crtmpserver 配置说明_crtmpserver 流媒体服务器 集群 安装配置
red5單機還是比較不錯的，但是官方網站沒有文檔，不知道集群怎么配置，網查找了半天，只有red5 0.8版本有集群配置。以后的版本看了一下，有集群的插件，但是不知道怎么裝插件，就算裝好了插件，怎么配置集群，還是不知道啊。沒文檔坑爹。
crtmpserver 流媒體服務器，研究學習，感覺還是不錯的，下面說一下，集群配置。
一，crtmpserver下載
https://github.com/j0sh/crtmpserver
二，服務器說明
192.168.10.208 主服務器
192.168.10.202 從服務器
三，主從服務器安裝crtmpserver
1，安裝相關依賴包
# yum install cmake openssl openssl-devel gcc gcc-c++ make
2，安裝crtmpserver
# unzip centosinit.zip
# cd crtmpserver-centosinit
# chmod +x cleanup.sh
# sh cleanup.sh
# cd builders/cmake
# cmake .
# make
3，主服務器208配置
# vim ./crtmpserver/crtmpserver.lua
{ //85行，acceptors加入，rtmp可以使用80端口。如果80有其他用處，就不要這樣設置了
ip="0.0.0.0",
port=80,
protocol="inboundRtmp"
},
name="proxypublish", //256行，配置集群的地方
description="Application for forwarding streams to another RTMP server",
protocol="dynamiclinklibrary",
acceptors = //相當于一個連接池
{
{
ip="0.0.0.0",
port=6665, //連接池的端口
protocol="inboundRtmp" //添加
--protocol="inboundLiveFlv" //--注釋原來的
},
},
abortOnConnectError=true,
targetServers =
{
{
targetUri="rtmp://192.168.10.208/live/", //實際rtmp服務器
targetStreamType="live",
localStreamName="test",
keepAlive=true,
emulateUserAgent="my master"
},
{
targetUri="rtmp://192.168.10.202:1935/live/", //實際的rtmp服務器
targetStreamType="live",
emulateUserAgent="My user agent",
localStreamName="test",
keepAlive=true
}
}
注意，crtmpserver默認占用8080，8081，有的http會占用這二個端口。端口沖突的話，crtmpserver是啟不來的。
4，從服務器默認配置就行了，當然你想做一特殊配置也是可以的。
四，啟動主從服務器
# ./crtmpserver/crtmpserver ./crtmpserver/crtmpserver.lua
//出現以下內容說明啟動成功了
+-----------------------------------------------------------------------------+
| Services|
+---+---------------+-----+-------------------------+-------------------------+
| c | ip | port| protocol stack name | application name |
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 1112| inboundJsonCli| admin|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 80| inboundRtmp| appselector|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 1935| inboundRtmp| appselector|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 8081| inboundRtmps| appselector|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 8080| inboundRtmpt| appselector|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 6666| inboundLiveFlv| flvplayback|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 9999| inboundTcpTs| flvplayback|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 554| inboundRtsp| flvplayback|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 6665| inboundRtmp| proxypublish|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 8989| httpEchoProtocol| samplefactory|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 8988| echoProtocol| samplefactory|
+---+---------------+-----+-------------------------+-------------------------+
|tcp| 0.0.0.0| 1111| inboundHttpXmlVariant| vptests|
+---+---------------+-----+-------------------------+-------------------------+
/root/crtmpserver-centosinit/sources/crtmpserver/src/crtmpserver.cpp:272 GO! GO! GO! (31278)
注意，先啟動從服務器，這一點很重要。
五，測試crtmpserver集群配置，以下安裝在主服務器208
1，安裝rpmforge
# rpm -ivh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm
根你的linux版本選擇
2，安裝ffmpeg
# yum install ffmpeg
3，利用ffmpeg發布rtmp流
# ffmpeg -re -i "/root/test.flv" -vcodec copy -acodec copy -f flv rtmp://192.168.10.208:6665/live/test //連接池端口
ffmpeg version 2.2.1 Copyright (c) 2000-2014 the FFmpeg developers
built on Apr 13 2014 13:00:18 with gcc 4.4.6 (GCC) 20120305 (Red Hat 4.4.6-4)
configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --enable-shared --enable-runtime-cpudetect --enable-gpl --enable-version3 --enable-postproc --enable-avfilter --enable-pthreads --enable-x11grab --enable-vdpau --disable-avisynth --enable-frei0r --enable-libopencv --enable-libdc1394 --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -fPIC' --disable-stripping
libavutil 52. 66.100 / 52. 66.100
libavcodec 55. 52.102 / 55. 52.102
libavformat 55. 33.100 / 55. 33.100
libavdevice 55. 10.100 / 55. 10.100
libavfilter 4. 2.100 / 4. 2.100
libswscale 2. 5.102 / 2. 5.102
libswresample 0. 18.100 / 0. 18.100
libpostproc 52. 3.100 / 52. 3.100
Input #0, flv, from '/root/test.flv':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2mp41
encoder : Lavf55.33.100
Duration: 00:22:15.69, start: 0.000000, bitrate: 391 kb/s
Stream #0:0: Video: flv1, yuv420p, 320x240, 320 kb/s, 15 tbr, 1k tbn, 1k tbc
Stream #0:1: Audio: mp3, 22050 Hz, stereo, s16p, 0 kb/s
rtmp server sent error
rtmp server sent error
Output #0, flv, to 'rtmp://192.168.10.208:6665/live/test':
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2mp41
encoder : Lavf55.33.100
Stream #0:0: Video: flv1 ([2][0][0][0] / 0x0002), yuv420p, 320x240, q=2-31, 320 kb/s, 1k tbn, 1k tbc
Stream #0:1: Audio: mp3 ([2][0][0][0] / 0x0002), 22050 Hz, stereo, 0 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (copy)
Stream #0:1 -> #0:1 (copy)
Press [q] to stop, [?] for help
frame= 23 fps= 15 q=-1.0 size= 131kB time=00:00:01.54 bitrate= 694.1kbits/s //往rtmp通道傳輸數據，會不停的變化直接，直到視頻結束
4，接收rtmp流，網上工具好多，就不多說了
rtmp://192.168.10.208:6665/live/test
rtmp://192.168.10.208/live/test
rtmp://192.168.10.202:1935/live/test
以上三個rtmp通道，都可以看ffmpeg發布的視頻流
總結
以上是生活随笔為你收集整理的crtmpserver 配置说明_crtmpserver 流媒体服务器 集群 安装配置的全部內容，希望文章能夠幫你解決所遇到的問題。
- 上一篇： centos7启动dhcp失败_Cent
- 下一篇： setwindowpos怎么改变z序_置