1 tshark -h
  2 TShark (Wireshark) 2.4.1 (v2.4.1-0-gf42a0d2b6c)
  3 Dump and analyze network traffic.
  4 See https://www.wireshark.org for more information.
  5 
  6 Usage: tshark [options] ...
  7 
  8 Capture interface:
  9   -i <interface>           name or idx of interface (def: first non-loopback)
 10   -f <capture filter>      packet filter in libpcap filter syntax
 11   
 12   -s <snaplen>             packet snapshot length (def: appropriate maximum)
 13   -p                       don't capture in promiscuous mode
 14   -I                       capture in monitor mode, if available
 15   -B <buffer size>         size of kernel buffer (def: 2MB)
 16   -y <link type>           link layer type (def: first appropriate)
 17   -D                       print list of interfaces and exit
 18   -L                       print list of link-layer types of iface and exit
 19 
 20 Capture stop conditions:
 21   -c <packet count>        stop after n packets (def: infinite)
 22   -a <autostop cond.> ...  duration:NUM - stop after NUM seconds
 23                            filesize:NUM - stop this file after NUM KB
 24                               files:NUM - stop after NUM files
 25 Capture output:
 26   -b <ringbuffer opt.> ... duration:NUM - switch to next file after NUM secs
 27                            filesize:NUM - switch to next file after NUM KB
 28                               files:NUM - ringbuffer: replace after NUM files
 29 RPCAP options:
 30   -A <user>:<password>     use RPCAP password authentication
 31  
 32 Input file:
 33   -r <infile>              set the filename to read from (- to read from stdin)
 34 
 35 Processing:
 36   -2                       perform a two-pass analysis
 37   -M <packet count>        perform session auto reset
 38   -R <read filter>         packet Read filter in Wireshark display filter syntax
 39 
 40                            (requires -2)
 41   -Y <display filter>      packet displaY filter in Wireshark display filter
 42                            syntax
 43   -n                       disable all name resolutions (def: all enabled)
 44   -N <name resolve flags>  enable specific name resolution(s): "mnNtCd"
 45   -d <layer_type>==<selector>,<decode_as_protocol> ...
 46                            "Decode As", see the man page for details
 47                            Example: tcp.port==8888,http
 48   -H <hosts file>          read a list of entries from a hosts file, which will
 49                            then be written to a capture file. (Implies -W n)
 50   --enable-protocol <proto_name>
 51                            enable dissection of proto_name
 52   --disable-protocol <proto_name>
 53                            disable dissection of proto_name
 54   --enable-heuristic <short_name>
 55                            enable dissection of heuristic protocol
 56   --disable-heuristic <short_name>
 57                            disable dissection of heuristic protocol
 58 Output:
 59   -w <outfile|->           write packets to a pcap-format file named "outfile"
 60                            (or to the standard output for "-")
 61   -C <config profile>      start with specified configuration profile
 62   -F <output file type>    set the output file type, default is pcapng
 63                            an empty "-F" option will list the file types
 64   -V                       add output of packet tree        (Packet Details)
 65   -O <protocols>           Only show packet details of these protocols, comma
 66                            separated
 67   -P                       print packet summary even when writing to a file
 68   -S <separator>           the line separator to print between packets
 69   -x                       add output of hex and ASCII dump (Packet Bytes)
 70   -T pdml|ps|psml|json|jsonraw|ek|tabs|text|fields|?
 71                            format of text output (def: text)
 72   -j <protocolfilter>      protocols layers filter if -T ek|pdml|json selected
 73                            (e.g. "ip ip.flags text", filter does not expand chil
 74 d
 75                            nodes, unless child is specified also in the filter)
 76   -J <protocolfilter>      top level protocol filter if -T ek|pdml|json selected
 77 
 78                            (e.g. "http tcp", filter which expands all child node
 79 s)
 80   -e <field>               field to print if -Tfields selected (e.g. tcp.port,
 81                            _ws.col.Info)
 82                            this option can be repeated to print multiple fields
 83   -E<fieldsoption>=<value> set options for output when -Tfields selected:
 84      bom=y|n               print a UTF-8 BOM
 85      header=y|n            switch headers on and off
 86      separator=/t|/s|<char> select tab, space, printable character as separator
 87      occurrence=f|l|a      print first, last or all occurrences of each field
 88      aggregator=,|/s|<char> select comma, space, printable character as
 89                            aggregator
 90      quote=d|s|n           select double, single, no quotes for values
 91   -t a|ad|d|dd|e|r|u|ud|?  output format of time stamps (def: r: rel. to first)
 92   -u s|hms                 output format of seconds (def: s: seconds)
 93   -l                       flush standard output after each packet
 94   -q                       be more quiet on stdout (e.g. when using statistics)
 95   -Q                       only log true errors to stderr (quieter than -q)
 96   -g                       enable group read access on the output file(s)
 97   -W n                     Save extra information in the file, if supported.
 98                            n = write network address resolution information
 99   -X <key>:<value>         eXtension options, see the man page for details
100   -U tap_name              PDUs export mode, see the man page for details
101   -z <statistics>          various statistics, see the man page for details
102   --capture-comment <comment>
103                            add a capture comment to the newly created
104                            output file (only for pcapng)
105   --export-objects <protocol>,<destdir> save exported objects for a protocol to
106                            a directory named "destdir"
107 
108 Miscellaneous:
109   -h                       display this help and exit
110   -v                       display version info and exit
111   -o <name>:<value> ...    override preference setting
112   -K <keytab>              keytab file to use for kerberos decryption
113   -G [report]              dump one of several available reports and exit
114                            default report="fields"
115                            use "-G ?" for more help                   
116

