我突然發現，自己平常使用的 iptables 和 ufw 到底是啥關系？平常其實iptables和ufw在配置防火墻，開啟端口是，還是偶爾會使用到的。

沒去思考過這兩者是啥關系，哎。。。，這就不夠好了！！學習，不就是應當舉一反三嗎？自己還有加油啊！主動性不夠！

百度一下，發現別人也和我一樣，有提出過這樣的問題？ 所以，有時候， 能提出問題，就已經是相當的了不起了！！

知之者不如樂知者，樂知者不如好知者！此話是相當的有道理啊！

下面是被人的提問，以及一些人的回答

還給出了ubuntu 官網的介紹：https://help.ubuntu.com/community/UFW#UFW_-_Uncomplicated_Firewall

下面是ubuntu 官網的介紹文檔：

--------------------------------------------------------------------------------------------------------------------------------------------

Firewall

Introduction

Traffic into or out of a computer is filtered through "ports," which are relatively arbitrary designations appended to traffic packets destined for use by a particular application.

By convention, some ports are routinely used for particular types of applications. For example, port 80 is generally used for insecure web browsing and port 443 is used for secure web browsing.

Traffic to particular applications can be allowed or blocked by "opening" or "closing" (i.e. filtering) the ports designated for a particular type of traffic. If port 80 is "closed," for example, no (insecure) web browsing will be possible. The?AntiVirus?page might also be of interest.

The Linux kernel includes the?netfilter?subsystem, which is used to manipulate or decide the fate of network traffic headed into or through your computer. All modern Linux firewall solutions use this system for packet filtering.

The kernel's packet filtering system would be of little use to users or administrators without a user interface with which to manage it. This is the purpose of?iptables. When a packet reaches your computer, it is handed off to the?netfilter?subsystem for acceptance, manipulation, or rejection based on the rules supplied to it via?iptables. Thus,?iptables?is all you need to manage your firewall (if you're familiar with it). Many front-ends are available to simplify the task, however.

Users can therefore configure the firewall to allow certain types of network traffic to pass into and out of a system (for instance SSH or web server traffic). This is done by opening and closing TCP and UDP "ports" in the firewall. Additionally, firewalls can be configured to allow or restrict access to specific IP addresses (or IP address ranges).?

?

Managing the Firewall

?

iptables

Iptables?is the database of firewall rules and is the actual firewall used in Linux systems. The traditional interface for configuring iptables in Linux systems is the command-line interface terminal. The other utilities in this section simplify the manipulation of the iptables database.?

?

UFW

UFW?(Uncomplicated Firewall) is a front-end for iptables and is particularly well-suited for host-based firewalls. UFW was developed specifically for Ubuntu (but is available in other distributions), and is also configured from the terminal.?

Gufw?is a graphical front-end to UFW, and is recommended for beginners.

UFW was introduced in Ubuntu 8.04 LTS (Hardy Heron), and is available by default in all Ubuntu installations after 8.04 LTS.

?

Guarddog

Guarddog is a front-end for iptables that functions in KDE-based desktops, such as Kubuntu. It has a greater deal of complexity (and flexibility, perhaps).

?

See Also

• Security

Other:

• DynamicFirewall

• firewall/ipkungfu

• firewall/Linux_UPnP_Internet_Gateway_Device_(linux-idg)

• Router/Firewall

?

External Links

• http://en.wikipedia.org/wiki/Firewall

• http://www.netfilter.org/?- Netfilter and iptables homepage

• http://www.fs-security.com/?- Firestarter homepage

• UbuntuFirewall?- Uncomplicated Firewall homepage

?

轉載于:https://www.cnblogs.com/oxspirt/p/6771091.html

總結

以上是生活随笔為你收集整理的ubuntu 中 iptables 和 ufw 的关系的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。