? ? spi_device->chip_select = 0;//SPI_BUS_CS1;
? ? /* Check whether this SPI bus.cs is already claimed */
? ? snprintf(buff, sizeof(buff), "%s.%u",?
? ? ? ? ? ? ?dev_name(&spi_device->master->dev),spi_device->chip_select);
? ? printk(KERN_INFO "dev_name %s\n",buff);
? ? pdev = bus_find_device_by_name(spi_device->dev.bus, NULL, buff);
? ? if (pdev)
? ? {
? ? ? ? printk(KERN_INFO " spidev0.0 is exist\n");
? ? ? ? spi_dev_put(spi_device);
? ? ? ? if (pdev->driver && pdev->driver->name && strcmp("ads1248", pdev->driver->name))?
? ? ? ? {
? ? ? ? ? ? printk(KERN_ALERT "Driver [%s] already registered for %s\n",pdev->driver->name, buff);
? ? ? ? ? ? status = -1;
? ? ? ? }?
? ? }?
? ? else?
? ? {
? ? ? ? printk(KERN_INFO "add spidev0.0 to kernel\n");
? ? ? ? spi_device->max_speed_hz = 15000000;//SPI_BUS_SPEED;
? ? ? ? spi_device->mode = SPI_MODE_0;
? ? ? ? spi_device->bits_per_word = 8;
? ? ? ? spi_device->irq = -1;
? ? ? ? spi_device->controller_state = NULL;
? ? ? ? spi_device->controller_data = &s3c2416_spi1_csinfo; ? ? ? ? ? ?//重點再次
? ? ? ? strlcpy(spi_device->modalias, "ads1248", sizeof("ads1248") );
? ? ? ? status = spi_add_device(spi_device);
? ? ? ? //spi = spi_new_device( master, &ads124x_master); ?
? ? ? ? if (status < 0)?
? ? ? ? { ? ?
? ? ? ? ? ? spi_dev_put(spi_device);
? ? ? ? ? ? printk(KERN_ALERT "spi_add_device() failed: %d\n", status); ? ? ? ?
? ? ? ? } ? ? ? ? ? ? ? ?
? ? }


? ? put_device(&spi_master->dev);
? ? return status;
}
#if 0
void add_spi_device_master()
{
struct spi_master *master;
struct spi_device *spi;
printk("ads1248_init \n");
status = spi_register_driver(&ads124x_driver);
printk( KERN_INFO "spi : Initiating module" );
if(status < 0)
{
printk( KERN_ALERT " spi driver not register" );
}
master = spi_busnum_to_master(0);
if(!master)
{
printk( KERN_ALERT "spi_busnum_to_master(%d) returned NULL\n", 0 );
? ? ? ? ? ? return -1;
}
spi = spi_new_device( master, &ads124x_master);
if(!spi)
{
put_device( &master->dev );
? ? ? printk( KERN_ALERT "spi_alloc_device() failed\n" );
? ? ? ? ? ? return -1;
}


spi->chip_select = 0;
spi->max_speed_hz = 15000000;
spi->mode = SPI_MODE_0;
? spi->bits_per_word = 8;
spi->irq = -1;
strlcpy( spi->modalias, "ads1248", sizeof("ads1248") );


put_device( &master->dev );


}
#endif
static int __init ads1248_init(void)
{

int status;
spin_lock_init(&ads124x_state.spi_lock);
sema_init(&ads124x_state.fop_sem, 1);

? ? add_spi_device_to_bus();
? ? status = spi_register_driver(&ads124x_driver);
? ??
printk( KERN_INFO "spi : Initiating module" );
if(status < 0)
{
printk( KERN_ALERT " spi driver not register" );
}
? ? return status;
}


static void __exit ads1248_exit(void)
{
? ? printk("ads1248_exit\n");
? ? spi_unregister_driver(&ads124x_driver);
? ? spi_unregister_device(&ads124x_state.spi);
}


module_init(ads1248_init);
module_exit(ads1248_exit);


MODULE_DESCRIPTION("Driver for ads1248");
MODULE_AUTHOR("wxl, Inc");
MODULE_LICENSE("GPL");

總結

以上是生活随笔為你收集整理的linux自带spi驱动 ，可自己配置CS的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。