Linux下的文件系統修復

• 一、進行磁盤分區
• 二、格式成xfs文件系統
• • 1.查看分區
  • 2.格式化分區
• 三、掛載分區
• • 1.查看分區的uuid
  • 2.將掛載信息寫入/etc/fstab
  • 3.掛載分區
• 四、破壞文件
• • 1.向/mnt/vdn3目錄中寫入文件
  • 2.卸載/mnt/vdb3/文件夾報錯處理
  • 3.卸載分區，破壞分區
  • 4.掛載分區報錯
• 五、修復分區
• 六、檢查文件狀態
• • 1.重新掛載分區
  • 2.查看文件
  • 3.ext4文件系統修復

一、進行磁盤分區

[root@node1 ~]# fdisk /dev/sdbWelcome to fdisk (util-linux 2.32.1). Changes will remain in memory only, until you decide to write them. Be careful before using the write command.Command (m for help): n Partition number (3-128, default 3): First sector (16779264-41943006, default 16779264): Last sector, +sectors or +size{K,M,G,T,P} (16779264-41943006, default 41943006): +2GCreated a new partition 3 of type 'Linux filesystem' and of size 2 GiB.Command (m for help): print Disk /dev/sdb: 20 GiB, 21474836480 bytes, 41943040 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 054D4516-ACE2-4C1A-BB38-1B93407B26A9Device Start End Sectors Size Type /dev/sdb1 2048 12584959 12582912 6G Linux filesystem /dev/sdb2 12584960 16779263 4194304 2G Linux filesystem /dev/sdb3 16779264 20973567 4194304 2G Linux filesystemCommand (m for help): w The partition table has been altered. Syncing disks.[root@node1 ~]#

二、格式成xfs文件系統

1.查看分區

[root@node1 ~]# ll /dev/sdb3 brw-rw---- 1 root disk 8, 19 Sep 24 11:13 /dev/sdb3 [root@node1 ~]#

2.格式化分區

[root@node1 ~]# mkfs.xfs /dev/sdb3 meta-data=/dev/sdb3 isize=512 agcount=4, agsize=131072 blks= sectsz=512 attr=2, projid32bit=1= crc=1 finobt=1, sparse=1, rmapbt=0= reflink=1 data = bsize=4096 blocks=524288, imaxpct=25= sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=2560, version=2= sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 [root@node1 ~]#

三、掛載分區

1.查看分區的uuid

UUID="c4477c1b-5ce7-4257-a44f-5e43e1d2a18e"

2.將掛載信息寫入/etc/fstab

# # /etc/fstab # Created by anaconda on Fri Mar 19 22:21:55 2021 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file, run 'systemctl daemon-reload' to update systemd # units generated from this file. # UUID=b7190d80-906f-4b9d-9ab4-5a503ecaea2c / xfs defaults 0 0 UUID=525a30a7-d484-4ed5-9f38-f827f54e29ff /boot xfs defaults 0 0 UUID=e6cf8733-5eec-4942-9429-c3e9087b6ff0 swap swap defaults 0 0 UUID="deff8218-3389-4245-a6bf-1716010fd6d4" /mnt/lv01 xfs defaults 0 0 UUID=7b7937af-408b-4370-9bd9-baa0cb5d1c6b swap swap defaults 0 0 UUID="c4477c1b-5ce7-4257-a44f-5e43e1d2a18e" /mnt/vdb3 xfs defaults 0 0

3.掛載分區

[root@node1 ~]# mount -a [root@node1 ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 970M 0 970M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.4M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/nvme0n1p3 18G 11G 7.3G 59% / /dev/mapper/vg01-lv01 7.0G 83M 7.0G 2% /mnt/lv01 /dev/nvme0n1p1 495M 140M 356M 29% /boot overlay 18G 11G 7.3G 59% /var/lib/docker/overlay2/3851b60316c4c9b3d888c4e6133589bee2882b3e231cf2c4d9ff42eca7a4a390/merged overlay 18G 11G 7.3G 59% /var/lib/docker/overlay2/8c7e59c24a0b2648c82f41eeddba522e58e06c6809ff702f641f6377b60e8d1f/merged tmpfs 197M 4.0K 197M 1% /run/user/0 /dev/sdb3 2.0G 47M 2.0G 3% /mnt/vdb3

四、破壞文件

1.向/mnt/vdn3目錄中寫入文件

[root@node1 ~]# cp -a /etc/passwd /etc/profile /mnt/vdb3/ [root@node1 ~]# ls /mnt/vdb3/ passwd profile [root@node1 ~]#

