目錄
前言
源碼解析
主函數
自定義模型
遮蔽詞預測
下一句預測
規范化數據集
前言
本部分介紹BERT訓練過程，BERT模型訓練過程是在自己的TPU上進行的，這部分我沒做過研究所以不做深入探討。BERT針對兩個任務同時訓練。1.下一句預測。2.遮蔽詞識別
下面介紹BERT的預訓練模型run_pretraining.py是怎么訓練的。

源碼解析
主函數
訓練過程主要用了estimator調度器。這個調度器支持自定義訓練過程，將訓練集傳入之后自動訓練。詳情見注釋

def main(_):
tf.logging.set_verbosity(tf.logging.INFO)

if not FLAGS.do_train and not FLAGS.do_eval:
raise ValueError("At least one of `do_train` or `do_eval` must be True.")

bert_config = modeling.BertConfig.from_json_file(FLAGS.bert_config_file)

tf.gfile.MakeDirs(FLAGS.output_dir)

input_files = []
for input_pattern in FLAGS.input_file.split(","):
input_files.extend(tf.gfile.Glob(input_pattern))

tf.logging.info("*** Input Files ***")
for input_file in input_files:
tf.logging.info(" %s" % input_file)

tpu_cluster_resolver = None
if FLAGS.use_tpu and FLAGS.tpu_name:
tpu_cluster_resolver = tf.contrib.cluster_resolver.TPUClusterResolver(
FLAGS.tpu_name, zone=FLAGS.tpu_zone, project=FLAGS.gcp_project)

is_per_host = tf.contrib.tpu.InputPipelineConfig.PER_HOST_V2
run_config = tf.contrib.tpu.RunConfig( #訓練參數
cluster=tpu_cluster_resolver,
master=FLAGS.master,
model_dir=FLAGS.output_dir,
save_checkpoints_steps=FLAGS.save_checkpoints_steps,
tpu_config=tf.contrib.tpu.TPUConfig(
iterations_per_loop=FLAGS.iterations_per_loop,
num_shards=FLAGS.num_tpu_cores,
per_host_input_for_training=is_per_host))

model_fn = model_fn_builder( #自定義模型，用于estimator訓練
bert_config=bert_config,
init_checkpoint=FLAGS.init_checkpoint,
learning_rate=FLAGS.learning_rate,
num_train_steps=FLAGS.num_train_steps,
num_warmup_steps=FLAGS.num_warmup_steps,
use_tpu=FLAGS.use_tpu,
use_one_hot_embeddings=FLAGS.use_tpu)

# If TPU is not available, this will fall back to normal Estimator on CPU
# or GPU.
estimator = tf.contrib.tpu.TPUEstimator( #創建TPUEstimator
use_tpu=FLAGS.use_tpu,
model_fn=model_fn,
config=run_config,
train_batch_size=FLAGS.train_batch_size,
eval_batch_size=FLAGS.eval_batch_size)

if FLAGS.do_train: #訓練過程
tf.logging.info("***** Running training *****")
tf.logging.info(" Batch size = %d", FLAGS.train_batch_size)
train_input_fn = input_fn_builder( #創建輸入訓練集
input_files=input_files,
max_seq_length=FLAGS.max_seq_length,
max_predictions_per_seq=FLAGS.max_predictions_per_seq,
is_training=True)
estimator.train(input_fn=train_input_fn, max_steps=FLAGS.num_train_steps)

if FLAGS.do_eval: #驗證過程
tf.logging.info("***** Running evaluation *****")
tf.logging.info(" Batch size = %d", FLAGS.eval_batch_size)

eval_input_fn = input_fn_builder( #創建驗證集
input_files=input_files,
max_seq_length=FLAGS.max_seq_length,
max_predictions_per_seq=FLAGS.max_predictions_per_seq,
is_training=False)

result = estimator.evaluate(
input_fn=eval_input_fn, steps=FLAGS.max_eval_steps)

output_eval_file = os.path.join(FLAGS.output_dir, "eval_results.txt")
with tf.gfile.GFile(output_eval_file, "w") as writer:
tf.logging.info("***** Eval results *****")
for key in sorted(result.keys()):
tf.logging.info(" %s = %s", key, str(result[key]))
writer.write("%s = %s\n" % (key, str(result[key])))
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
自定義模型
首先獲取數據內容，傳入到上一篇定義的模型中。對下一句預測任務取出模型的[CLS]結果。對遮蔽詞預測任務取出模型的最后結果。然后分別計算loss值，最后將loss值相加。詳情見注釋

def model_fn_builder(bert_config, init_checkpoint, learning_rate,
num_train_steps, num_warmup_steps, use_tpu,
use_one_hot_embeddings):
"""Returns `model_fn` closure for TPUEstimator."""

