定義

The QProcess class is used to start external programs and to communicate with them.

QProcess類是用來啟動一個外部程序并與之通信。

使用說明

開啟外部線程的3中方式

To start a process, pass the name and command line arguments of the program you want to run as arguments to start(). Arguments are supplied as individual strings in a QStringList.

Alternatively, you can set the program to run with setProgram() and setArguments(), and then call start() or open().

想要啟動一個進程，可以傳遞你想啟動的程序的名字和命令行參數作為參數傳遞給start()函數。參數作為QStringList中每一個單獨的字符串。

或者，你可以通過setProgram()和setArguments()來設置該程序，然后調用start()或者open()啟動該程序。

啟動時在指定程序名時就附帶上參數

QProcess process; process.start("cmd /c ping 127.0.0.1");

• 1
• 2

啟動時分別指定函數名和參數列表

QProcess process; process.start("cmd", QStringList()<<"/c"<<"ping 127.0.0.1", QIODevice::ReadWrite);

• 1
• 2

分別指定函數名和參數，然后再啟動

QProcess process; process.setProgram("cmd"); process.setArguments(QStringList()<<"/c"<<"ping 127.0.0.1"); process.start(QIODevice::ReadWrite);

• 1
• 2
• 3
• 4

一次性讀取進程輸出

void readProcessAllOnce(bool processAutoExit) {qDebug()<<"readProcessAllOnce, processAutoExit ="<<processAutoExit;qDebug()<<"----------------------";bool ret;QProcess process;QString command;if(processAutoExit) {command = "cmd /c ping 127.0.0.1";} else {command = "cmd /k ping 127.0.0.1";}process.start(command);/** bool QProcess::waitForStarted(int msecs = 30000)*/ret = process.waitForStarted();qDebug()<<"waitForStarted"<<ret;qDebug()<<QDateTime::currentDateTime();/** 如果打開的不是自動關閉的進程，那么這里最多可能會等待30秒* bool QProcess::waitForFinished(int msecs = 30000)*/ret = process.waitForFinished();qDebug()<<QDateTime::currentDateTime();qDebug()<<"waitForFinished"<<ret;QByteArray byteArray = process.readAllStandardOutput();QString str = QString::fromLocal8Bit(byteArray);qDebug()<<str;process.close();qDebug()<<"";qDebug()<<"======================"; }

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11
• 12
• 13
• 14
• 15
• 16
• 17
• 18
• 19
• 20
• 21
• 22
• 23
• 24
• 25
• 26
• 27
• 28
• 29
• 30
• 31
• 32

按行讀取進程輸出

void readProcessByLine() {qDebug()<<"readProcessByLine";qDebug()<<"----------------------";bool ret;QProcess process(0);/** cmd /c 的命令執行完后會關閉窗口* cmd /k 的命令執行完后不會關閉窗口** aa && bb 就是執行aa，成功后再執行bb* aa || bb 先執行aa，若執行成功則不再執行bb，若失敗則執行bb* a & b 表示執行a再執行b，而無論a是否成功*/process.start("cmd", QStringList()<<"/k"<<"ping 127.0.0.1"<<"&"<<"exit", QIODevice::ReadWrite); // process.setProgram("cmd"); // process.setArguments(QStringList()<<"/k"<<"ping 127.0.0.1"<<"&"<<"exit"); // process.start(QIODevice::ReadWrite);ret = process.waitForStarted();qDebug()<<"waitForStarted"<<ret;qint64 maxSize = 512;char buffer[maxSize];qint64 len;while(true) {/** 一個waitForReadyRead信號可能輸出的是多行*/ret = process.waitForReadyRead();qDebug()<<"waitForReadyRead"<<ret;if(!ret) {break;}while(true) {len = process.readLine(buffer, maxSize);qDebug()<<"buffer len"<<len;/** 因?yàn)槊恳恍兄辽龠€有回車換行符，因此讀到0，說明waitForReadyRead超時返回false*/if(len <= 0) {break;}QString str = QString::fromLocal8Bit(buffer);qDebug()<<"qstring len"<<str.length();qDebug()<<str;qDebug()<<"";}}process.write("exit\r\n");ret = process.waitForFinished();qDebug()<<"waitForFinished"<<ret;process.close();qDebug()<<"";qDebug()<<"======================"; }

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11
• 12
• 13
• 14
• 15
• 16
• 17
• 18
• 19
• 20
• 21
• 22
• 23
• 24
• 25
• 26
• 27
• 28
• 29
• 30
• 31
• 32
• 33
• 34
• 35
• 36
• 37
• 38
• 39
• 40
• 41
• 42
• 43
• 44
• 45
• 46
• 47
• 48
• 49
• 50
• 51
• 52
• 53

與進程交互

void openProcessThenWrite() {qDebug()<<"openProcessThenWrite";qDebug()<<"----------------------";bool ret;QProcess *process = new QProcess(QThread::currentThread());/** 如果沒有QCoreApplication的話，會報如下錯誤* QObject::startTimer: Timers can only be used with threads started with QThread. timer只能在同一個線程中創建和啟動.*/process->start("cmd", QIODevice::ReadWrite);ret = process->waitForStarted();qDebug()<<"waitForReadyRead"<<ret;QByteArray byteArray = process->readAllStandardOutput();QString str = QString::fromLocal8Bit(byteArray);qDebug()<<str;//這里不加換行的話命令發不出去qint64 len = process->write("ping 127.0.0.1\r\nexit\r\n");qDebug()<<"write len"<<len;while(true) {/** 如果進程已經關閉，waitForReadyRead會直接返回false*/ret = process->waitForReadyRead();qDebug()<<"waitForReadyRead"<<ret;if(!ret) {break;}byteArray = process->readAllStandardOutput();str = QString::fromLocal8Bit(byteArray);qDebug()<<str;qDebug()<<"";}/** 如果沒有關閉cmd的指令，因此該process永遠不會finished，會超時(30秒)返回false*/ret = process->waitForFinished();qDebug()<<"waitForFinished"<<ret;process->close();delete process;qDebug()<<"";qDebug()<<"======================"; }

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11
• 12
• 13
• 14
• 15
• 16
• 17
• 18
• 19
• 20
• 21
• 22
• 23
• 24
• 25
• 26
• 27
• 28
• 29
• 30
• 31
• 32
• 33
• 34
• 35
• 36
• 37
• 38
• 39
• 40
• 41
• 42

測試函數

#include <QCoreApplication> #include <QDebug> #include <QProcess> #include <QThread> #include <QDateTime>void readProcessAllOnce(bool processAutoExit) {…… }void readProcessByLine() {…… }void openProcessThenWrite() {…… }int main(int argc, char *argv[]) {QCoreApplication a(argc, argv);qDebug()<<"======================";readProcessAllOnce(false);readProcessAllOnce(true);readProcessByLine();openProcessThenWrite();qDebug()<<"That's all";return a.exec(); }

總結

以上是生活随笔為你收集整理的Qt 进程 QProcess的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。