ubuntu雖然能正常安裝，但是build時會出現閃退情況，閃退后一切歸零，沒啥錯誤提示，改用centos來安裝petalinux。

0.環境

vmware pro 14，centos 7.3
petalinux 2017.2

1.petalinux安裝環境配置

除了python,其他都用yum直接安裝即可,安裝UG1144里的所有庫
python安裝過程：

wget https://www.python.org/ftp/python/3.4.1/Python-3.4.1.tgz tar xf Python-3.4.1.tgz cd Python-3.4.1 ./configure make make install

安裝到/usr/local/bin/python3目錄了，在/usr/bin/中創建指向該位置的符號連接

ln -s /usr/local/bin/python3 /usr/bin/python3

2.安裝及配置

[root@localhost opt]# chown liuwanpeng:liuwanpeng -R /opt [root@localhost opt]# ls / -lh 總用量 28K ...... drwxr-xr-x. 3 root root 18 12月 4 14:01 mnt drwxr-xr-x. 4 liuwanpeng liuwanpeng 27 12月 4 14:40 opt dr-xr-xr-x. 223 root root 0 12月 4 16:15 proc ...... [root@localhost opt]# su liuwanpeng [liuwanpeng@localhost ~]$ ./petalinux-v2017.2-final-installer.run /opt/pkg/petalinux INFO: Checking installer checksum... INFO: Extracting PetaLinux installer... INFO: Installing PetaLinux... INFO: Checking PetaLinux installer integrity... INFO: Extracting Installation files...LICENSE AGREEMENTSPetaLinux SDK contains software from a number of sources. Please review the following licenses and indicate your acceptance of each to continue.You do not have to accept the licenses, however if you do not then you may not use PetaLinux SDK.Use PgUp/PgDn to navigate the license viewer, and press 'q' to closePress Enter to display the license agreements Do you accept Xilinx End User License Agreement? [y/N] > y Do you accept Webtalk Terms and Conditions? [y/N] > y Do you accept Third Party End User License Agreement? [y/N] > y INFO: Checking installation environment requirements... INFO: Checking free disk space INFO: Checking installed tools INFO: Checking installed development libraries INFO: Checking network and other services WARNING: No tftp server found - please refer to "PetaLinux SDK Installation Guide" for its impact and solution INFO: Installing PetaLinux SDK to "/opt/pkg/petalinux/." INFO: Installing PetaLinux zynqMP Yocto SDK to "/opt/pkg/petalinux/./components/yocto/source/aarch64"... PetaLinux Extensible SDK installer version 2017.2 ================================================= You are about to install the SDK to "/opt/pkg/petalinux/components/yocto/source/aarch64". Proceed[Y/n]? Y Extracting SDK.............................................done Setting it up... Extracting buildtools... done SDK has been successfully set up and is ready to be used. Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.$ . /opt/pkg/petalinux/components/yocto/source/aarch64/environment-setup-aarch64-xilinx-linux INFO: PetaLinux Yocto SDK for zynqMP has been successfully installed. INFO: Installing PetaLinux zynq Yocto SDK to "/opt/pkg/petalinux/./components/yocto/source/arm"... PetaLinux Extensible SDK installer version 2017.2 ================================================= You are about to install the SDK to "/opt/pkg/petalinux/components/yocto/source/arm". Proceed[Y/n]? Y Extracting SDK.........................................done Setting it up... Extracting buildtools... done SDK has been successfully set up and is ready to be used. Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.$ . /opt/pkg/petalinux/components/yocto/source/arm/environment-setup-cortexa9hf-neon-xilinx-linux-gnueabi INFO: PetaLinux Yocto SDK for zynq has been successfully installed. INFO: Installing PetaLinux microblaze (Full) Yocto SDK to "/opt/pkg/petalinux/./components/yocto/source/microblaze_full"... PetaLinux Extensible SDK installer version 2017.2 ================================================= You are about to install the SDK to "/opt/pkg/petalinux/components/yocto/source/microblaze_full". Proceed[Y/n]? Y Extracting SDK.............................done Setting it up... Extracting buildtools... done SDK has been successfully set up and is ready to be used. Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.$ . /opt/pkg/petalinux/components/yocto/source/microblaze_full/environment-setup-microblazeel-v10.0-bs-cmp-mh-div-xilinx-linux INFO: Installing PetaLinux microblaze (Lite) Yocto SDK to "/opt/pkg/petalinux/./components/yocto/source/microblaze_lite"... PetaLinux Extensible SDK installer version 2017.2 ================================================= You are about to install the SDK to "/opt/pkg/petalinux/components/yocto/source/microblaze_lite". Proceed[Y/n]? Y Extracting SDK.............................done Setting it up... Extracting buildtools... done SDK has been successfully set up and is ready to be used. Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.$ . /opt/pkg/petalinux/components/yocto/source/microblaze_lite/environment-setup-microblazeel-v10.0-bs-cmp-ml-xilinx-linux INFO: PetaLinux Yocto SDK for microblaze has been successfully installed. INFO: PetaLinux SDK has been installed to /opt/pkg/petalinux/.[liuwanpeng@localhost ~]$ source /opt/pkg/petalinux/settings.sh PetaLinux environment set to '/opt/pkg/petalinux' INFO: Checking free disk space INFO: Checking installed tools INFO: Checking installed development libraries INFO: Checking network and other services WARNING: No tftp server found - please refer to "PetaLinux SDK Installation Guide" for its impact and solution

