nginx环境下搭建nagios 3.5.0，及配置pnp4nagios画图
本文基于《LNMP最新源碼安裝腳本》,Nagios依賴PHP環境和perl環境，由于Nginx不支持Perl的CGI，需先來搭建Perl環境，Nagios原理介紹略。
一、下載最新穩定源碼包和Perl腳本
wget http://www.cpan.org/modules/by-module/FCGI/FCGI-0.74.tar.gz
wget http://www.cpan.org/authors/id/B/BO/BOBTFISH/FCGI-ProcManager-0.24.tar.gz
wget?http://blog.haohtml.com/wp-content/uploads/2011/08/perl-fcgi.zip
wget http://jaist.dl.sourceforge.net/project/nagios/nagios-3.x/nagios-3.5.0/nagios-3.5.0.tar.gz
wget http://nchc.dl.sourceforge.net/project/nagiosplug/nagiosplug/1.4.16/nagios-plugins-1.4.16.tar.gz
wget http://nchc.dl.sourceforge.net/project/nagios/nrpe-2.x/nrpe-2.14/nrpe-2.14.tar.gz
wget http://search.cpan.org/CPAN/authors/id/G/GB/GBARR/IO-1.25.tar.gz
wget http://search.cpan.org/CPAN/authors/id/I/IN/INGY/IO-All-0.41.tar.gz
wget http://jaist.dl.sourceforge.net/project/pnp4nagios/PNP-0.6/pnp4nagios-0.6.25.tar.gz
二、Nginx對Perl的CGI支持
Nginx支持Perl的CGI方法有好幾種，基本原理都是通過Perl的FCGI模塊實現，下面的方法就是其中一種：
安裝FCGI模塊
tar xzf FCGI-0.74.tar.gz
cd FCGI-0.74
perl Makefile.PL
make && make install
cd ../
安裝FCGI-ProcManager模塊
tar xzf FCGI-ProcManager-0.24.tar.gz
cd FCGI-ProcManager-0.24
perl Makefile.PL
make && make install
cd ../
安裝IO模塊
tar xvf IO-1.25.tar.gz
cd IO-1.25
perl Makefile.PL
make && make install
cd ..
安裝IO-All模塊
tar xvf IO-All-0.41.tar.gz
cd?IO-All-0.41
perl Makefile.PL
make && make install
啟動方法：
下載nginx-fcgi腳本
Wget http://www.nginx.eu/nginx-fcgi/nginx-fcgi.txt
#mv nginx-fcgi.txt /usr/sbin/nginx-fcgi
#chmod +x /usr/sbin/nginx-fcgi
mv nginx-fcgi.txt /usr/local/nginx/sbin/nginx-fcgi (我的nginx安裝位置)
chmod +x /usr/local/nginx/sbin/nginx-fcgi
如果不用 sudo 方式運行 nginx-fcgi，請注釋掉 nginx-fcgi 腳本中的：
if ( $> == "0" ) {
print "\n\tERROR\tRunning as a root!\n";
print "\tSuggested not to do so !!!\n\n";
exit 1;
}
啟動 nginx-fcgi：
/usr/local/nginx/sbin/nginx-fcgi -l /usr/local/nginx/logs/nginx-fcgi.log -pid /usr/local/nginx/logs/nginx-fcgi.pid -S /usr/local/nginx/logs/nginx-fcgi.sock
chown nginx:nginx /usr/local/nginx/logs/nginx-fcgi.sock
注意一定要為 socket 添加 nginx 帳戶的權限，否則 cgi 會執行失敗，頁面會報502錯誤
運行前使用cpan 安裝 FCGI; Getopt::Long; Socket;
設置開機啟動（添加到/etc/rc.loacl文件）
/bin/rm -rf /usr/local/nginx/logs/nginx-fcgi.pid
/usr/local/nginx/sbin/nginx-fcgi -l /usr/local/nginx/logs/nginx-fcgi.log -pid /usr/local/nginx/logs/nginx-fcgi.pid -S /usr/local/nginx/logs/nginx-fcgi.sock
chmod 777 /usr/local/nginx/logs/nginx-fcgi.sock
新建 nginx-fcgi 腳本指令配置，直接從 fastcgi_params 復制模板：
cp /etc/nginx/fastcgi_params /etc/nginx/nginx_fcgi_params
去除尾部的：
# PHP only, required if PHP was built with –enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;
新建示例 cgi 站點配置：
server {
listen 80;
server_name test.local;
location ~ ^/cgi-bin/.*\.cgi$
{
root /work/www/test;
fastcgi_index index.cgi;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include nginx_fcgi_params;
fastcgi_read_timeout 5m;
fastcgi_pass unix:/var/run/nginx-fcgi.sock;
}
}
重啟 nginx，cgi配置完成。
三、Nagios安裝(服務端)
useradd nagios
groupadd nagcmd
usermod -a -G nagcmd nagios
usermod -a -G nagcmd www
tar xzf nagios-3.5.0.tar.gz
cd nagios
yum -y install gd gd-devel
./configure --prefix=/usr/local/nagios --with-command-group=nagcmd --with-htmurl=/ --with-cgiurl=/cgi-bin
make all
