/* 神奇的分割線 */

626/*-------------------------------------------------------------------------*/

627

628/* Core methods for SPI master protocol drivers. Some of the

629 * other core methods are currently defined as inline functions.

630 */

631

632/**

633 * spi_setup - setup SPI mode and clock rate

634 * @spi: the device whose settings are being modified

635 * Context: can sleep, and no requests are queued to the device

636 *

637 * SPI protocol drivers may need to update the transfer mode if the

638 * device doesn't work with its default. They may likewise need

639 * to update clock rates or word sizes from initial values. This function

640 * changes those settings, and must be called from a context that can sleep.

641 * Except for SPI_CS_HIGH, which takes effect immediately, the changes take

642 * effect the next time the device is selected and data is transferred to

643 * or from it. When this function returns, the spi device is deselected.

644 *

645 * Note that this call will fail if the protocol driver specifies an option

646 * that the underlying controller or its driver does not support. For

647 * example, not all hardware supports wire transfers using nine bit words,

648 * LSB-first wire encoding, or active-high chipselects.

649 */

650int spi_setup(struct spi_device *spi)

651{

652 unsigned bad_bits;

653 int status;

654

655 /* help drivers fail *cleanly* when they need options

656 * that aren't supported with their current master

657 */

/* 顯示驅動不支持的模式 */

658 bad_bits = spi->mode & ~spi->master->mode_bits;

659 if (bad_bits) {

660 dev_err(&spi->dev, "setup: unsupported mode bits %x\n",

661 bad_bits);

662 return -EINVAL;

663 }

664

/* 設置傳輸位數 */

665 if (!spi->bits_per_word)

666 spi->bits_per_word = 8;

667

/* 調用主機驅動的設置方法設置驅動 */

668 status = spi->master->setup(spi);

669

670 dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s"

671 "%u bits/w, %u Hz max --> %d\n",

672 (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),

673 (spi->mode & SPI_CS_HIGH) ? "cs_high," : "",

674 (spi->mode & SPI_LSB_FIRST) ? "lsb," : "",

675 (spi->mode & SPI_3WIRE) ? "3wire," : "",

676 (spi->mode & SPI_LOOP) ? "loopback," : "",

677 spi->bits_per_word, spi->max_speed_hz,

678 status);

679

680 return status;

681}

682EXPORT_SYMBOL_GPL(spi_setup);

683

684static int __spi_async(struct spi_device *spi, struct spi_message *message)

685{

686 struct spi_master *master = spi->master;

687

688 /* Half-duplex links include original MicroWire, and ones with

689 * only one data pin like SPI_3WIRE (switches direction) or where

690 * either MOSI or MISO is missing. They can also be caused by

691 * software limitations.

692 */

/* 半雙工模式 或者 3線SPI */

693 if ((master->flags & SPI_MASTER_HALF_DUPLEX)

694 || (spi->mode & SPI_3WIRE)) {

/* struct spi_transfer 讀寫緩存 */

695 struct spi_transfer *xfer;

696 unsigned flags = master->flags;

697

/* 遍歷message->transfers鏈表判斷緩存 */

698 list_for_each_entry(xfer, &message->transfers, transfer_list) {

/* 半雙工 */

699 if (xfer->rx_buf && xfer->tx_buf)

700 return -EINVAL;

/* 當前模式?jīng)]有發送，而有發送緩存 */

701 if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf)

702 return -EINVAL;

/* 當前模式?jīng)]有接收，而有接收緩存 */

703 if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf)

704 return -EINVAL;

705 }

706 }

707

/* 該消息使用的設備為SPI */

708 message->spi = spi;

/* 消息正在處理 */

709 message->status = -EINPROGRESS;

/* 調用主機驅動的傳輸方法 */

710 return master->transfer(spi, message);

711}

712

713/**

714 * spi_async - asynchronous SPI transfer

715 * @spi: device with which data will be exchanged

716 * @message: describes the data transfers, including completion callback

717 * Context: any (irqs may be blocked, etc)

718 *

719 * This call may be used in_irq and other contexts which can't sleep,

720 * as well as from task contexts which can sleep.

721 *

722 * The completion callback is invoked in a context which can't sleep.

723 * Before that invocation, the value of message->status is undefined.

724 * When the callback is issued, message->status holds either zero (to

725 * indicate complete success) or a negative error code. After that

726 * callback returns, the driver which issued the transfer request may

727 * deallocate the associated memory; it's no longer in use by any SPI

728 * core or controller driver code.

729 *

730 * Note that although all messages to a spi_device are handled in

731 * FIFO order, messages may go to different devices in other orders.

732 * Some device might be higher priority, or have various "hard" access

733 * time requirements, for example.

734 *

735 * On detection of any fault during the transfer, processing of

736 * the entire message is aborted, and the device is deselected.

737 * Until returning from the associated message completion callback,

738 * no other spi_message queued to that device will be processed.

739 * (This rule applies equally to all the synchronous transfer calls,

740 * which are wrappers around this core asynchronous primitive.)

741 */

742int spi_async(struct spi_device *spi, struct spi_message *message)

743{

744 struct spi_master *master = spi->master;

745 int ret;

746 unsigned long flags;

747

/* 禁止終端，同時請求持有自旋鎖 */

748 spin_lock_irqsave(&master->bus_lock_spinlock, flags);

749

750 if (master->bus_lock_flag)

751 ret = -EBUSY;

752 else

/* 異步傳輸消息 */

753 ret = __spi_async(spi, message);

754

/* 恢復終端，解鎖自旋鎖 */

755 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);

756

757 return ret;

758}

759EXPORT_SYMBOL_GPL(spi_async);

760

761/**

762 * spi_async_locked - version of spi_async with exclusive bus usage

763 * @spi: device with which data will be exchanged

764 * @message: describes the data transfers, including completion callback

765 * Context: any (irqs may be blocked, etc)

766 *

767 * This call may be used in_irq and other contexts which can't sleep,

768 * as well as from task contexts which can sleep.

769 *

770 * The completion callback is invoked in a context which can't sleep.

771 * Before that invocation, the value of message->status is undefined.

772 * When the callback is issued, message->status holds either zero (to

773 * indicate complete success) or a negative error code. After that

774 * callback returns, the driver which issued the transfer request may

775 * deallocate the associated memory; it's no longer in use by any SPI

776 * core or controller driver code.

777 *

778 * Note that although all messages to a spi_device are handled in

779 * FIFO order, messages may go to different devices in other orders.

780 * Some device might be higher priority, or have various "hard" access

781 * time requirements, for example.

782 *

783 * On detection of any fault during the transfer, processing of

784 * the entire message is aborted, and the device is deselected.

785 * Until returning from the associated message completion callback,

786 * no other spi_message queued to that device will be processed.

787 * (This rule applies equally to all the synchronous transfer calls,

788 * which are wrappers around this core asynchronous primitive.)

789 */

/* 另一個版本的spi_async，不包括使用總線 */

790int spi_async_locked(struct spi_device *spi, struct spi_message *message)

791{

792 struct spi_master *master = spi->master;

793 int ret;

794 unsigned long flags;

795

796 spin_lock_irqsave(&master->bus_lock_spinlock, flags);

797

798 ret = __spi_async(spi, message);

799

800 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);

801

802 return ret;

803

804}

805EXPORT_SYMBOL_GPL(spi_async_locked);

806

807

808/*-------------------------------------------------------------------------*/

總結

以上是生活随笔為你收集整理的linux spi驱动分析 三,Linux下SPI驱动分析的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。