---

                           
117 tshark.exe -F
118 tshark.exe: option requires an argument -- 'F'
119 tshark: The available capture file types for the "-F" flag are:
120     5views - InfoVista 5View capture
121     btsnoop - Symbian OS btsnoop
122     commview - TamoSoft CommView
123     dct2000 - Catapult DCT2000 trace (.out format)
124     erf - Endace ERF capture
125     eyesdn - EyeSDN USB S0/E1 ISDN trace format
126     k12text - K12 text file
127     lanalyzer - Novell LANalyzer
128     logcat - Android Logcat Binary format
129     logcat-brief - Android Logcat Brief text format
130     logcat-long - Android Logcat Long text format
131     logcat-process - Android Logcat Process text format
132     logcat-tag - Android Logcat Tag text format
133     logcat-thread - Android Logcat Thread text format
134     logcat-threadtime - Android Logcat Threadtime text format
135     logcat-time - Android Logcat Time text format
136     modpcap - Modified tcpdump - pcap
137     netmon1 - Microsoft NetMon 1.x
138     netmon2 - Microsoft NetMon 2.x
139     nettl - HP-UX nettl trace
140     ngsniffer - Sniffer (DOS)
141     ngwsniffer_1_1 - NetXray, Sniffer (Windows) 1.1
142     ngwsniffer_2_0 - Sniffer (Windows) 2.00x
143     niobserver - Network Instruments Observer
144     nokiapcap - Nokia tcpdump - pcap
145     nsecpcap - Wireshark/tcpdump/... - nanosecond pcap
146     nstrace10 - NetScaler Trace (Version 1.0)
147     nstrace20 - NetScaler Trace (Version 2.0)
148     nstrace30 - NetScaler Trace (Version 3.0)
149     nstrace35 - NetScaler Trace (Version 3.5)
150     pcap - Wireshark/tcpdump/... - pcap
151     pcapng - Wireshark/... - pcapng
152     rf5 - Tektronix K12xx 32-bit .rf5 format
153     rh6_1pcap - RedHat 6.1 tcpdump - pcap
154     snoop - Sun snoop
155     suse6_3pcap - SuSE 6.3 tcpdump - pcap
156     visual - Visual Networks traffic capture
157

---

158 tshark -i4 -c 100 -f "tcp" -F pcap -w c:	est.pcap
159 tshark -i4 -a duration:60 -f "tcp" -F pcap -w e:	est.pcap

總結

以上是生活随笔為你收集整理的tshark使用说明的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。