?

運行的是arduino 1.0.3，經過我修改代碼，可以運行在Arduino SDK 1.0.3中了。

Enjoy

http://www.kuaipan.cn/file/id_6055547405075407.htm

And here we could find the best place to follow the Air Pressure Tutorial for arduino on Sparkfun.com

http://www.sparkfun.com/tutorials/253? (in detail a lot) ?( recommended)

Here's its product.?https://www.sparkfun.com/products/9694??(notice consumers' discussion)

Here's something you should notice ! :

http://mitat.tuu.fi/?p=78

From the page of the link above we could get?things?no less than of those:

// Connect VCC to VCC and GND to GND, SCL goes to analogue pin 5, SDA to analogue pin4.
// Notice! Sparkfun breakoutboard contains already 4.7K pull ups,
// If not using pre-built pull-ups:
// --> Add some pull up resistors (1K to 20K, most often something like 4.7K) between SDA, SCL and VCC finishes the setup.

?

Read the page carefully before you try it. :)

?

?

also Here:

A tiny chip one :?http://jeelabs.org/2009/02/19/hooking-up-a-bmp085-sensor/

And here:?http://sensorapp.net/?p=278

?

BOSCH BMP085 數字式 氣溫模塊 氣壓模塊 氣壓傳感器模塊

轉載于:https://www.cnblogs.com/spaceship9/archive/2013/03/09/2951488.html

《新程序員》：云原生和全面數字化實踐50位技術專家共同創作，文字、視頻、音頻交互閱讀

總結

以上是生活随笔為你收集整理的arduino 大气气压模块 BOSCH BMP085的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。