1. Raid相關：

# 刪除已有的Raid配置

MegaCli64 -CfgLdDel -LALL -aALL ??

# 獲取設備ID和槽號

MegaCli64 -PDList -aALL|egrep 'Enclosure Device ID|Slot Number'|awk 'NR%2==0{print $3};NR%2!=0{print $4;}'

# 創建Raid5，$sdaslots為構造的符合參數要求的用來創建Raid的磁盤ID和槽號，大小為500G

MegaCli64 -CfgLdAdd -r5 "$sdaslots" WB RA Direct CachedBadBBU -sz500GB -a0

2. 遠程管理卡操作，使用sshpass則不需要手動輸入密碼， $user和$ip分別為iDRAC設備用戶名和密碼：

# 打開系統電源

sshpass -p $password ssh -o ConnectTimeout=90 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet $user@$ip racadm serveraction powerup

# 打開系統電源從PXE啟動，主要是為了通過網絡安裝系統

sshpass -p $password ssh -o ConnectTimeout=90 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet $user@$ip racadm config -g cfgServerInfo -o cfgServerBootOnce?

sshpass -p $password ssh -o ConnectTimeout=90 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet $user@$ip racadm config -g cfgServerInfo -o cfgServerFirstBootDevice PXE?

sshpass -p $password ssh -o ConnectTimeout=90 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet $user@$ip racadm serveraction powercycle

# 獲取系統電源狀態

sshpass -p $password ssh -o ConnectTimeout=90 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet $user@$ip racadm serveraction powerstatus 2>/dev/null|awk '{print $4}'

# 關閉系統電源

sshpass -p $password ssh -o ConnectTimeout=90 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet $user@$ip racadm serveraction powerdown

轉載于:https://www.cnblogs.com/woshiweige/p/4518424.html

總結

以上是生活随笔為你收集整理的Dell服务器相关操作的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。