IDM 下载器 汉化注册激活
生活随笔
收集整理的這篇文章主要介紹了
IDM 下载器 汉化注册激活
小編覺得挺不錯的,現在分享給大家,幫大家做個參考.
將以下程序更改為.bat文件、使用windows的管理員權限打開。
漢化于：https://github.com/WindowsAddict/IDM-Activation-Script
@setlocal DisableDelayedExpansion
@echo off
::============================================================================
::
:: IDM Activation Script (IAS)
::
:: Homepages: https://github.com/WindowsAddict/IDM-Activation-Script
:: https://massgrave.dev/idm-activation-script
::
:: Email: windowsaddict@protonmail.com
::
::============================================================================
:: Add custom name in IDM license info, prefer to write it in English and/or numeric in below line after = sign,
set name=
: Parameters_info
:: For activation in unattended mode, run the script with /act parameter.
:: For reset in unattended mode, run the script with /res parameter.
:: To enable silent mode with above two methods, run the script with /s parameter.
::========================================================================================================================================
:: Re-launch the script with x64 process if it was initiated by x86 process on x64 bit Windows
:: or with ARM64 process if it was initiated by x86/ARM32 process on ARM64 Windows
set "_cmdf=%~f0"
for %%# in (%*) do (
if /i "%%#"=="r1" set r1=1
if /i "%%#"=="r2" set r2=1
)
if exist %SystemRoot%\Sysnative\cmd.exe if not defined r1 (
setlocal EnableDelayedExpansion
start %SystemRoot%\Sysnative\cmd.exe /c ""!_cmdf!" %* r1"
exit /b
)
:: Re-launch the script with ARM32 process if it was initiated by x64 process on ARM64 Windows
if exist %SystemRoot%\SysArm32\cmd.exe if %PROCESSOR_ARCHITECTURE%==AMD64 if not defined r2 (
setlocal EnableDelayedExpansion
start %SystemRoot%\SysArm32\cmd.exe /c ""!_cmdf!" %* r2"
exit /b
)
:: Set Path variable, it helps if it is misconfigured in the system
set "PATH=%SystemRoot%\System32;%SystemRoot%\System32\wbem;%SystemRoot%\System32\WindowsPowerShell\v1.0\"
if exist "%SystemRoot%\Sysnative\reg.exe" (
set "PATH=%SystemRoot%\Sysnative;%SystemRoot%\Sysnative\wbem;%SystemRoot%\Sysnative\WindowsPowerShell\v1.0\;%PATH%"
)
:: Check LF line ending
pushd "%~dp0"
>nul findstr /rxc:".*" "%~nx0"
if not %errorlevel%==0 (
echo:
echo 錯誤：腳本LF行結尾有問題，或者讀取失敗。
echo:
ping 127.0.0.1 -n 6 > nul
popd
exit /b
)
popd
::========================================================================================================================================
cls
color 07
set _args=
set _elev=
set reset=
set Silent=
set activate=
set _args=%*
if defined _args set _args=%_args:"=%
if defined _args (
for %%A in (%_args%) do (
if /i "%%A"=="-el" set _elev=1
if /i "%%A"=="/res" set Unattended=1&設置激活=&設置重置=1
if /i "%%A"=="/act" set Unattended=1&設置激活=1&設置重置=
if /i "%%A"=="/s" set Unattended=1&設置靜音=1
)
)
::========================================================================================================================================
set winbuild=1
set "nul=>nul 2>&1"
set "_psc=%SystemRoot%\System32\WindowsPowerShell\v1.0\powershell.exe"
for /f "tokens=6 delims=[]. " %%G in ('ver') do set winbuild=%%G
set _NCS=1
if %winbuild% LSS 10586 set _NCS=0
if %winbuild% GEQ 10586 reg query "HKCU\Console" /v ForceV2 2>nul | find /i "0x0" 1>nul && (set _NCS=0)
call :_colorprep
set "nceline=echo: &echo ==== 錯誤 ==== &echo:"
set "line=________________________________________________________________________________________"
set "_buf={$W=$Host.UI.RawUI.WindowSize;$B=$Host.UI.RawUI.BufferSize;$W.Height=31;$B.Height=300;$Host.UI.RawUI.WindowSize=$W;$Host.UI.RawUI.BufferSize=$B;}"
if defined Silent if not defined activate if not defined reset exit /b
if defined Silent call :begin %nul% & exit /b
:begin
::========================================================================================================================================
if not exist "%_psc%" (
%nceline%
echo 系統中未安裝 Windows PowerShell。
echo 正在中止...
