最近?練習安裝lync2013?在發布拓撲結構時遇到如下錯誤：

?lync 錯誤: 已為不同的傳輸層安全性(TLS)目標找到類型為“McxInternal”且完全限定的域名(FQDN)為“l(fā)ync.contoso.com”的受信任服務器。
在網上找了很久才找到解決方案。

This post is following on from “Lync 2013: Topology Builder encountered an issue and cannot publish this topology” after correcting the issue on my previous blog post I ran into the following issue;

A trusted server with the type “McxInternal” and the fully qualified domain name (FQDN) “EE01.lyncme.local” was found for a different Transport Layer Security (TLS) target

?

The error was also point to

• A trusted server with type “McxExternal”
• A trusted server with type “Microsoft.Rtc.Applications.Testbot”

The resolution for this was to open ADSI Edit and Select Configuration

Browse to CN=Services,CN=RTC Service,CN=Trusted Services and in here you will find the records that specify to McxInternal etc..

I suggest checking the records manually to see what they reference before deleting them. In my case all the records could be deleted as they was referencing to Servers and Pools names of my Lab which is not being used.

After deleting the none require records go back to your “Topology Builder” and “Re-Publish”. It should complete successfully

And In my case the warning was referencing the below error because of using a service account to install Lync 2013

Regards

最近?練習安裝lync2013?在發布拓撲結構時遇到如下錯誤：

?lync 錯誤: 已為不同的傳輸層安全性(TLS)目標找到類型為“McxInternal”且完全限定的域名(FQDN)為“l(fā)ync.contoso.com”的受信任服務器。
在網上找了很久才找到解決方案。

This post is following on from “Lync 2013: Topology Builder encountered an issue and cannot publish this topology” after correcting the issue on my previous blog post I ran into the following issue;

A trusted server with the type “McxInternal” and the fully qualified domain name (FQDN) “EE01.lyncme.local” was found for a different Transport Layer Security (TLS) target

?

The error was also point to

• A trusted server with type “McxExternal”
• A trusted server with type “Microsoft.Rtc.Applications.Testbot”

The resolution for this was to open ADSI Edit and Select Configuration

Browse to CN=Services,CN=RTC Service,CN=Trusted Services and in here you will find the records that specify to McxInternal etc..

I suggest checking the records manually to see what they reference before deleting them. In my case all the records could be deleted as they was referencing to Servers and Pools names of my Lab which is not being used.

After deleting the none require records go back to your “Topology Builder” and “Re-Publish”. It should complete successfully

And In my case the warning was referencing the below error because of using a service account to install Lync 2013

Regards

轉載于:https://www.cnblogs.com/majiang/p/3614573.html

總結

以上是生活随笔為你收集整理的lync2013 错误: 已为不同的传输层安全性(TLS)目标找到类型为“McxInternal”且完全限定的域名(FQDN)为...的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。