主機自帶硬盤超過300GB，目前只劃分使用了3個主分區，不到70GB，如 下：

[root@db2 ~]# df -h

Filesystem Size Used Avail Use% Mounted on

/dev/sda1 29G 3.7G? 24G 14% /

/dev/sda2 29G? 22G 5.2G 81% /oracle

tmpfs??? 2.0G??? 0 2.0G? 0% /dev/shm

[root@db2 ~]# cat /proc/partitions

major minor? #blocks? name

8???? 0? 311427072 sda

sda1

8???? 2?? 30716280 sda2

8???? 3??? 8193150 sda3

8??? 16???? 976896 sdb

8??? 32???? 976896 sdc

現在需要給系統添加1個100GB的空間存放數據文件，而又不影響現有系統上業務的運行，

使用fdisk結合partprobe命令不重啟系統添加 一塊新的磁盤分區。操作步驟如下：

第1步，添加新的磁盤分區

[root@db2 ~]# fdisk /dev/sda

The number of cylinders for this disk is set to 38770.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/sda: 318.9 GB, 318901321728 bytes

255 heads, 63 sectors/track, 38770 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot????? Start???????? End????? Blocks?? Id? System

/dev/sda1?? *?????????? 1??????? 3824??? 30716248+? 83? Linux

/dev/sda2??????????? 3825??????? 7648??? 30716280?? 83? Linux

/dev/sda3??????????? 7649??????? 8668???? 8193150?? 82? Linux swap / Solaris

Command (m for help): n

Command action

e?? extended

p?? primary partition (1-4)

p

Selected partition 4

First cylinder (8669-38770, default 8669):

Using default value 8669

Last cylinder or +size or +sizeM or +sizeK (8669-38770, default 38770): +100G

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16:

Device or resource busy.

The kernel still uses the old table.

The new table will be used at the next reboot.

Syncing disks.

[root@db2 ~]#

第2步，使用工具partprobe讓kernel讀取分區信息

[root@db2 ~]# partprobe

使用fdisk工具只是將分區信息寫到磁盤，如果需要mkfs磁盤分區則需要重啟系統，

而使用partprobe則可以使kernel重新讀取分區 信息，從而避免重啟系統。

第3步，格式化文件系統

[root@db2 ~]# mkfs.ext3 /dev/sda4

mke2fs 1.39 (29-May-2006)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

12222464 inodes, 24416791 blocks

1220839 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=4294967296

746 block groups

32768 blocks per group, 32768 fragments per group

16384 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632,

2654208, 4096000, 7962624, 11239424, 20480000, 23887872

Writing inode tables: done

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information:

done

This filesystem will be automatically checked every 26 mounts or

180 days, whichever comes first.? Use tune2fs -c or -i to override.

[root@db2 ~]#

第4步，mount新的分區/dev/sda4

[root@db2 ~]# e2label? /dev/sda4 /data

[root@db2 ~]# mkdir /data

[root@db2 ~]# mount /dev/sda4 /data

[root@db2 ~]# df

Filesystem?????????? 1K-blocks????? Used Available Use% Mounted on

/dev/sda1???????????? 29753556?? 3810844? 24406900? 14% /

/dev/sda2???????????? 29753588? 11304616? 16913160? 41% /oracle

tmpfs????????????????? 2023936???????? 0?? 2023936?? 0% /dev/shm

/dev/sda4???????????? 96132968??? 192312? 91057300?? 1% /data

[root@db2 ~]#

總結：使用partprobe可以不用重啟系統即可配合fdisk工具創建新的分區。

總結

以上是生活随笔為你收集整理的linux 新分区使用1%,linux下使用fdisk结合partprobe命令不重启系统添加一块新的磁盘分区...的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。