2.卸載/mnt/vdb3/文件夾報錯處理

[root@node1 ~]# umount /dev/sdb3 umount: /mnt/vdb3: target is busy.[root@node1 ~]# fuser -m /dev/sdb3 /dev/sdb3: 36728 [root@node1 ~]# ps aux |grep 36728 root 36728 0.0 0.1 45796 3908 ? Ss 11:08 0:00 /usr/libexec/openssh/sftp-server root 48587 0.0 0.0 12112 976 pts/0 R+ 11:37 0:00 grep --color=auto 36728[root@node1 ~]# kill -9 36728 [root@node1 ~]# ps aux |grep 36728 root 75342 0.0 0.0 12112 1068 pts/0 R+ 13:00 0:00 grep --color=auto 36728 [root@node1 ~]#

3.卸載分區，破壞分區

[root@node1 ~]# dd if=/dev/zero of=/dev/sdb3 bs=10k count=1 1+0 records in 1+0 records out 10240 bytes (10 kB, 10 KiB) copied, 0.00211146 s, 4.8 MB/s

4.掛載分區報錯

[root@node1 ~]# mount -a mount: /mnt/vdb3: can't find UUID="c4477c1b-5ce7-4257-a44f-5e43e1d2a18e". [root@node1 ~]#

五、修復分區

[root@node1 ~]# xfs_repair /dev/sdb3 Phase 1 - find and verify superblock... bad primary superblock - bad magic number !!!attempting to find secondary superblock... .found candidate secondary superblock... verified secondary superblock... writing modified primary superblock sb realtime bitmap inode 18446744073709551615 (NULLFSINO) inconsistent with calculated value 129 resetting superblock realtime bitmap ino pointer to 129 sb realtime summary inode 18446744073709551615 (NULLFSINO) inconsistent with calculated value 130 resetting superblock realtime summary ino pointer to 130 Phase 2 - using internal log- zero log...- scan filesystem freespace and inode maps... Metadata CRC error detected at 0x56526b345b72, xfs_agf block 0x1/0x200 Metadata CRC error detected at 0x56526b372862, xfs_agi block 0x2/0x200 bad magic # 0x0 for agf 0 bad version # 0 for agf 0 bad length 0 for agf 0, should be 131072 bad uuid 00000000-0000-0000-0000-000000000000 for agf 0 bad magic # 0x0 for agi 0 bad version # 0 for agi 0 bad length # 0 for agi 0, should be 131072 bad uuid 00000000-0000-0000-0000-000000000000 for agi 0 reset bad agf for ag 0 reset bad agi for ag 0 bad agbno 0 for btbno root, agno 0 bad agbno 0 for btbcnt root, agno 0 bad agbno 0 for refcntbt root, agno 0 bad agbno 0 for inobt root, agno 0 bad agbno 0 for finobt root, agno 0 agi unlinked bucket 0 is 0 in ag 0 (inode=0) agi unlinked bucket 1 is 0 in ag 0 (inode=0) agi unlinked bucket 2 is 0 in ag 0 (inode=0) agi unlinked bucket 3 is 0 in ag 0 (inode=0) agi unlinked bucket 4 is 0 in ag 0 (inode=0) agi unlinked bucket 5 is 0 in ag 0 (inode=0) agi unlinked bucket 6 is 0 in ag 0 (inode=0) agi unlinked bucket 7 is 0 in ag 0 (inode=0) agi unlinked bucket 8 is 0 in ag 0 (inode=0) agi unlinked bucket 9 is 0 in ag 0 (inode=0) agi unlinked bucket 10 is 0 in ag 0 (inode=0) agi unlinked bucket 11 is 0 in ag 0 (inode=0) agi unlinked bucket 12 is 0 in ag 0 (inode=0) agi unlinked bucket 13 is 0 in ag 0 (inode=0) agi unlinked bucket 14 is 0 in ag 0 (inode=0) agi unlinked bucket 15 is 0 in ag 0 (inode=0) agi unlinked bucket 16 is 0 in ag 0 (inode=0) agi unlinked bucket 17 is 0 in ag 0 (inode=0) agi unlinked bucket 18 is 0 in ag 0 (inode=0) agi unlinked bucket 19 is 0 in ag 0 (inode=0) agi unlinked bucket 20 is 0 in ag 0 (inode=0) agi unlinked bucket 21 is 0 in ag 0 (inode=0) agi unlinked bucket 22 is 0 in ag 0 (inode=0) agi unlinked bucket 23 is 0 in ag 0 (inode=0) agi unlinked bucket 24 is 0 in ag 0 (inode=0) agi unlinked bucket 25 is 0 in ag 0 (inode=0) agi unlinked bucket 26 is 0 in ag 0 (inode=0) agi unlinked bucket 27 is 0 in ag 0 (inode=0) agi unlinked bucket 28 is 0 in ag 0 (inode=0) agi unlinked