CRTMPServer 在CentOS 64-bit下的編譯

http://blog.csdn.net/qiuchangyong/article/details/52848942

==========================================

一、Centos 用 wget 下載需要的軟件

wget?http://www.cmake.org/files/v2.8/cmake-2.8.6.tar.gz

二、安裝 cmake

tar zxvf cmake-2.8.4.tar.gz
cd cmake-2.8.6
./bootstrap
gmake
gmake install

這樣cmake就安裝好了

?

三、編譯crtmpserver

?

Here are the steps necessary for getting the server up and running. For installing the dependencies please consultthis.

check out the source code from svn repository:

$ svn co --username anonymous https://svn.rtmpd.com/crtmpserver/trunk crtmpserver

Hit Enter key when prompted for password (this parameter is empty)

我發現這個目前不能用了，所以通過之前下載好的源碼壓縮包來編譯的。

go to the builders directory

$ cd crtmpserver/builders/cmake

make sure everything is clean by doing

$ sh cleanup.sh

Note: This is necessary when updating the sources or you run into troubles like missing libraries reported by cmake

generate the makefile using cmake

$ cmake .

Notice the “space dot”

start the actual building process

$ make

At this point, if no errors occurred, you should have a working binary.

實際在編譯時，遇到的問題是：

?

這是依賴的lua庫編譯的問題，重新編譯lua庫，給src/Makefile的CFLAGS變量加上-fPIC再重新編譯即可。

四、運行服務器

?

?

If you are here from previous steps (compiling), you should already be in the right directory which isbuilders/cmake?relative to the directory where the sources are located. Enter the following command:

$ ./crtmpserver/crtmpserver ./crtmpserver/crtmpserver.lua 五、發布 將cmake目錄拷貝到發布的設備的/usr/local/bin/rtmpd下，同時將所有的*.so文件拷貝到cmake下，即可運行 ? 六、后臺運行 在后臺運行：$ ./crtmpserver/crtmpserver ./crtmpserver/crtmpserver.lua & ? 查詢后臺運行所有進程：$ ps -al 查詢后臺運行進程： ps -ef | grep crtmpserver 用kill -9 (你的進程號)就可以關掉了 本文參考http://blog.sina.com.cn/s/blog_8337d0c50100v61j.html整理而得。

總結

以上是生活随笔為你收集整理的CRTMPServer 在CentOS 64-bit下的编译(转)的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。