make install #用于安裝主要的程序、CGI及HTML文件
make install-init #用于生成init啟動腳本
make install-config #用于安裝示例配置文件
make install-commandmode #用于設置相應的目錄權限
chkconfig --add nagios
chkconfig nagios on
cd ../
Nagios主程序只是提供一個運行框架，其具體監控是靠運行在其下的插件完成的，Nagios插件必須安裝
tar xzf nagios-plugins-1.4.16.tar.gz
cd nagios-plugins-1.4.16
./configure --prefix=/usr/local/nagios --with-nagios-user=nagios --with-nagios-group=nagios
make && make install
cd ../
配置Nagios Web界面登陸帳號及密碼
借用Apache的htpasswd命令工具
yum install httpd
service httpd stop && chkconfig httpd off #不啟用Apache
/usr/local/apache/bin/htpasswd -nb nagiosadmin 123456 > /usr/local/nagios/etc/htpasswd.users
生成加密文件
cat /usr/local/nagios/etc/htpasswd.users
nagiosadmin:wqx7mC26z5vKs
* 修改配置文件
打開 /usr/local/nagios/etc/cgi.cfg，修改 use_authentication 為：
use_authentication=0
即去除用戶驗證，然后重啟 nagios。
（否則會提示：It appears as though you do not have permission to view information for any of the hosts you requested... ，無法顯示host和service列表）
打開 /usr/local/nagios/share/config.inc.php，把：
$cfg['cgi_base_url']='/nagios/cgi-bin';
改為（根據自己的實際情況修改，可能不用改）：
$cfg['cgi_base_url']='/cgi-bin';
如果報錯：Error: No such CGI app - /usr/local/nagios/sbin/cgi-bin/status.cgi may not exist or is not executable by this process.
則一般都是這里的錯誤，此處修改的位置根據上面configure編譯nagios時定義–with-cgiurl=/cgi-bin修改，本人的這次安裝不知道哪里出問題，編譯nagios帶參數–with-cgiurl=/cgi-bin，此處卻必須為 $cfg['cgi_base_url']='/nagios/cgi-bin';不能修改，可能帶的參數編譯不成功
啟動前先檢查下配置文件是否正確
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
如果沒有報錯，可以啟動Nagios服務
/usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg
【或者/etc/init.d/nagios start】
查看nagios監控狀態
/usr/local/nagios/bin/nagiostats
四、配置pnp4nagios使nagios畫圖
1、首先安裝rrdtool等相關依賴環境
yum install -y pango pango-devel freetype freetype-devel libpng libpng-devel gettext gettext-devel libjpeg libjpeg-devel gd gd-devel libxml2 libxml2-devel libiconv libiconv-devel qpixman qpixman-devel glib glib-devel cairo cairo-devel libart*?ntp vim-enhanced gcc gcc-c++ gcc-g77 flex bisonautoconf automake bzip2-devel ncurses-devel zlib-devel libjpeg-devellibpng-devel libtiff-devel freetype-devel libXpm-devel gettext-devel pam-devel
yum install -y rrdtool perl-rrdtool rrdtool-devel
2、開始安裝pnp4nagios
tar xvf pnp4nagios-0.6.25.tar.gz
cd pnp4nagios-0.6.25
./configure --with-nagios-user=nagios --with-nagios-group=nagcmd
make all
make install
make install-webconf
make install-config
make install-init
3、創建配置文件
cd /usr/local/pnp4nagios/etc
mv misccommands.cfg-sample misccommands.cfg
mv nagios.cfg-sample nagios.cfg
mv npcd.cfg-sample npcd.cfg
mv process_perfdata.cfg-sample process_perfdata.cfg
mv rra.cfg-sample rra.cfg
cd pages
mv web_traffic.cfg-sample web_traffic.cfg
cd ../check_commands
mv check_all_local_disks.cfg-sample check_all_local_disks.cfg
mv check_nrpe.cfg-sample check_nrpe.cfg
mv check_nwstat.cfg-sample check_nwstat.cfg
4、重啟npcd服務
/etc/init.d/npcd restart
5、修改 nagios 的配置文件.打開performance_data
vim /usr/local/nagios/etc/nagios.cfg
以下三項有注釋則去掉，并按以下修改
process_performance_data=1
host_perfdata_command=process-host-perfdata
service_perfdata_command=process-service-perfdata
6、修改commands.cfg，添加新的"process-host-perfdata"和"process-service-perfdata"，如果原有定義，則注釋掉原定義
vim /usr/local/nagios/etc/objects/commands.cfg