goto done2
)
if %winbuild% LSS 7600 (
%nceline%
echo 檢測到不支持的操作系統版本。
echo 項目?jī)H支持 Windows 7/8/8.1/10/11及其服務器等系統版本。
goto done2
)
::========================================================================================================================================
:: Fix for the special characters limitation in path name
:: Thanks to @abbodi1406
set "_work=%~dp0"
if "%_work:~-1%"=="\" set "_work=%_work:~0,-1%"
set "_batf=%~f0"
set "_batp=%_batf:'=''%"
set _PSarg="""%~f0""" -el %_args%
set "_appdata=%appdata%"
for /f "tokens=2*" %%a in ('reg query "HKCU\Software\DownloadManager" /v ExePath 2^>nul') do call set "IDMan=%%b"
setlocal EnableDelayedExpansion
::========================================================================================================================================
:: Elevate script as admin and pass arguments and preventing loop
>nul fltmc || (
if not defined _elev %_psc% "start cmd.exe -arg '/c \"!_PSarg:'=''!\"' -verb runas" && exit /b
%nceline%
echo 此腳本需要管理員權限。
echo 為此，請右鍵單擊該腳本并選擇 "以管理員身份運行"。
goto done2
)
::========================================================================================================================================
:: Below code also works for ARM64 Windows 10 (including x64 bit emulation)
reg query "HKLM\Hardware\Description\System\CentralProcessor\0" /v "Identifier" | find /i "x86" 1>nul && set arch=x86|| set arch=x64
if not exist "!IDMan!" (
if %arch%==x64 set "IDMan=%ProgramFiles(x86)%\Internet Download Manager\IDMan.exe"
if %arch%==x86 set "IDMan=%ProgramFiles%\Internet Download Manager\IDMan.exe"
)
if "%arch%"=="x86" (
set "CLSID=HKCU\Software\Classes\CLSID"
set "HKLM=HKLM\Software\Internet Download Manager"
set "_tok=5"
) else (
set "CLSID=HKCU\Software\Classes\Wow6432Node\CLSID"
set "HKLM=HKLM\SOFTWARE\Wow6432Node\Internet Download Manager"
set "_tok=6"
)
set _temp=%SystemRoot%\Temp
set regdata=%SystemRoot%\Temp\regdata.txt
set "idmcheck=tasklist /fi "imagename eq idman.exe" | findstr /i "idman.exe" >nul"
::========================================================================================================================================
if defined Unattended (
if defined reset goto _reset
if defined activate goto _activate
)
:MainMenu
cls
title IDM 激活腳本 0.8
mode 75, 30
:: Check firewall status
set /a _ena=0
set /a _dis=0
for %%# in (DomainProfile PublicProfile StandardProfile) do (
for /f "skip=2 tokens=2*" %%a in ('reg query HKLM\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\%%# /v EnableFirewall 2^>nul') do (
if /i %%b equ 0x1 (set /a _ena+=1) else (set /a _dis+=1)
)
)
if %_ena%==3 (
set _status=啟用
set _col=%_Green%
)
if %_dis%==3 (
set _status=Disabled
set _col=%_Red%
)
if not %_ena%==3 if not %_dis%==3 (
set _status=Status_Unclear
set _col=%_Yellow%
)
echo:
echo:
echo:
echo:
echo:
echo:
echo: ___________________________________________________
echo:
echo: [1] 激活 IDM
echo: [2] 重置 IDM 激活 / 注冊試用
echo: _____________________________________________
echo:
call :_color2 %_White% " [3] 切換 Windows 防火墻 " %_col% "[%_status%]"
echo: _____________________________________________
echo:
echo: [4] 自述文件
echo: [5] 下載IDM
echo: _____________________________________________
echo:
echo: [6] 退出
echo: ___________________________________________________
echo:
call :_color2 %_White% " " %_Green% "在鍵盤中輸入菜單選項 [1,2,3,4,5,6]"
choice /C:1234567 /N
set _erl=%errorlevel%
if %_erl%==6 exit /b
if %_erl%==5 start https://www.internetdownloadmanager.com & goto MainMenu
if %_erl%==4 start https://github.com/WindowsAddict/IDM-Activation-Script & start https://massgrave.dev/idm-activation-script & goto MainMenu
