Nmap，也就是Network Mapper，最早是Linux下的網絡掃描和工具包。nmap是一個網絡連接端掃描軟件，用來掃描網上電腦開放的網絡連接端。確定哪些服務運行在哪些連接端，并且推斷計算機運行哪個操作系統（這是亦稱 fingerprinting）。它是網絡管理員必用的軟件之一，以及用以評估網絡系統安全。

可以是探測一組主機是否在線；其次是掃描主機端口，所提供的網絡服務；還可以推斷主機所用的操作系統 。

官方中文文檔地址：http://www.nmap.com.cn/

Nmap使用其實特別簡單，只需咋需要下輸入nmap +目標地址就可以執行掃描任務，

nmap -參數 ip

sn 探測掃描主機， 不進行端口掃描

sT是TCP掃描，但是很容易被檢測到，所以目標主機會記下來你的ip喲

sS是SYN掃描，很隱蔽。

sU 是UDP掃描

5、 sV #系統版本檢測

6、 O #操作系統識別

下面是完整的nmap的help

Nmap 7.80 ( https://nmap.org ) Usage: nmap [Scan Type(s)] [Options] {target specification} TARGET SPECIFICATION:Can pass hostnames, IP addresses, networks, etc.Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254-iL <inputfilename>: Input from list of hosts/networks-iR <num hosts>: Choose random targets--exclude <host1[,host2][,host3],...>: Exclude hosts/networks--excludefile <exclude_file>: Exclude list from file HOST DISCOVERY:-sL: List Scan - simply list targets to scan-sn: Ping Scan - disable port scan-Pn: Treat all hosts as online -- skip host discovery-PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports-PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes-PO[protocol list]: IP Protocol Ping-n/-R: Never do DNS resolution/Always resolve [default: sometimes]--dns-servers <serv1[,serv2],...>: Specify custom DNS servers--system-dns: Use OS's DNS resolver--traceroute: Trace hop path to each host SCAN TECHNIQUES:-sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans-sU: UDP Scan-sN/sF/sX: TCP Null, FIN, and Xmas scans--scanflags <flags>: Customize TCP scan flags-sI <zombie host[:probeport]>: Idle scan-sY/sZ: SCTP INIT/COOKIE-ECHO scans-sO: IP protocol scan-b <FTP relay host>: FTP bounce scan PORT SPECIFICATION AND SCAN ORDER:-p <port ranges>: Only scan specified portsEx: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080,S:9--exclude-ports <port ranges>: Exclude the specified ports from scanning-F: Fast mode - Scan fewer ports than the default scan-r: Scan ports consecutively - don't randomize--top-ports <number>: Scan <number> most common ports--port-ratio <ratio>: Scan ports more common than <ratio> SERVICE/VERSION DETECTION:-sV: Probe open ports to determine service/version info--version-intensity <level>: Set from 0 (light) to 9 (try all probes)--version-light: Limit to most likely probes (intensity 2)--version-all: Try every single probe (intensity 9)--version-trace: Show detailed version scan activity (for debugging) SCRIPT SCAN:-sC: equivalent to --script=default--script=<Lua scripts>: <Lua scripts> is a comma separated list ofdirectories, script-files or script-categories--script-args=<n1=v1,[n2=v2,...]>: provide arguments to scripts--script-args-file=filename: provide NSE script args in a file--script-trace: Show all data sent and received--script-updatedb: Update the script database.--script-help=<Lua scripts>: Show help about scripts.<Lua scripts> is a comma-separated list of script-files orscript-categories. OS DETECTION:-O: Enable OS detection--osscan-limit: Limit OS detection to promising targets--osscan-guess: Guess OS more aggressively TIMING AND PERFORMANCE:Options which take <time> are in seconds, or append 'ms' (milliseconds),'s' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m).-T<0-5>: Set timing template (higher is faster)--min-hostgroup/max-hostgroup <size>: Parallel host scan group sizes--min-parallelism/max-parallelism <numprobes>: Probe parallelization--min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout <time>: Specifiesprobe round trip time.--max-retries <tries>: Caps number of port scan probe retransmissions.--host-timeout <time>: Give up on target after this long--scan-delay/--max-scan-delay <time>: Adjust delay between probes--min-rate <number>: Send packets no slower than <number> per second--max-rate <number>: Send packets no faster than <number> per second FIREWALL/IDS EVASION AND SPOOFING:-f; --mtu <val>: fragment packets (optionally w/given MTU)-D <decoy1,decoy2[,ME],...>: Cloak a scan with decoys-S <IP_Address>: Spoof source address-e <iface>: Use specified interface-g/--source-port <portnum>: Use given port number--proxies <url1,[url2],...>: Relay connections through HTTP/SOCKS4 proxies--data <hex string>: Append a custom payload to sent packets--data-string <string>: Append a custom ASCII string to sent packets--data-length <num>: Append random data to sent packets--ip-options <options>: Send packets with specified ip options--ttl <val>: Set IP time-to-live field--spoof-mac <mac address/prefix/vendor name>: Spoof your MAC address--badsum: Send packets with a bogus TCP/UDP/SCTP checksum OUTPUT:-oN/-oX/-oS/-oG <file>: Output scan in normal, XML, s|<rIpt kIddi3,and Grepable format, respectively, to the given filename.-oA <basename>: Output in the three major formats at once-v: Increase verbosity level (use -vv or more for greater effect)-d: Increase debugging level (use -dd or more for greater effect)--reason: Display the reason a port is in a particular state--open: Only show open (or possibly open) ports--packet-trace: Show all packets sent and received--iflist: Print host interfaces and routes (for debugging)--append-output: Append to rather than clobber specified output files--resume <filename>: Resume an aborted scan--stylesheet <path/URL>: XSL stylesheet to transform XML output to HTML--webxml: Reference stylesheet from Nmap.Org for more portable XML--no-stylesheet: Prevent associating of XSL stylesheet w/XML output MISC:-6: Enable IPv6 scanning-A: Enable OS detection, version detection, script scanning, and traceroute--datadir <dirname>: Specify custom Nmap data file location--send-eth/--send-ip: Send using raw ethernet frames or IP packets--privileged: Assume that the user is fully privileged--unprivileged: Assume the user lacks raw socket privileges-V: Print version number-h: Print this help summary page. EXAMPLES:nmap -v -A scanme.nmap.orgnmap -v -sn 192.168.0.0/16 10.0.0.0/8nmap -v -iR 10000 -Pn -p 80 SEE THE MAN PAGE (https://nmap.org/book/man.html) FOR MORE OPTIONS AND EXAMPLES

總結

以上是生活随笔為你收集整理的kali - Nmap的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。