SAP物料批次管理的級別共分為三個不同且不能并存的級別，由高至低分別為：client level/集團級別、material level/物料級別、plant level/工廠級別。在SAP提供的標準功能下，批次級別的調整只能由低向高轉換：工廠級別-->物料級別-->集團級別。SAP提供的出廠狀態應該是工廠級別，如果想轉為物料級別，很容易做到，但需要慎重考慮，因?yàn)樵傧胝{(diào)回來就比較難了。這里提供的方法就是由物料級別向工廠級別轉換的方法，測試環境為IDES ECC6，Client 800默認為物料級別。方法來自SAP Notes:

Note 41715 - Resetting batch level from material to plant level

This type of conversion can only be made as of Release 3.1I（3.1I及以上版本可用）. Proceed as follows:

1. For all releases lower than Release 4.5B, implement the corrections and the modification in the report RM07CHDX as described in the correction instructions.

2. Create the report ZCHTCUCH, which is specified in the attachment.

3. Run this report in the clients for which you want to reset batch level to plant level.

4. Call transaction OMCT.

5. Check whether the batch level for "Batch unique at plant level" is set.

6. Implement Notes 821891, 944278, 950540 and 1091613 if you have not already done so (or you have not imported the corresponding Support Package).

7. Execute the function "Batch Level -> Conversion".

8. Define a plant for a plant view that may be missing.

9. Always execute the report in the test mode first. Analyze the error log.

10. If no errors occur,? you can execute the report in production mode.

11. If you are working with batch long texts, first execute the report ZM07CHDX_TEXT in test mode.

附：

ZCHTCUCH源代碼：

REPORT ZCHTCUCH. TABLES: TCUCH. SELECT * FROM TCUCH. ? IF TCUCH-KZDCH NE '0'. ????? TCUCH-KZDCH = '0'. ????? UPDATE TCUCH. ????? WRITE:/ 'TCUCH changed to plant-level'. ? ELSE. ????? WRITE:/ 'TCUCH already changed to plant-level'.? ? ENDIF. ENDSELECT.

相關程序：
RM07CHDX
RM07CHZX

總結

以上是生活随笔為你收集整理的SAP批次管理由物料级别转换到工厂级别的方法的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。