def model_fn(features, labels, mode, params): # pylint: disable=unused-argument
"""The `model_fn` for TPUEstimator."""

tf.logging.info("*** Features ***")
for name in sorted(features.keys()):
tf.logging.info(" name = %s, shape = %s" % (name, features[name].shape))
#獲取數據內容
input_ids = features["input_ids"]
input_mask = features["input_mask"]
segment_ids = features["segment_ids"]
masked_lm_positions = features["masked_lm_positions"]
masked_lm_ids = features["masked_lm_ids"]
masked_lm_weights = features["masked_lm_weights"]
next_sentence_labels = features["next_sentence_labels"]

is_training = (mode == tf.estimator.ModeKeys.TRAIN)
傳入到Bert模型中。
model = modeling.BertModel(
config=bert_config,
is_training=is_training,
input_ids=input_ids,
input_mask=input_mask,
token_type_ids=segment_ids,
use_one_hot_embeddings=use_one_hot_embeddings)
#遮蔽預測的batch_loss,平均loss，預測概率矩陣
(masked_lm_loss,
masked_lm_example_loss, masked_lm_log_probs) = get_masked_lm_output(
bert_config, model.get_sequence_output(), model.get_embedding_table(),
masked_lm_positions, masked_lm_ids, masked_lm_weights)
#下一句預測的batch_loss,平均loss，預測概率矩陣
(next_sentence_loss, next_sentence_example_loss,
next_sentence_log_probs) = get_next_sentence_output(
bert_config, model.get_pooled_output(), next_sentence_labels)
#loss相加
total_loss = masked_lm_loss + next_sentence_loss
#獲取所有變量
tvars = tf.trainable_variables()

initialized_variable_names = {}
scaffold_fn = None
#如果有之前保存的模型
if init_checkpoint:
(assignment_map, initialized_variable_names
) = modeling.get_assignment_map_from_checkpoint(tvars, init_checkpoint)
if use_tpu:

def tpu_scaffold():
tf.train.init_from_checkpoint(init_checkpoint, assignment_map)
return tf.train.Scaffold()

scaffold_fn = tpu_scaffold
else:
tf.train.init_from_checkpoint(init_checkpoint, assignment_map)

tf.logging.info("**** Trainable Variables ****")
#如果有之前保存的模型
for var in tvars:
init_string = ""
if var.name in initialized_variable_names:
init_string = ", *INIT_FROM_CKPT*"
tf.logging.info(" name = %s, shape = %s%s", var.name, var.shape,
init_string)

output_spec = None
if mode == tf.estimator.ModeKeys.TRAIN:
train_op = optimization.create_optimizer( #自定義好的優化器
total_loss, learning_rate, num_train_steps, num_warmup_steps, use_tpu)

output_spec = tf.contrib.tpu.TPUEstimatorSpec( #Estimator要求返回一個EstimatorSpec對象
mode=mode,
loss=total_loss,
train_op=train_op,
scaffold_fn=scaffold_fn)
#驗證過程
elif mode == tf.estimator.ModeKeys.EVAL:

def metric_fn(masked_lm_example_loss, masked_lm_log_probs, masked_lm_ids,
masked_lm_weights, next_sentence_example_loss,
next_sentence_log_probs, next_sentence_labels):
"""Computes the loss and accuracy of the model."""
masked_lm_log_probs = tf.reshape(masked_lm_log_probs,
[-1, masked_lm_log_probs.shape[-1]]) #概率矩陣轉成[batch_size*max_pred_pre_seq,vocab_size]
masked_lm_predictions = tf.argmax(
masked_lm_log_probs, axis=-1, output_type=tf.int32) #取最大值位置為輸出
masked_lm_example_loss = tf.reshape(masked_lm_example_loss, [-1]) #每句loss列表 [batch_size*max_pred_per_seq]
masked_lm_ids = tf.reshape(masked_lm_ids, [-1])
masked_lm_weights = tf.reshape(masked_lm_weights, [-1])
masked_lm_accuracy = tf.metrics.accuracy( #計算準確率
labels=masked_lm_ids,
predictions=masked_lm_predictions,
weights=masked_lm_weights)
masked_lm_mean_loss = tf.metrics.mean( #計算平均loss
values=masked_lm_example_loss, weights=masked_lm_weights)

