1. Copy the VDSM certificate of the RHEV-H(Red Hat Enterprise Virtualization Hypervisor ) host to the RHEV-M machine. This certificate should be in the host, inside the file /etc/pki/vdsm/certs/vdsmcert.pem.

譯：復制虛擬機管理平臺主機的vdsm證書到虛擬機管理中心的機器上，這個證書的位置在/etc/pki/vdsm/certs/vdsmcert.pem.

2. Once you have the VDSM certificate in the engine machine verify that it has been signed by the certificate authority of the engine:

譯：一旦在engineserver上有了vdsm證書，就能夠通過engineserver的CA驗證簽約情況

# openssl verify -CAfile /etc/pki/ovirt-engine/ca.pem vdsmcert.pemvdsmcert.pem: OKAs in the example above the result should be "OK", if you get any other thing then there is a problem.

3. Check that the CA certificate used by both RHEV-H and RHEV-M is the same. In RHEV-H it is inside /etc/pki/vdsm/certs/cacert.pem, in RHEV-M it is inside /etc/pki/ovirt-engine/ca.pem.

譯：驗證 RHEV-H與 RHEV-H的CA證書是否一樣，在RHEV-H 的位置：/etc/pki/vdsm/certs/cacert.pem。在RHEV-M的位置：/etc/pki/ovirt-engine/ca.pem

4. From the RHEV-M machine verify that you can establish a SSL connection to the VDSM running in the RHEV-H machine:

譯：驗證在RHEV-M上，能否夠建立到RHEV-H中的VDSM的SSL連接

# openssl s_client \

-connect the_ip_of_the_rhev_h:54321 \

-cert /etc/pki/ovirt-engine/certs/engine.cer \

-key /etc/pki/ovirt-engine/keys/engine_id_rsa \

-CAfile /etc/pki/ovirt-engine/ca.pem

轉載于:https://www.cnblogs.com/mfrbuaa/p/5121736.html

總結

以上是生活随笔為你收集整理的vdsm的SSL证书验证过程的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。