if %_erl%==3 call :_tog_Firewall&goto MainMenu
if %_erl%==2 goto _reset
if %_erl%==1 goto _activate
goto :MainMenu
::========================================================================================================================================
:_tog_Firewall
if %_status%==啟用 (
netsh AdvFirewall Set AllProfiles State Off >nul
) else (
netsh AdvFirewall Set AllProfiles State On >nul
)
exit /b
::========================================================================================================================================
:_reset
if not defined Unattended (
mode 93, 32
%nul% %_psc% "&%_buf%"
)
echo:
set _error=
reg query "HKCU\Software\DownloadManager" "/v" "Serial" %nul% && (
%idmcheck% && taskkill /f /im idman.exe
)
if exist "!_appdata!\DMCache\settings.bak" del /s /f /q "!_appdata!\DMCache\settings.bak"
set "_action=call :delete_key"
call :reset
echo:
echo %line%
echo:
if not defined _error (
call :_color %Green% "IDM 激活 - 已成功在注冊表中重置試用。"
) else (
call :_color %Red% "未能完全重置 IDM 激活 - 試用版。"
)
goto done
::========================================================================================================================================
:_activate
if not defined Unattended (
mode 93, 32
%nul% %_psc% "&%_buf%"
)
echo:
set _error=
if not exist "!IDMan!" (
call :_color %Red% "IDM [Internet Download Manager] 未安裝。"
echo 你可以從以下網址下載 https://www.internetdownloadmanager.com/download.html
goto done
)
:: Internet check with internetdownloadmanager.com ping and port 80 test
ping -n 1 internetdownloadmanager.com >nul || (
%_psc% "$t = New-Object Net.Sockets.TcpClient;try{$t.Connect("""internetdownloadmanager.com""", 80)}catch{};$t.Connected" | findstr /i true 1>nul
)
if not [%errorlevel%]==[0] (
call :_color %Red% "無法連接 internetdownloadmanager.com, 正在中止..."
goto done
)
echo 互聯網已連接。
%idmcheck% && taskkill /f /im idman.exe
if exist "!_appdata!\DMCache\settings.bak" del /s /f /q "!_appdata!\DMCache\settings.bak"
set "_action=call :delete_key"
call :reset
set "_action=call :count_key"
call :register_IDM
echo:
if defined _derror call :f_reset & goto done
set lockedkeys=
set "_action=call :lock_key"
echo 正在鎖定注冊表項...
echo:
call :action
if not defined _error if [%lockedkeys%] GEQ [7] (
echo:
echo %line%
echo:
call :_color %Green% "IDM已成功激活。"
echo:
call :_color %Gray% "如果屏幕出現無效序列號，請?jiān)俅芜\(yùn)行激活，之后就不會出現了。"
goto done
)
call :f_reset
::========================================================================================================================================
:done
echo %line%
echo:
echo:
if defined Unattended (
timeout /t 3
exit /b
)
call :_color %_Yellow% "按任意鍵返回..."
pause >nul
goto MainMenu
:done2
if defined Unattended (
timeout /t 3
exit /b
)
echo 按任意鍵退出...
pause >nul
exit /b
::========================================================================================================================================
:f_reset
echo:
echo %line%
echo:
call :_color %Red% "發現錯誤，正在重置IDM激活..."
set "_action=call :delete_key"
call :reset
echo:
echo %line%
echo:
call :_color %Red% "無法激活I(lǐng)DM。"
exit /b
::========================================================================================================================================
:reset
set take_permission=
call :delete_queue
set take_permission=1
call :action
call :add_key
exit /b
::========================================================================================================================================
:_rcont
reg add %reg% %nul%
call :_add_key
exit /b
:register_IDM
echo:
echo 正在應用注冊詳細信息...