每次打開termal時，上述命令需要重新輸入，太麻煩。可以將該命令加入到~/.bashrc文件中，每次打開termal會自動執行該腳本。

// 關閉網絡交互

[liuwanpeng@localhost ~]$ petalinux-util --webtalk off INFO: Turn off webtalk feature!

3. 建工程

[liuwanpeng@localhost mpsoc]$ petalinux-create -t project -s ../xilinx-zcu102-v2017.2-final.bsp INFO: Create project: INFO: Projects: INFO: * xilinx-zcu102-2017.2 INFO: has been successfully installed to /home/liuwanpeng/mpsoc/ INFO: New project successfully created in /home/liuwanpeng/mpsoc/

4.config

彈出的圖形界面配置里不用動

[liuwanpeng@localhost xilinx-zcu102-2017.2]$ petalinux-config --get-hw-description=hardware/xilinx-zcu102-2017.2/xilinx-zcu102-2017.2.sdk/ INFO: Getting hardware description... [INFO] generating Kconfig for project [INFO] menuconfig project /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/misc/config/Kconfig.syshw:30:warning: defaults for choice values not supported /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/misc/config/Kconfig:574:warning: config symbol defined without type configuration written to /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/project-spec/configs/config*** End of the configuration. *** Execute 'make' to start the build or try 'make help'.[INFO] sourcing bitbake [INFO] generating plnxtool conf [INFO] generating meta-plnx-generated layer ~/mpsoc/xilinx-zcu102-2017.2/build/misc/plnx-generated ~/mpsoc/xilinx-zcu102-2017.2 ~/mpsoc/xilinx-zcu102-2017.2 [INFO] generating machine configuration [INFO] generating bbappends for project . This may take time ! ~/mpsoc/xilinx-zcu102-2017.2/build/misc/plnx-generated ~/mpsoc/xilinx-zcu102-2017.2 ~/mpsoc/xilinx-zcu102-2017.2 [INFO] generating u-boot configuration files [INFO] generating kernel configuration files [INFO] generating kconfig for Rootfs Generate rootfs kconfig [INFO] oldconfig rootfs [INFO] generating petalinux-user-image.bb

5.build

總結：
-錯誤：install: cannot stat ‘/home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/../components/plnx_workspace/pmu-firmware/Release/pmu-firmware.elf’: No such file or directory
解決：缺庫，安裝libstdc++.i686,glibc-devel.i686,libz.so.1

• timeout while establishing a connection with SDK
  解決：AR# 69812沒用，看論壇https://forums.xilinx.com/xlnx/board/crawl_message?board.id=EDK&message.id=41823
  in fsbl and pmufw recipes add this two lines
  export _JAVA_OPTIONS
  _JAVA_OPTIONS = "-Duser.home=${TMPDIR}/xsctenv"

(1)出錯了 install: cannot stat ‘/home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/../components/plnx_workspace/pmu-firmware/Release/pmu-firmware.elf’: No such file or directory

