/** ttt.cpp** Created on: 2012-12-5* Author: xy*/#include <stdlib.h> #include <stdio.h> #include <string.h>/*part one，14 bit*/ #pragma pack(2) //以2個字節對齊 struct head {short int bfType; //位圖類型long int bfsize; //位圖文件大小short int freserved1; //必須為0short int freserved2; //必須為0long int bfoffbits; //第54個開始 } head;/*part,two, 40 bit*/ struct info {long int bisize; //本結構站用的字節數 40long biwidth; //位圖的寬度long biheight; //位圖的高度short int biplanes; //目標設備的級別short int BIBITCOUNT; //每個象素所需的位數long int bigcompression; //位圖壓縮類型long int bisizeimage; //位圖的大小long bixpelspermeter;long biypelspermeter;long int biclrused;long int biclrimportant; } info; #pragma pack() void init_bmp(unsigned int bmp_width,unsigned int bmp_height) {info.bisize = 0x28 ;// 本結構的大小40個字節info.biwidth = bmp_width; //位圖寬info.biheight= bmp_height; //位圖高　要修改info.biplanes = 0;info.BIBITCOUNT = 32 ;// 位圖的色深　32是要字節對齊info.bigcompression = 0 ;// 表示不壓縮info.bixpelspermeter = bmp_width*bmp_height*4; //位圖數據info.bixpelspermeter=0;info.biypelspermeter=0;info.biclrused = 0;info.biclrimportant = 0;head.bfType=0x4d42;//ASICC bmhead.bfsize = bmp_width*bmp_height*4+56; //位圖數據　＋　數據頭head.freserved1=0;head.freserved2=0;head.bfoffbits=0x36;//54} /****************************************************** 功能：讀字庫* 參數：character 傳入字符 character_size　字符gb2312碼的個數　　buf 傳出字符在字庫中的值　　buf_size　buf的字節數* 補充：character傳入的字符一定要是gb2312,一定不能是utf-8的。* **************************************************/ int read_data_from_hzk(unsigned char *buf,unsigned int buf_size, char *character,unsigned int character_size) {unsigned char qh,wh;//區　位int ret;unsigned long offset;//字庫中偏移unsigned int i;FILE *HZK;if(strlen(character)/2!=character_size||buf_size/32!=character_size)//檢查是不是gb2312的碼{printf("the character is wrong 2 \n");return -1;}for(i=0;i<character_size; i++){unsigned char *p=(unsigned char *)(character+i*2); //兩個字節，也就是一個字符偏移一下if(*p<0xa0||*(p+1)<0xa0) //檢查是不是gb2312的碼{printf("the character is wrong 1 \n");return -1;}qh=p[0]- 0xa0;;wh=p[1]- 0xa0;;offset = (94*(qh-1)+(wh-1))*32;if((HZK=fopen("HZK16","r"))==NULL){printf("Can't Open hzk16\n");return -1;}ret=fseek(HZK,offset,SEEK_SET);if(ret<0){printf("error in fseek\n");return -1;}ret=fread( buf+i*32,32,1,HZK); //讀的時候，每個16*16字符點32個字節if(ret!=1){printf("error in fread,the size is %d\n",ret);return -1;}}fclose(HZK);return 0; }/******************************************************** 功能：在位圖中寫字，就是把庫中讀的內容寫到位圖中* 參數：character_buf 從字庫中讀出的字符存在的位置　　character_buf_size 字符占用的空間　p 位圖數據　　p_size位圖數據占用的空間* bmp_width 位圖的寬 bmp_height位圖的高*******************************************************/ void write_BMP(unsigned char *character_buf,unsigned int character_buf_size ,unsigned char *p,\unsigned int p_size,unsigned int bmp_width,unsigned int bmp_height) {//fseek(fp,54,SEEK_SET);//把文件頭偏移過去 printf("characters_buf_size:%d\n",character_buf_size);unsigned int i,j,k,size;unsigned char *cbuf;for(size=0;size<character_buf_size/32; size++){cbuf=character_buf+size*32; //一個字符戰用32個字節for(j=0;j<16;j++){for(i=0;i<2;i++){for(k=0;k<8;k++){if(((cbuf[j*2+i]>>(7-k))&0x1)!=0){printf("x");//*(int *)(p+(200*(2+j)+i*8+k)*4)=0xff000000;//顯示在左，左右反的，坐標系統理解不正確//*(int *)(p+200*18*4-(200*(2+j)+i*8+k)*4)=0xff000000;//顯示在右邊，左右反的，坐標系統理解不正確*(int *)(p+bmp_width*(16+ (bmp_height-16)/2-1 )*4-j*bmp_width*4+i*8*4+k*4+(16*size)*4)=0xff00FF00;//(bmp_height-16)/2-1是想放在bmp的中間位置//指針是unsigned char ，要這樣寫，這個就可以用了, 第一個字size是0第二個字size是１ 16是字庫的邊長 200是bmp的長}else{//*(p+(200*(2+j)+i*8+j)*4)=128;printf(" ");}}}printf("\n");}printf("\nsize:%d\n",size);} }int main() {unsigned int bmp_width,bmp_height; //自定義的位圖的寬和高bmp_width = 320;bmp_height=200;init_bmp(bmp_width,bmp_height);FILE *fp = fopen("11.bmp","w");fwrite(&head, 1, sizeof(struct head),fp);fwrite(&info, 1, sizeof(struct info),fp);unsigned char *p= (unsigned char *)malloc(bmp_width*bmp_height*4); //分配一個bmp數據的內存memset(p, 0xff, bmp_width*bmp_height*4); //做成白底的unsigned char *buf;//存放從字庫中讀出來的內容char character[]="２０１２－１２－５　１２：４０：２９";unsigned int character_size=strlen(character)/2;//字庫是gb2312的，一個字占兩個字節printf("character size:%d\n",character_size);unsigned buf_size=character_size*32;buf=(unsigned char *)malloc(buf_size); //一個16*16的點陣占用32個字節if(read_data_from_hzk(buf , buf_size, character,character_size)<0){printf("read error\n");exit(1);}write_BMP(buf,buf_size,p,1,bmp_width,bmp_height);fwrite(p, bmp_width*bmp_height*4,1, fp);fclose(fp);return 0; }

總結

以上是生活随笔為你收集整理的制做任意大小的bmp，并在其中写汉字的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。