echo:
If not defined name set name=Tonec FZE
set "reg=HKCU\SOFTWARE\DownloadManager /v FName /t REG_SZ /d "%name%"" & call :_rcont
set "reg=HKCU\SOFTWARE\DownloadManager /v LName /t REG_SZ /d """ & call :_rcont
set "reg=HKCU\SOFTWARE\DownloadManager /v Email /t REG_SZ /d "info@tonec.com"" & call :_rcont
set "reg=HKCU\SOFTWARE\DownloadManager /v Serial /t REG_SZ /d "FOX6H-3KWH4-7TSIN-Q4US7"" & call :_rcont
echo:
echo 正在觸發一些下載以創建某些注冊表項，請稍候....
set "file=%_temp%\temp.png"
set _fileexist=
set _derror=
%idmcheck% && taskkill /f /im idman.exe
set link=https://img02.100why.cn/HCT20250308/idm_box_min.png
call :download
set link=https://img02.100why.cn/HCT20250308/idman_logos.png
call :download
:: it may take some time to reflect registry keys.
timeout /t 3 >nul
set foundkeys=
call :action
if [%foundkeys%] GEQ [7] goto _skip
set link=https://img02.100why.cn/HCT20250308/idm_about.png
call :download
set link=https://img02.100why.cn/HCT20250308/indian.png
call :download
timeout /t 3 >nul
set foundkeys=
call :action
if not [%foundkeys%] GEQ [7] set _derror=1
:_skip
echo:
if not defined _derror (
echo 已成功創建所需的注冊表項。
) else (
if not defined _fileexist call :_color %Red% "無法使用IDM下載文件。"
call :_color %Red% "無法創建所需的注冊表項。"
call :_color %Magenta% "重試 - 使用腳本選項禁用 Windows防火墻 - 閱讀自述文件。"
)
echo:
%idmcheck% && taskkill /f /im idman.exe
if exist "%file%" del /f /q "%file%"
exit /b
:download
set /a attempt=0
if exist "%file%" del /f /q "%file%"
start "" /B "!IDMan!" /n /d "%link%" /p "%_temp%" /f temp.png
:check_file
timeout /t 1 >nul
set /a attempt+=1
if exist "%file%" set _fileexist=1&exit /b
if %attempt% GEQ 20 exit /b
goto :Check_file
::========================================================================================================================================
:delete_queue
echo:
echo 正在刪除注冊表項...
echo:
for %%# in (
""HKCU\Software\DownloadManager" "/v" "FName""
""HKCU\Software\DownloadManager" "/v" "LName""
""HKCU\Software\DownloadManager" "/v" "Email""
""HKCU\Software\DownloadManager" "/v" "Serial""
""HKCU\Software\DownloadManager" "/v" "scansk""
""HKCU\Software\DownloadManager" "/v" "tvfrdt""
""HKCU\Software\DownloadManager" "/v" "radxcnt""
""HKCU\Software\DownloadManager" "/v" "LstCheck""
""HKCU\Software\DownloadManager" "/v" "ptrk_scdt""
""HKCU\Software\DownloadManager" "/v" "LastCheckQU""
"%HKLM%"
) do for /f "tokens=* delims=" %%A in ("%%~#") do (
set "reg="%%~A"" ® query !reg! %nul% && call :delete_key
)
exit /b
::========================================================================================================================================
:add_key
echo:
echo 正在添加注冊表項...
echo:
set "reg="%HKLM%" /v "已啟用高級驅動程序2""
reg add %reg% /t REG_DWORD /d "1" /f %nul%
:_add_key
if [%errorlevel%]==[0] (
set "reg=%reg:"=%"
echo 已添加 - !reg!
) else (
set _error=1
set "reg=%reg:"=%"
%_psc% write-host 'Failed' -fore 'white' -back 'DarkRed' -NoNewline&echo - !reg!