[liuwanpeng@localhost xilinx-zcu102-2017.2]$ petalinux-build [INFO] building project [INFO] sourcing bitbake INFO: bitbake petalinux-user-image Loading cache: 100% |############################################| Time: 0:00:02 Loaded 3235 entries from dependency cache. Parsing recipes: 100% |##########################################| Time: 0:00:09 Parsing of 2446 .bb files complete (2407 cached, 39 parsed). 3236 targets, 224 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Initialising tasks: 100% |#######################################| Time: 0:01:28 Checking sstate mirror object availability: 100% |###############| Time: 0:00:13 NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks fsbl-2017.2+gitAUTOINC+122565ec40-r0 do_compile: NOTE: fsbl: compiling from external source tree /opt/pkg/petalinux/tools/hsm/data/embeddedsw pmu-firmware-2017.2+gitAUTOINC+122565ec40-r0 do_compile: NOTE: pmu-firmware: compiling from external source tree /opt/pkg/petalinux/tools/hsm/data/embeddedsw ERROR: pmu-firmware-2017.2+gitAUTOINC+122565ec40-r0 do_deploy: Function failed: do_deploy (log file is located at /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/temp/log.do_deploy.94828) ERROR: Logfile of failure stored in: /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/temp/log.do_deploy.94828 Log data follows: | DEBUG: Executing python function sstate_task_prefunc | DEBUG: Python function sstate_task_prefunc finished | DEBUG: Executing shell function do_deploy | install: cannot stat ‘/home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/../components/plnx_workspace/pmu-firmware/Release/pmu-firmware.elf’: No such file or directory | ERROR: Function failed: do_deploy (log file is located at /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/temp/log.do_deploy.94828) ERROR: Task (/opt/pkg/petalinux/components/yocto/source/aarch64/layers/meta-xilinx-tools/recipes-bsp/pmu/pmu-firmware_git.bb:do_deploy) failed with exit code '1' NOTE: Tasks Summary: Attempted 2399 tasks of which 1865 didn't need to be rerun and 1 failed.Summary: 1 task failed:/opt/pkg/petalinux/components/yocto/source/aarch64/layers/meta-xilinx-tools/recipes-bsp/pmu/pmu-firmware_git.bb:do_deploy

xilinx有專門的AR# 69293：跟上述問題還不是同一個
2017.1/2 Zynq UltraScale+ MPSoC: PetaLinux fails to build PMU Firmware on CentOS 7.2/3

Search for Another Answer

Description
Solution
Description

The 2017.1 release of PetaLinux fails to build PMUFW on CentOS 7.2/3 with a build error as shown below:

log.do_deploy:
install: cannot stat /home/wtsemb/Downloads/zcu102-centos-test/build/../components/plnx_workspace/pmu-firmware/Release/pmu-firmware.elf: No such file or directory
ERROR: Function failed: do_deploy (log file is located at /home/wtsemb/Downloads/zcu102-centos-test/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.1+gitAUTOINC+3813f14966-r0/temp/log.do_deploy.60209)
u
log.do_compile:
mb-gcc: error while loading shared libraries: libstdc++.so.6: wrong ELF class: ELFCLASS64
make[1]: *** [Makefile:25: xipipsu.o] Error 127
Solution

This can be due to missing packages which are required to build the PMUFW. The work-around for this issue is to install the packages below on the Linux host.

Once you install the packages and reboot Linux host, you can source PetaLinux tools and then create a new PetaLinux and build it.

libstdc++.i686
glibc-devel.i686
Was this Answer Record helpful?
光安裝上述庫有時不管用。直接查看log.do_deploy.94828之前的log文件，log.do_compile時有錯誤，缺少庫
mb-ar: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory

(2) Checking sstate mirror object availability不動了，安裝(1)的補丁之前無此問題，重啟后問題消失

[liuwanpeng@localhost xilinx-zcu102-2017.2]$ petalinux-build [INFO] building project [INFO] sourcing bitbake INFO: bitbake petalinux-user-image Loading cache: 100% |############################################| Time: 0:00:03 Loaded 3235 entries from dependency cache. Parsing recipes: 100% |##########################################| Time: 0:00:08 Parsing of 2446 .bb files complete (2407 cached, 39 parsed). 3236 targets, 224 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Initialising tasks: 100% |#######################################| Time: 0:01:35 Checking sstate mirror object availability: 3% | | ETA: 0:04:30 Keyboard Interrupt, closing down...