next_sentence_log_probs = tf.reshape(
next_sentence_log_probs, [-1, next_sentence_log_probs.shape[-1]])
next_sentence_predictions = tf.argmax( #獲取最大位置為輸出
next_sentence_log_probs, axis=-1, output_type=tf.int32)
next_sentence_labels = tf.reshape(next_sentence_labels, [-1])
next_sentence_accuracy = tf.metrics.accuracy( #計算準確率
labels=next_sentence_labels, predictions=next_sentence_predictions)
next_sentence_mean_loss = tf.metrics.mean( 計算平均loss
values=next_sentence_example_loss)

return {
"masked_lm_accuracy": masked_lm_accuracy,
"masked_lm_loss": masked_lm_mean_loss,
"next_sentence_accuracy": next_sentence_accuracy,
"next_sentence_loss": next_sentence_mean_loss,
}

eval_metrics = (metric_fn, [
masked_lm_example_loss, masked_lm_log_probs, masked_lm_ids,
masked_lm_weights, next_sentence_example_loss,
next_sentence_log_probs, next_sentence_labels
])
output_spec = tf.contrib.tpu.TPUEstimatorSpec( #Estimator要求返回一個EstimatorSpec對象
mode=mode,
loss=total_loss,
eval_metrics=eval_metrics,
scaffold_fn=scaffold_fn)
else:
raise ValueError("Only TRAIN and EVAL modes are supported: %s" % (mode))

return output_spec

return model_fn
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
遮蔽詞預測
輸入BERT模型的最后一層encoder，輸出遮蔽詞預測任務的loss和概率矩陣。詳情見注釋

def get_masked_lm_output(bert_config, input_tensor, output_weights, positions,
label_ids, label_weights):
#這里的input_tensor是模型中傳回的最后一層結果 [batch_size,seq_length,hidden_size]。
#output_weights是詞向量表 [vocab_size,embedding_size]
"""Get loss and log probs for the masked LM."""
#獲取positions位置的所有encoder（即要預測的那些位置的encoder）
input_tensor = gather_indexes(input_tensor, positions) #[batch_size*max_pred_pre_seq,hidden_size]

with tf.variable_scope("cls/predictions"):
# We apply one more non-linear transformation before the output layer.
# This matrix is not used after pre-training.
with tf.variable_scope("transform"):
input_tensor = tf.layers.dense( #傳入一個全連接層 輸出shape [batch_size*max_pred_pre_seq,hidden_size]
input_tensor,
units=bert_config.hidden_size,
activation=modeling.get_activation(bert_config.hidden_act),
kernel_initializer=modeling.create_initializer(
bert_config.initializer_range))
input_tensor = modeling.layer_norm(input_tensor)

# The output weights are the same as the input embeddings, but there is
# an output-only bias for each token.
output_bias = tf.get_variable(
"output_bias",
shape=[bert_config.vocab_size],
initializer=tf.zeros_initializer())
logits = tf.matmul(input_tensor, output_weights, transpose_b=True) #[batch_size*max_pred_pre_seq,vocab_size]
logits = tf.nn.bias_add(logits, output_bias) #加bias
log_probs = tf.nn.log_softmax(logits, axis=-1) #[batch_size*max_pred_pre_seq,vocab_size]

label_ids = tf.reshape(label_ids, [-1]) #[batch_size*max_pred_per_seq]
label_weights = tf.reshape(label_weights, [-1])

one_hot_labels = tf.one_hot( #[batch_size*max_pred_per_seq,vocab_size]
label_ids, depth=bert_config.vocab_size, dtype=tf.float32) #label id轉one hot

# The `positions` tensor might be zero-padded (if the sequence is too
# short to have the maximum number of predictions). The `label_weights`
# tensor has a value of 1.0 for every real prediction and 0.0 for the
# padding predictions.
per_example_loss = -tf.reduce_sum(log_probs * one_hot_labels, axis=[-1]) #[batch_size*max_pred_per_seq]
numerator = tf.reduce_sum(label_weights * per_example_loss) #[1] 一個batch的loss
denominator = tf.reduce_sum(label_weights) + 1e-5
loss = numerator / denominator #平均loss

return (loss, per_example_loss, log_probs)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
下一句預測
輸入BERT模型CLS的encoder，輸出下一句預測任務的loss和概率矩陣,詳情見注釋

def get_next_sentence_output(bert_config, input_tensor, labels):
#input_tensor shape [batch_size,hidden_size]
"""Get loss and log probs for the next sentence prediction."""

