华三h3c交换机最详细的配置实例手册_华为/思科/华三基本命令对比
很多朋友反映,對華為/思科/華三交換機配置命令有些分不清楚,那么今天弱電君和大家來看下他們的區別在哪里,這里對命令做了個匯總,平時對命令不熟的朋友這次可以看下。
CISCO | H3C | HUAWEI | 描述 |
no | undo | undo | 取消、關閉當前設置 |
show | display | display | 顯示查看 |
exit | quit | quit | 退回上級 |
hostname | sysname | sysname | 設置主機名 |
en, config terminal | system-view | system-view | 進入全局模式 |
delete | delete | delete | 刪除文件 |
reload | reboot | reboot | 重啟 |
write | save | save | 保存當前配置 |
username | local-user | local-user | 創建用戶 |
shutdown | shutdown | shutdown | 禁止、關閉 端口 |
show version | display version | display version | 顯示當前系統版本 |
show startup-config | display ?saved-configuration | display ?saved-configuration | 查看已保存過的配置 |
show running-config | display ?current-configuration | display ?current-configuration | 顯示當前配置 |
no debug all | ctrl+d | ctrl+d | 取消所有debug命令 |
erase startup-config | reset saved-configuration | reset saved-configuration | 刪除配置 |
end | return | return | 退到用戶視圖 |
exit | logout | logout | 登出 |
logging | info-center | info-center | 指定信息中心配置信息 |
line | user-interface | user-interface | 進入線路配置(用戶接口)模式 |
start-config | saved-configuration | saved-configuration | 啟動配置 |
running-config | current-configuration | current-configuration | 當前配置 |
host | ip host | ip host | host名字和ip地址對應 |
交換部分 | |||
enable password | set authentication ?password simple | set authentication ?password simple | 配置明文密碼 |
interface type/number | interface type/number | interface type/number | 進入接口 |
interface vlan 1 | interface vlan 1 | interface vlan 1 | 進入vlan配置vlan管理地址 |
interface rang | interface ethID to ID | interface ethID to ID | 定議多個端口的組 |
enabl esecret | super password | super password | 設置特權口令 |
duplex (half|full|auto) | duplex (half|full|auto) | duplex (half|full|auto) | 配置接口狀態 |
speed (10/100/1000) | speed (10/100/1000) | speed (10/100/1000) | 配置端口速率 |
switchport mode trunk | port link-type trunk | port link-type trunk | 配置trunk |
vlan ID /no vlan ID | vlan batch ID /undo vlan batch ID | vlan batch ID /undo vlan batch ID | 添加、刪除vlan |
switchport access ?vlan | port default vlan ID | port acces vlan ID | 將端口接入vlan |
show interface | display interface | display interface | 查看接口 |
show vlan ID | display vlan ID | display vlan ID | 查看vlan |
encapsulation | link-protocol | link-protocol | 封裝協議 |
channel-group 1 mode on | port link-aggregation ?group 1 | port link-aggregation ?group 1 | 鏈路聚合 |
ip routing | 默認開啟 | 默認開啟 | 開啟三層交換的路由功能 |
no switchport | 不支持 | 不支持 | 開啟接口三層功能 |
vtp domain | GVRP | GVRP | 對跨以太網交換機的VLAN進行動態注冊和刪除 |
spanning-tree vlan ID ?root primary | stp instance id root primary | stp instance id root primary | stp配置根網橋 |
spanning-tree vlan ID ?priority | stp primary vlaue | stp primary vlaue | 配置網橋優先級 |
show spanning-tree | dis stp brief | dis stp brief | 查看STP配置 |
路由部分 | |||
ip route 0.0.0.0 ?0.0.0.0 | ip route-static ?0.0.0.0 0.0.0.0 | ip route-static ?0.0.0.0 0.0.0.0 | 配置默認路由 |
ip route 目標網段+掩碼 下一跳 | ip route-static 目標網段+掩碼 下一跳 | ip route-static 目標網段+掩碼 下一跳 | 配置靜態路由 |
show ip route | display ip ?routing-table | display ip ?routing-table | 查看路由表 |
router rip /network 網段 | rip /network 網段 | rip /network 網段 | 啟用rip、并宣告網段 |
router ospf | ospf | ospf | 啟用ospf |
network ip 反碼 area | area ? | area ? | 配置OSPF區域 |
no auto-summary | rip split-horizon | rip split-horizon | 配置RIP V2水平分割 |
show ip protocol | display ip protocol | display ip protocol | 查看路由協議 |
access-list 1-99 ?permit/deny IP | rule id permit source ?IP | rule id permit source ?IP | 標準訪問控制列表 |
access-list 100-199 ?permit/deny protocol source IP+反碼 ?destination IP+反碼 operator operan | rule ?{normal|special}{permit|deny}{tcp|udp}source {|any}destination ?|any}[operate] | rule ?{normal|special}{permit|deny}{tcp|udp}source {|any}destination ?|any}[operate] | 擴展訪問控制列表 |
standby group-number ?ip virtual-ip | vrrp vrid number ?virtual-ip | vrrp vrid number ?virtual-ip | 配置HSRP組 |
standby group-number ?priority | vrrp vrid number ?priority | vrrp vrid number ?priority | 配置HSRP優先級 |
standby group-number ?preempt | vrrp vrid number ?preempt-mode | vrrp vrid number ?preempt-mode | 配置HSRP占先權 |
standby group-number ?track | 配置端口跟蹤 | ||
ip nat inside source ?static | nat server global ? [port] inside port [protocol] | nat server global ? [port] inside port [protocol] | 配置靜態地址轉換 |
AI人工智能-安防課程,安防行業目前難得誠意的在線課程,點擊左下角“閱讀原文”進行報名,系統化豐富您的“安防+AI”技術儲備。
這是關于安防最詳細的課程了
總結
以上是生活随笔為你收集整理的华三h3c交换机最详细的配置实例手册_华为/思科/华三基本命令对比的全部?jī)?nèi)容,希望文章能夠幫你解決所遇到的問題。
- 上一篇: 快递寄10斤被子多少钱
- 下一篇: python编译环境搭建_python开