# 'process-host-perfdata' command definition
define command{
command_name ?process-host-perfdata
command_line /usr/local/pnp4nagios/libexec/process_perfdata.pl -d HOSTPERFDATA
}
# 'process-service-perfdata' command definition
define command{
command_name process-service-perfdata
command_line ?/usr/local/pnp4nagios/libexec/process_perfdata.pl
}
7、添加小太陽模版，鑲嵌在nagios頁面上
vim /usr/local/nagios/etc/objects/templates.cfg
define host {
name hosts-pnp
action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=_HOST_
register ?0
}
define service {
name services-pnp
action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=$SERVICEDESC$
register ?0
}
8、修改 hosts.cfg和services.cfg，添加hosts-pnp和services-pnp
vim /usr/local/nagios/etc/objects/hosts.cfg
define host{
use linux-server,hosts-pnp
host_name 123.206.34.2
alias 123.206.34.2
address ?123.206.34.2
}
vim /usr/local/nagios/etc/objects/services.cfg
define service {
use generic-service,services-pnp
host_name 123.206.34.2
service_description Disk / Partition
check_command ?check_nrpe!check_disk!15%!10%!/
}
9、重啟nagios服務
/etc/init.d/nagios restart
四、nginx配置文件
vim /usr/local/nginx/conf/vhost/nginx.conf
server
{
listen 80;
server_name nagios.test.com;
root /usr/local/nagios/share;
index index.php index.html index.htm;
charset utf-8;
expires 2h;
location ~ .*\\.(php|php5)?$
{
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
auth_basic "Nagios Login";
auth_basic_user_file /usr/local/nagios/etc/htpasswd.users;
}
location ~ .*\\.cgi$ {
root /usr/local/nagios/sbin;
rewrite ^/nagios/cgi-bin/(.*)\\.cgi /$1.cgi break;
#rewrite ^/nagios/(.*)\\.cgi /$1.cgi break;
fastcgi_pass unix:/usr/local/nginx/logs/nginx-fcgi.sock;
fastcgi_index index.cgi;
#fastcgi_param SCRIPT_FILENAME /usr/local/nagios/sbin/$fastcgi_script_name;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param HTTP_ACCEPT_LANGUAGE zh-cn;
include fcgi.conf;
auth_basic "Nagios Login";
auth_basic_user_file /usr/local/nagios/etc/htpasswd.users;
}
location /nagios/ {
alias /usr/local/nagios/share/;
}
##如果沒有配置pnp4nagios畫圖，以下兩段location則不用配置
##在nagios監控頁面點擊小太陽圖標時如果顯示404找不到rrd圖片文件，則需要注意以下配置是否正確無誤
location /pnp4nagios {
alias /usr/local/pnp4nagios/share;
index index.php;
try_files $uri $uri/ @pnp4nagios;
}
location @pnp4nagios {
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fastcgi_params;
fastcgi_split_path_info ^(.+\.php)(.*)$;
fastcgi_param PATH_INFO $fastcgi_path_info;
fastcgi_param SCRIPT_FILENAME /usr/local/pnp4nagios/share/index.php;
}
}
?
vim /usr/local/nginx/conf/fcgi.conf
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
#fastcgi_param REDIRECT_STATUS 200;
或者
（nginx + php-fpm頁面顯示空白的問題http://blog.sina.com.cn/s/blog_67d781d20101nhy0.html）
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REMOTE_USER $remote_user;
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx/$nginx_version;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;
?
附加參考：
http://cwtea.blog.51cto.com/4500217/1278745/
http://blog.csdn.net/remote_roamer/article/details/49414173
?
轉載于:https://www.cnblogs.com/fjping0606/p/4428977.html
總結
以上是生活随笔為你收集整理的nginx环境下搭建nagios 3.5.0，及配置pnp4nagios画图的全部內容，希望文章能夠幫你解決所遇到的問題。
- 上一篇： 怀不上孕为什么
- 下一篇： 20135127陶俊杰 实验一