（3）又來了新錯誤，"timeout while establishing a connection with SDK""

[liuwanpeng@localhost xilinx-zcu102-2017.2]$ petalinux-build [INFO] building project INFO: bitbake petalinux-user-image Loading cache: 100% |############################################| Time: 0:00:02 Loaded 3235 entries from dependency cache. Parsing recipes: 100% |##########################################| Time: 0:00:07 Parsing of 2446 .bb files complete (2407 cached, 39 parsed). 3236 targets, 224 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Initialising tasks: 100% |#######################################| Time: 0:01:26 Checking sstate mirror object availability: 100% |###############| Time: 0:00:13 NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks fsbl-2017.2+gitAUTOINC+122565ec40-r0 do_compile: NOTE: fsbl: compiling from external source tree /opt/pkg/petalinux/tools/hsm/data/embeddedsw ERROR: pmu-firmware-2017.2+gitAUTOINC+122565ec40-r0 do_configure: Function failed: do_configure (log file is located at /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/temp/log.do_configure.71493) ERROR: Logfile of failure stored in: /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/temp/log.do_configure.71493 Log data follows: | DEBUG: Executing python function sysroot_cleansstate | DEBUG: Python function sysroot_cleansstate finished | DEBUG: Executing shell function do_configure | MISC_ARG is -yamlconf /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/pmu-firmware.yaml | APP_ARG is -app "ZynqMP PMU Firmware" | cmd is: xsct /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/app.tcl -ws /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/../components/plnx_workspace -pname pmu-firmware -rp /opt/pkg/petalinux/tools/hsm/data/embeddedsw -processor psu_pmu_0 -hdf /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/deploy/images/plnx_aarch64/Xilinx-plnx_aarch64.hdf -arch 32 -app "ZynqMP PMU Firmware" -yamlconf /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/pmu-firmware.yaml | Starting xsdk. This could take few seconds... Eclipse: | An error has occurred. See the log file | /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/components/plnx_workspace/.metadata/.log. | XSCTHELPER INFO: Empty WorkSpace | Starting xsdk. This could take few seconds... Eclipse: | An error has occurred. See the log file | /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/components/plnx_workspace/.metadata/.log. | timeout while establishing a connection with SDK | while executing | "error "timeout while establishing a connection with SDK"" | (procedure "getsdkchan" line 111) | invoked from within | "getsdkchan" | (procedure "::sdk::set_user_repo_path_sdk" line 16) | invoked from within | "::sdk::set_user_repo_path_sdk $params(set)" | (procedure "repo" line 27) | invoked from within | "repo -set $path" | invoked from within | "if { $params(ws) ne "" } { | #Local Work Space available | setws $params(ws) | if { [catch {importprojects $params(ws)} result] } { | puts "XSCTHELPER IN..." | (file "/home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/app.tcl" line 120) | WARNING: /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/temp/run.do_configure.71493:1 exit 1 from 'xsct /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/app.tcl -ws /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/../components/plnx_workspace -pname pmu-firmware -rp /opt/pkg/petalinux/tools/hsm/data/embeddedsw -processor psu_pmu_0 -hdf /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/deploy/images/plnx_aarch64/Xilinx-plnx_aarch64.hdf -arch 32 -app "ZynqMP PMU Firmware" -yamlconf /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/pmu-firmware.yaml' | ERROR: Function failed: do_configure (log file is located at /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/tmp/work/plnx_aarch64-xilinx-linux/pmu-firmware/2017.2+gitAUTOINC+122565ec40-r0/temp/log.do_configure.71493) ERROR: Task (/opt/pkg/petalinux/components/yocto/source/aarch64/layers/meta-xilinx-tools/recipes-bsp/pmu/pmu-firmware_git.bb:do_configure) failed with exit code '1'

解決方法：
AR# 69812
2016.4-2017.2 PetaLinux: Build failed due to "error "timeout while establishing a connection with SDK"'

PetaLinux build can fail with the following timeout error in XSCT:

DEBUG: Executing python function sysroot_cleansstate
DEBUG: Python function sysroot_cleansstate finished
DEBUG: Executing shell function do_configure
MISC_ARG is -yamlconf /tmp/4x10GE-2017.09.12-16.17.33/work/plnx_aarch64-xilinx-linux/fsbl/2017.2+gitAUTOINC+122565ec40-r0/fsbl.yaml
APP_ARG is -app "Zynq MP FSBL"
cmd is: xsct /tmp/4x10GE-2017.09.12-16.17.33/work/plnx_aarch64-xilinx-linux/fsbl/2017.2+gitAUTOINC+122565ec40-r0/app.tcl -ws /home/bryanloz/ZCU102_4PES/4x10GE-Switch/Petalinux/4x10GE/build/../components/plnx_workspace -pname fsbl -rp /proj/petalinux/released/Petalinux-v2017.2/petalinux-v2017.2_0619_1/tools/hsm/data/embeddedsw -processor psu_cortexa53_0 -hdf /tmp/4x10GE-2017.09.12-16.17.33/deploy/images/plnx_aarch64/Xilinx-plnx_aarch64.hdf -arch 64 -app "Zynq MP FSBL" -yamlconf /tmp/4x10GE-2017.09.12-16.17.33/work/plnx_aarch64-xilinx-linux/fsbl/2017.2+gitAUTOINC+122565ec40-r0/fsbl.yaml
Starting xsdk. This could take few seconds... Eclipse:
An error has occurred. See the log file
/home/bryanloz/ZCU102_4PES/4x10GE-Switch/Petalinux/4x10GE/components/plnx_workspace/.metadata/.log.
XSCTHELPER INFO: Empty WorkSpace
Starting xsdk. This could take few seconds... Eclipse:
An error has occurred. See the log file
/home/bryanloz/ZCU102_4PES/4x10GE-Switch/Petalinux/4x10GE/components/plnx_workspace/.metadata/.log.
timeout while establishing a connection with SDK
while executing
"error "timeout while establishing a connection with SDK""
(procedure "getsdkchan" line 111)
invoked from within
"getsdkchan"
(procedure "::sdk::set_user_repo_path_sdk" line 16)
invoked from within
"::sdk::set_user_repo_path_sdk $params(set)"
(procedure "repo" line 27)
invoked from within
"repo -set $path"
invoked from within
"if { $params(ws) ne "" } {
#Local Work Space available
setws $params(ws)
if { [catch {importprojects $params(ws)} result] } {
puts "XSCTHELPER IN..."
(file "/tmp/4x10GE-2017.09.12-16.17.33/work/plnx_aarch64-xilinx-linux/fsbl/2017.2+gitAUTOINC+122565ec40-r0/app.tcl" line 120)
WARNING: /tmp/4x10GE-2017.09.12-16.17.33/work/plnx_aarch64-xilinx-linux/fsbl/2017.2+gitAUTOINC+122565ec40-r0/temp/run.do_configure.22432:1 exit 1 from 'eval xsct /tmp/4x10GE-2017.09.12-16.17.33/work/plnx_aarch64-xilinx-linux/fsbl/2017.2+gitAUTOINC+122565ec40-r0/app.tcl -ws /home/bryanloz/ZCU102_4PES/4x10GE-Switch/Petalinux/4x10GE/build/../components/plnx_workspace -pname fsbl -rp /proj/petalinux/released/Petalinux-v2017.2/petalinux-v2017.2_0619_1/tools/hsm/data/embeddedsw -processor psu_cortexa53_0 -hdf /tmp/4x10GE-2017.09.12-16.17.33/deploy/images/plnx_aarch64/Xilinx-plnx_aarch64.hdf -arch 64 ${APP_ARG} ${MISC_ARG}'
ERROR: Function failed: do_configure (log file is located at /tmp/4x10GE-2017.09.12-16.17.33/work/plnx_aarch64-xilinx-linux/fsbl/2017.2+gitAUTOINC+122565ec40-r0/temp/log.do_configure.22432)

解決方案

The following work-arounds can be used to overcome this issue

1) Increase the timeout in XSCT.