# Simple binary classification. Note that 0 is "next sentence" and 1 is
# "random sentence". This weight matrix is not used after pre-training.
with tf.variable_scope("cls/seq_relationship"):
output_weights = tf.get_variable(
"output_weights",
shape=[2, bert_config.hidden_size],
initializer=modeling.create_initializer(bert_config.initializer_range))
output_bias = tf.get_variable(
"output_bias", shape=[2], initializer=tf.zeros_initializer()) #[batch_size,hidden_size]

logits = tf.matmul(input_tensor, output_weights, transpose_b=True) #[batch_size,2]
logits = tf.nn.bias_add(logits, output_bias) #[batch_size,2]
log_probs = tf.nn.log_softmax(logits, axis=-1)
labels = tf.reshape(labels, [-1])
one_hot_labels = tf.one_hot(labels, depth=2, dtype=tf.float32) #[batch_size,2]
per_example_loss = -tf.reduce_sum(one_hot_labels * log_probs, axis=-1) #[batch_size]
loss = tf.reduce_mean(per_example_loss) #[1]
return (loss, per_example_loss, log_probs)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
規范化數據集
Estimator要求模型的輸入為特定格式(from_tensor_slices)，所以要對數據進行類封裝

def input_fn_builder(input_files,
max_seq_length,
max_predictions_per_seq,
is_training,
num_cpu_threads=4):
"""Creates an `input_fn` closure to be passed to TPUEstimator."""

def input_fn(params):
"""The actual input function."""
batch_size = params["batch_size"]

name_to_features = {
"input_ids":
tf.FixedLenFeature([max_seq_length], tf.int64),
"input_mask":
tf.FixedLenFeature([max_seq_length], tf.int64),
"segment_ids":
tf.FixedLenFeature([max_seq_length], tf.int64),
"masked_lm_positions":
tf.FixedLenFeature([max_predictions_per_seq], tf.int64),
"masked_lm_ids":
tf.FixedLenFeature([max_predictions_per_seq], tf.int64),
"masked_lm_weights":
tf.FixedLenFeature([max_predictions_per_seq], tf.float32),
"next_sentence_labels":
tf.FixedLenFeature([1], tf.int64),
}

# For training, we want a lot of parallel reading and shuffling.
# For eval, we want no shuffling and parallel reading doesn't matter.
if is_training:
d = tf.data.Dataset.from_tensor_slices(tf.constant(input_files))
d = d.repeat() #重復
d = d.shuffle(buffer_size=len(input_files)) #打亂

# `cycle_length` is the number of parallel files that get read.
cycle_length = min(num_cpu_threads, len(input_files))

# `sloppy` mode means that the interleaving is not exact. This adds
# even more randomness to the training pipeline.
d = d.apply(
tf.contrib.data.parallel_interleave( #生成嵌套數據集，并且輸出其元素隔行交錯
tf.data.TFRecordDataset,
sloppy=is_training,
cycle_length=cycle_length))
d = d.shuffle(buffer_size=100)
else:
d = tf.data.TFRecordDataset(input_files)
# Since we evaluate for a fixed number of steps we don't want to encounter
# out-of-range exceptions.
d = d.repeat()

# We must `drop_remainder` on training because the TPU requires fixed
# size dimensions. For eval, we assume we are evaluating on the CPU or GPU
# and we *don't* want to drop the remainder, otherwise we wont cover
# every sample.
d = d.apply(
tf.contrib.data.map_and_batch( #結構轉換
lambda record: _decode_record(record, name_to_features),
batch_size=batch_size,
num_parallel_batches=num_cpu_threads,
drop_remainder=True))
return d

return input_fn
---------------------
作者：保持一份率性
來源：CSDN
原文：https://blog.csdn.net/weixin_39470744/article/details/84619903
版權聲明：本文為博主原創文章，轉載請附上博文鏈接！

總結

以上是生活随笔為你收集整理的谷歌BERT预训练源码解析（三）：训练过程的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。