bucket 29 is 0 in ag 0 (inode=0) agi unlinked bucket 30 is 0 in ag 0 (inode=0) agi unlinked bucket 31 is 0 in ag 0 (inode=0) agi unlinked bucket 32 is 0 in ag 0 (inode=0) agi unlinked bucket 33 is 0 in ag 0 (inode=0) agi unlinked bucket 34 is 0 in ag 0 (inode=0) agi unlinked bucket 35 is 0 in ag 0 (inode=0) agi unlinked bucket 36 is 0 in ag 0 (inode=0) agi unlinked bucket 37 is 0 in ag 0 (inode=0) agi unlinked bucket 38 is 0 in ag 0 (inode=0) agi unlinked bucket 39 is 0 in ag 0 (inode=0) agi unlinked bucket 40 is 0 in ag 0 (inode=0) agi unlinked bucket 41 is 0 in ag 0 (inode=0) agi unlinked bucket 42 is 0 in ag 0 (inode=0) agi unlinked bucket 43 is 0 in ag 0 (inode=0) agi unlinked bucket 44 is 0 in ag 0 (inode=0) agi unlinked bucket 45 is 0 in ag 0 (inode=0) agi unlinked bucket 46 is 0 in ag 0 (inode=0) agi unlinked bucket 47 is 0 in ag 0 (inode=0) agi unlinked bucket 48 is 0 in ag 0 (inode=0) agi unlinked bucket 49 is 0 in ag 0 (inode=0) agi unlinked bucket 50 is 0 in ag 0 (inode=0) agi unlinked bucket 51 is 0 in ag 0 (inode=0) agi unlinked bucket 52 is 0 in ag 0 (inode=0) agi unlinked bucket 53 is 0 in ag 0 (inode=0) agi unlinked bucket 54 is 0 in ag 0 (inode=0) agi unlinked bucket 55 is 0 in ag 0 (inode=0) agi unlinked bucket 56 is 0 in ag 0 (inode=0) agi unlinked bucket 57 is 0 in ag 0 (inode=0) agi unlinked bucket 58 is 0 in ag 0 (inode=0) agi unlinked bucket 59 is 0 in ag 0 (inode=0) agi unlinked bucket 60 is 0 in ag 0 (inode=0) agi unlinked bucket 61 is 0 in ag 0 (inode=0) agi unlinked bucket 62 is 0 in ag 0 (inode=0) agi unlinked bucket 63 is 0 in ag 0 (inode=0) sb_fdblocks 521704, counted 390638 root inode chunk not found Phase 3 - for each AG...- scan and clear agi unlinked lists...- process known inodes and perform inode discovery...- agno = 0 correcting imap correcting imap- agno = 1- agno = 2- agno = 3- process newly discovered inodes... Phase 4 - check for duplicate blocks...- setting up duplicate extent list...- check for inodes claiming duplicate blocks...- agno = 0- agno = 1- agno = 2- agno = 3 Phase 5 - rebuild AG headers and trees...- reset superblock... Phase 6 - check inode connectivity...- resetting contents of realtime bitmap and summary inodes- traversing filesystem ...- traversal finished ...- moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... Note - stripe unit (0) and width (0) were copied from a backup superblock. Please reset with mount -o sunit=<value>,swidth=<value> if necessary done [root@node1 ~]#

六、檢查文件狀態

1.重新掛載分區

[root@node1 ~]# mount -a [root@node1 ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 970M 1.0M 969M 1% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 22M 962M 3% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/nvme0n1p3 18G 11G 7.3G 59% / /dev/mapper/vg01-lv01 7.0G 83M 7.0G 2% /mnt/lv01 /dev/nvme0n1p1 495M 140M 356M 29% /boot overlay 18G 11G 7.3G 59% /var/lib/docker/overlay2/3851b60316c4c9b3d888c4e6133589bee2882b3e231cf2c4d9ff42eca7a4a390/merged overlay 18G 11G 7.3G 59% /var/lib/docker/overlay2/8c7e59c24a0b2648c82f41eeddba522e58e06c6809ff702f641f6377b60e8d1f/merged tmpfs 197M 4.0K 197M 1% /run/user/0 /dev/sdb3 2.0G 47M 2.0G 3% /mnt/vdb3 [root@node1 ~]#

2.查看文件

[root@node1 ~]# ls /mnt/vdb3/ passwd profile [root@node1 ~]# cat passwd root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync

3.ext4文件系統修復

[root@node1 ~]# fsck -v /dev/sdb3

總結

以上是生活随笔為你收集整理的Linux下的文件系统修复的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。