adc.h #ifndef __ADC_H__
#define __ADC_H__
#include "Gpio.h"//GPIO頭文件
#include "ets_sys.h"
#include "osapi.h"
#include "user_interface.h"
#include "user_devicefind.h"
#include "user_webserver.h"

#include "driver/gpio16.h"//GPIO16頭文件
#include "Gpio.h"//GPIO頭文件
#define SDAPIN? GPIO_ID_PIN(14)
#define SCLPIN? GPIO_ID_PIN(12)
#define SCLNAME? PERIPHS_IO_MUX_MTDI_U
#define SDANAME PERIPHS_IO_MUX_MTMS_U
#define SDAL GPIO_OUTPUT_SET(SDAPIN,0)
#define SCLL? GPIO_OUTPUT_SET(SCLPIN,0)
#define SDAH GPIO_OUTPUT_SET(SDAPIN,1)
#define SCLH? GPIO_OUTPUT_SET(SCLPIN,1)
#define SDAR? GPIO_INPUT_GET(SDAPIN)
void IICio_init();
//引腳初始化
?void Start_I2c();
//結束總線函數??
?void Stop_I2c();
//應答子函數
?void Ack_I2c(char a);
//字節數據發送函數
?void? SendByte(unsigned char? c);
//有子地址發送多字節數據函數???????????????
?char ISendStr(unsigned char sla,unsigned char suba,unsigned char *s,unsigned char no) ;
//無子地址發送多字節數據函數???
?char ISendStrExt(unsigned char sla,unsigned char *s,unsigned char no);
//無子地址讀字節數據函數???????????????
?unsigned char RcvByte();
char DACconversion(unsigned char sla,unsigned char c,? unsigned char Val);
#endif




adc.c

#include"adc.h"
#define NOP os_delay_us
char ack=1;???????????????? /*應答標志位*/

void IICio_init()
{
??PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDI_U,FUNC_GPIO12);//SCL
?PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTMS_U,FUNC_GPIO14);//SDA
}
/**************************************************
?????????????? 開始信號
? ************************************************/
void Start_I2c()
{
?SDAH;
?NOP(1);
?SCLH;
?NOP(5);
?SDAL;
?NOP(5);
?SCLL;
?NOP(2);
}

/**************************************************
????????????? 結束信號
? ************************************************/
void Stop_I2c()
{
?SDAL;
?NOP(1);
?SCLH;
?NOP(5);
?SDAH;
?NOP(4);
}

/*******************************************************************
???????????????? 字節數據發送函數???????????????
函數原型: void? SendByte(UCHAR c);
功能:???? 將數據c發送出去,可以是地址,也可以是數據,發完后等待應答,并對
????????? 此狀態位進行操作.(不應答或非應答都使ack=0)?????
?????????? 發送數據正常，ack=1; ack=0表示被控器無應答或損壞。
********************************************************************/
void? SendByte(unsigned char? c)
{
???? unsigned char? BitCnt;
SCLL;?
??
?for(BitCnt=0;BitCnt<8;BitCnt++)? /*要傳送的數據長度為8位*/
??? {
???? if((c<<BitCnt)&0x80) SDAH;?? /*判斷發送位*/
?????? else? SDAL;????????????????
???? NOP(5);
???? SCLH;?????????????? /*置時鐘線為高，通知被控器開始接收數據位*/
????? NOP(5);???????????? /*保證時鐘高電平周期大于4μs*/???
???? SCLL;?
? NOP(10);??
??? }
NOP(3);
??? SDAH;??????????????? /*8位發送完后釋放數據線，準備接收應答位*/
??? NOP(2);???
??? SCLH;
??? NOP(7);
??? if(SDAR == 0) ack=1;?????
?????? else ack=0;??????? /*判斷是否接收到應答信號*/
??? SCLL;
??? NOP(2);
?
}
/*******************************************************************
???????????????? 字節數據接收函數???????????????
函數原型: UCHAR? RcvByte();
功能:??????? 用來接收從器件傳來的數據,并判斷總線錯誤(不發應答信號)，
????????? 發完后請用應答函數應答從機。??
********************************************************************/????
unsigned char?? RcvByte()
{
? unsigned char? retc;
? unsigned char? BitCnt;
??
? retc=0;?
? SDAH;???????????????????? /*置數據線為輸入方式*/
? for(BitCnt=0;BitCnt<8;BitCnt++)
????? {
??????? NOP(1);???????????
??????? SCLL;????????????????? /*置時鐘線為低，準備接收數據位*/
??????? NOP(5);
??????? SCLH;????????????????? /*置時鐘線為高使數據線上數據有效*/
??????? NOP(2);
??????? retc=retc<<1;
??????? if(SDAR != 0) retc=retc+1;? /*讀數據位,接收的數據位放入retc中 */
??????? NOP(2);
????? }
? SCLL;????
? NOP(2);
? return(retc);
}

/********************************************************************
???????????????????? 應答子函數
函數原型:? void Ack_I2c(bit a);
功能:????? 主控器進行應答信號(可以是應答或非應答信號，由位參數a決定)
********************************************************************/
void Ack_I2c(char a)
{
??
? if(a==0) SDAL;????????????? /*在此發出應答或非應答信號 */
? else SDAH;
? NOP(3);?????
? SCLH;
? NOP(5);??????????????????? /*時鐘低電平周期大于4μs*/
? SCLL;???????????????????? /*清時鐘線，鉗住I2C總線以便繼續接收*/
? NOP(2);???
}




/*******************************************************************
DAC 變換, 轉化函數???????????????
*******************************************************************/
char DACconversion(unsigned char sla,unsigned char c,? unsigned char Val)
{
? Start_I2c();????????????? //啟動總線
?? SendByte(sla);??????????? //發送器件地址
?? if(ack==0)return(0);
?? SendByte(c);????????????? //發送控制字節
?? if(ack==0)return(0);
?? SendByte(Val);??????????? //發送DAC的數值??
?? if(ack==0)return(0);
?? Stop_I2c();?????????????? //結束總線
?? return(1);
}

/*******************************************************************
ADC發送字節[命令]數據函數???????????????
*******************************************************************/
char ISendByte(unsigned char sla,unsigned char c)
{
?
?? Start_I2c();????????????? //啟動總線
?? SendByte(sla);??????????? //發送器件地址
?? if(ack==0)return(0);
?? GPIO_OUTPUT_SET(GPIO_ID_PIN(13), 1);
?? SendByte(c);????????????? //發送數據
?? if(ack==0)return(0);
?? Stop_I2c();?????????????? //結束總線
?? ?GPIO_OUTPUT_SET(GPIO_ID_PIN(13), 0);
?? return(1);
}
/*******************************************************************
ADC讀字節數據函數???????????????
*******************************************************************/
unsigned char IRcvByte(unsigned char sla)
{? unsigned char c;
Start_I2c();????????? //啟動總線
?? SendByte(sla+1);????? //發送器件地址
?? if(ack==0)return(0);
?? c=RcvByte();????????? //讀取數據0
Ack_I2c(1);?????????? //發送非就答位
?? Stop_I2c();?????????? //結束總線
?? return(c);
}

總結

以上是生活随笔為你收集整理的pcf8951 ad/da（iic）转换模块 在 esp8266下的实现的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。