)
exit /b
::========================================================================================================================================
:action
set garbagekeys=0
if exist %regdata% del /f /q %regdata% %nul%
reg query %CLSID% > %regdata%
%nul% %_psc% "(gc %regdata%) -replace 'HKEY_CURRENT_USER', 'HKCU' | Out-File -encoding ASCII %regdata%"
for /f %%a in (%regdata%) do (
for /f "tokens=%_tok% delims=\" %%# in ("%%a") do (
echo %%#|findstr /r "{.*-.*-.*-.*-.*}" >nul && (set "reg=%%a" & call :scan_key)
)
)
if exist %regdata% del /f /q %regdata% %nul%
exit /b
::========================================================================================================================================
:scan_key
reg query %reg% 2>nul | findstr /i "LocalServer32 InProcServer32 InProcHandler32" >nul && exit /b
reg query %reg% 2>nul | find /i "H" 1>nul || (
%_action%
exit /b
)
for /f "skip=2 tokens=*" %%a in ('reg query %reg% /ve 2^>nul') do echo %%a|findstr /r /e "[^0-9]" >nul || (
%_action%
exit /b
)
for /f "skip=2 tokens=3" %%a in ('reg query %reg%\Version /ve 2^>nul') do echo %%a|findstr /r "[^0-9]" >nul || (
%_action%
exit /b
)
for /f "skip=2 tokens=1" %%a in ('reg query %reg% 2^>nul') do echo %%a| findstr /i "MData Model scansk Therad" >nul && (
%_action%
exit /b
)
for /f "skip=2 tokens=*" %%a in ('reg query %reg% /ve 2^>nul') do echo %%a| find /i "+" >nul && (
%_action%
exit /b
)
exit/b
::========================================================================================================================================
:delete_key
reg delete %reg% /f %nul%
if not [%errorlevel%]==[0] if defined take_permission (
%nul% call :reg_own "%reg%" preserve S-1-1-0
reg delete %reg% /f %nul%
)
if [%errorlevel%]==[0] (
set "reg=%reg:"=%"
echo 已刪除 - !reg!
) else (
set "reg=%reg:"=%"
set _error=1
%_psc% write-host 'Failed' -fore 'white' -back 'DarkRed' -NoNewline & echo - !reg!
)
if defined take_permission (
set /a garbagekeys+=1
if !garbagekeys! EQU 12 echo --- Do not worry, only empty and leftover registry keys are being deleted.
)
exit /b
::========================================================================================================================================
:lock_key
%nul% call :reg_own "%reg%" "" S-1-1-0 S-1-0-0 Deny "FullContro"
reg delete %reg% /f %nul%
if not [%errorlevel%]==[0] (
set "reg=%reg:"=%"
echo 已鎖定 - !reg!
set /a lockedkeys+=1
) else (
set _error=1
set "reg=%reg:"=%"
%_psc% write-host 'Failed' -fore 'white' -back 'DarkRed' -NoNewline&echo - !reg!
)
exit /b
::========================================================================================================================================
:count_key
set /a foundkeys+=1
exit /b
::========================================================================================================================================
:: A lean and mean snippet to set registry ownership and permission recursively
:: Written by @AveYo aka @BAU
:: pastebin.com/XTPt0JSC
:reg_own
%_psc% $A='%~1','%~2','%~3','%~4','%~5','%~6';iex(([io.file]::ReadAllText('!_batp!')-split':Own1\:.*')[1])&exit/b:Own1:
$D1=[uri].module.gettype('System.Diagnostics.Process')."GetM`ethods"(42) |where {$_.Name -eq 'SetPrivilege'} #`:no-ev-warn
'SeSecurityPrivilege','SeTakeOwnershipPrivilege','SeBackupPrivilege','SeRestorePrivilege'|foreach {$D1.Invoke($null, @("$_",2))}