Create a file with name .xsdbrc in the $HOME directory
Add the line below in the .xsdbrc file
configparams-sdk-launch-timeout 180

2) Clean up using the following commands:

rm -rf ~/.Xil
rm -rf ~/.Xilinx
Note: This error could be due to a resource constraint on the PC.

The minimum configuration required for PetaLinux tool installation is 8 cores and 8GB RAM (This is not corrected in 2016.4-2017.2 (UG1144) documentation).

Ideally one project should be built at a time.

If you want to run projects in parallel, set parallel threads and configure execution in petalinux-config->Yocto Settings to lower values which match your system configuration.

[liuwanpeng@localhost xilinx-zcu102-2017.2]$ cd ~
[liuwanpeng@localhost ~]$ echo $HOME
/home/liuwanpeng
[liuwanpeng@localhost ~]$ pwd
/home/liuwanpeng
[liuwanpeng@localhost ~]$ touch .xsdbrc
[liuwanpeng@localhost ~]$ gedit .xsdbrc
[liuwanpeng@localhost ~]$ rm -rf ~/.Xil
[liuwanpeng@localhost ~]$ rm -rf ~/.Xilinx

無效，提示source xxxx/.xsdbrc error。
增加x權限再試,沒用

==按技術支持提供的方法：==
https://forums.xilinx.com/xlnx/board/crawl_message?board.id=EDK&message.id=41823
Xilinx 2016.4 - xsct - Timeout while building fsbl and pmu-firmware
Re: Xilinx 2016.4 - xsct - Timeout while building fsbl and pmu-firmware
Options
?10-03-2017 02:05 AM
The reason for failure is xsct uses a locking mechanism which is by default set to /home/user/
you have to change this
in fsbl and pmufw recipes add this two lines
export _JAVA_OPTIONS
_JAVA_OPTIONS = "-Duser.home=${TMPDIR}/xsctenv"

有兩個fsbl文件
./project-spec/meta-plnx-generated/recipes-bsp/fsbl/fsbl_%.bbappend
./project-spec/meta-user/recipes-bsp/fsbl/fsbl_%.bbappend
一個mufw
./project-spec/meta-plnx-generated/recipes-bsp/pmu/pmu-firmware_%.bbappend
都加上

我擦，真的編過去了，用了上面的方法：

[liuwanpeng@localhost xilinx-zcu102-2017.2]$ petalinux-build [INFO] building project [INFO] sourcing bitbake INFO: bitbake petalinux-user-image Loading cache: 100% |############################################| Time: 0:00:02 Loaded 3235 entries from dependency cache. Parsing recipes: 100% |##########################################| Time: 0:00:07 Parsing of 2446 .bb files complete (2407 cached, 39 parsed). 3236 targets, 224 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Initialising tasks: 100% |#######################################| Time: 0:00:40 Checking sstate mirror object availability: 100% |###############| Time: 0:00:17 NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks fsbl-2017.2+gitAUTOINC+122565ec40-r0 do_compile: NOTE: fsbl: compiling from external source tree /opt/pkg/petalinux/tools/hsm/data/embeddedsw pmu-firmware-2017.2+gitAUTOINC+122565ec40-r0 do_compile: NOTE: pmu-firmware: compiling from external source tree /opt/pkg/petalinux/tools/hsm/data/embeddedsw NOTE: Tasks Summary: Attempted 2445 tasks of which 1869 didn't need to be rerun and all succeeded. INFO: generating FIT Image INFO: bitbake petalinux-user-image -R /home/liuwanpeng/mpsoc/xilinx-zcu102-2017.2/build/conf/fit-image.conf Parsing recipes: 100% |##########################################| Time: 0:04:21 Parsing of 2446 .bb files complete (0 cached, 2446 parsed). 3236 targets, 224 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Initialising tasks: 100% |#######################################| Time: 0:00:21 Checking sstate mirror object availability: 100% |###############| Time: 0:00:03 NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks NOTE: Tasks Summary: Attempted 2446 tasks of which 2419 didn't need to be rerun and all succeeded. INFO: Copying Images from deploy to images INFO: Creating images/linux directory [INFO] successfully built project

轉載于:https://www.cnblogs.com/liuwanpeng/p/8074051.html

總結

以上是生活随笔為你收集整理的MPSOC之3——centos环境配置及petalinux安装及使用的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。