I just upgraded my laptop from Windows 7 to Windows 10 and found that I am unable to start Virtualbox VMs configured with a bridged adapter.

See the configuration below:

解決方案

First of all you have to create a VirtualBox Host-Only Ethernet adapter

In Virtualbox :

Go to File > Preferences

On the Network tab select Host only Networks click on "add a Host-only adapter" give it a name by default it is "VirtualBox Host-Only Ethernet adapter"

In Windows :

go to Network connections on Windows and highlight both the real adapter and the new virtual ethernet adapter that you just created.

Right click and select "Bridge Connections", it's going to create a network bridge in Windows.

Now configure your VM :

in the Network part you can activate a new adapter and then select Attached to Host only adapter

Choose the VirtualBox Host-Only Ethernet adapter you have just created

You can now configure your static IP Address by modifying /etc/network/interfaces :

auto eth0

iface eth0 inet static

address 10.1.1.100

netmask 255.255.255.0

gateway 10.1.1.1

You can now restart eth0 by doing :

sudo ifdown eth0

sudo ifup eth0

Some wireless adapters don't work

總結

以上是生活随笔為你收集整理的virtualbox 创建桥接网络_Windows 10下的Virtualbox中的桥接网络不起作用的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。