$path=$A[0]; $rk=$path-split'\\',2; $HK=gi -lit Registry::$($rk[0]) -fo; $s=$A[1]; $sps=[Security.Principal.SecurityIdentifier]
$u=($A[2],'S-1-5-32-544')[!$A[2]];$o=($A[3],$u)[!$A[3]];$w=$u,$o |% {new-object $sps($_)}; $old=!$A[3];$own=!$old; $y=$s-eq'all'
$rar=new-object Security.AccessControl.RegistryAccessRule( $w[0], ($A[5],'FullControl')[!$A[5]], 1, 0, ($A[4],'Allow')[!$A[4]] )
$x=$s-eq'none';function Own1($k){$t=$HK.OpenSubKey($k,2,'TakeOwnership');if($t){0,4|%{try{$o=$t.GetAccessControl($_)}catch{$old=0}
};if($old){$own=1;$w[1]=$o.GetOwner($sps)};$o.SetOwner($w[0]);$t.SetAccessControl($o); $c=$HK.OpenSubKey($k,2,'ChangePermissions')
$p=$c.GetAccessControl(2);if($y){$p.SetAccessRuleProtection(1,1)};$p.ResetAccessRule($rar);if($x){$p.RemoveAccessRuleAll($rar)}
$c.SetAccessControl($p);if($own){$o.SetOwner($w[1]);$t.SetAccessControl($o)};if($s){$subkeys=$HK.OpenSubKey($k).GetSubKeyNames()
foreach($n in $subkeys){Own1 "$k\$n"}}}};Own1 $rk[1];if($env:VO){get-acl Registry::$path|fl} #:Own1: lean & mean snippet by AveYo
::========================================================================================================================================
:_color
if %_NCS% EQU 1 (
echo %esc%[%~1%~2%esc%[0m
) else (
call :batcol %~1 "%~2"
)
exit /b
:_color2
if %_NCS% EQU 1 (
echo %esc%[%~1%~2%esc%[%~3%~4%esc%[0m
) else (
call :batcol %~1 "%~2" %~3 "%~4"
)
exit /b
::=======================================
:: Colored text with pure batch method
:: Thanks to @dbenham and @jeb
:: https://stackoverflow.com/a/10407642
:: Powershell is not used here because its slow
:batcol
pushd %_coltemp%
if not exist "'" (<nul >"'" set /p "=.")
setlocal
set "s=%~2"
set "t=%~4"
call :_batcol %1 s %3 t
del /f /q "'"
del /f /q "`.txt"
popd
exit /b
:_batcol
setlocal EnableDelayedExpansion
set "s=!%~2!"
set "t=!%~4!"
for /f delims^=^ eol^= %%i in ("!s!") do (
if "!" equ "" setlocal DisableDelayedExpansion
>`.txt (echo %%i\..\')
findstr /a:%~1 /f:`.txt "."
<nul set /p "=%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%"
)
if "%~4"=="" echo(&exit /b
setlocal EnableDelayedExpansion
for /f delims^=^ eol^= %%i in ("!t!") do (
if "!" equ "" setlocal DisableDelayedExpansion
>`.txt (echo %%i\..\')
findstr /a:%~3 /f:`.txt "."
<nul set /p "=%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%"
)
echo(
exit /b
::=======================================
:_colorprep
if %winbuild% GEQ 10586 (
for /F %%a in ('echo prompt $E ^| cmd') do set "esc=%%a"
set "Red="41;97m""
set "Gray="100;97m""
set "Black="30m""
set "Green="42;97m""
set "Blue="44;97m""
set "Yellow="43;97m""
set "Magenta="45;97m""
set "_Red="40;91m""
set "_Green="40;92m""
set "_Blue="40;94m""
set "_White="40;37m""
set "_Yellow="40;93m""
exit /b
)
if not defined _BS for /f %%A in ('"prompt $H&for %%B in (1) do rem"') do set "_BS=%%A %%A"
set "_coltemp=%SystemRoot%\Temp"
set "Red="CF""
set "Gray="8F""
set "Black="00""
set "Green="2F""
set "Blue="1F""
set "Yellow="6F""
set "Magenta="5F""
set "_Red="0C""
set "_Green="0A""
set "_Blue="09""
set "_White="07""
set "_Yellow="0E""
exit /b
::========================================================================================================================================
總結
以上是生活随笔為你收集整理的IDM 下载器 汉化注册激活的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。
- 上一篇： Hadoop二次开发项目案例方案汇总
- 下一篇： html常用样式margin、borde