在虛擬機上yuv420可以正常顯示 ，而945（D525）模塊上卻無法顯示 ，后來驗證了directdraw的yuv420也無法顯示 ，由此懷疑顯卡不支持 ，后把420轉換為422顯示。

420顯示如下：

/* 編譯命令：arm-linux-gcc -o show2642 264showyuv2.c -I/usr/local/ffmpeg_arm/include/ -L/usr/local/ffmpeg_arm/lib/ -lswresample -lavformat -lavutil -lavcodec -lswscale -lx264 libSDL.agcc -o test test.c -I/usr/local/ffmpeg/include/ -L/usr/local/ffmpeg/lib/ -lswresample -lavformat -lavutil -lavcodec -lswscale -lx264 -lSDL */ #include "stdio.h" #include "stdlib.h"#include "libavformat/avformat.h" #include "libavdevice/avdevice.h" #include "libswresample/swresample.h" #include "libavutil/opt.h" #include "libavutil/channel_layout.h" #include "libavutil/parseutils.h" #include "libavutil/samplefmt.h" #include "libavutil/fifo.h" #include "libavutil/intreadwrite.h" #include "libavutil/dict.h" #include "libavutil/mathematics.h" #include "libavutil/pixdesc.h" #include "libavutil/avstring.h" #include "libavutil/imgutils.h" #include "libavutil/timestamp.h" #include "libavutil/bprint.h" #include "libavutil/time.h" #include "libavutil/threadmessage.h" #include "SDL/SDL.h"//#include "libavfilter/avcodec.h" #include "libavcodec/avcodec.h"#if HAVE_SYS_RESOURCE_H #include <sys/time.h> #include <sys/types.h> #include <sys/resource.h> #elif HAVE_GETPROCESSTIMES #include <windows.h> #endif #if HAVE_GETPROCESSMEMORYINFO #include <windows.h> #include <psapi.h> #endif#if HAVE_SYS_SELECT_H #include <sys/select.h> #endif#if HAVE_TERMIOS_H #include <fcntl.h> #include <sys/ioctl.h> #include <sys/time.h> #include <termios.h> #elif HAVE_KBHIT #include <conio.h> #endif#if HAVE_PTHREADS #include <pthread.h> #endif#include <time.h>#include "libavutil/avassert.h"#define MAX_LEN 1024 * 50此方法參考官網的例子 static void pgm_save(unsigned char *buf, int wrap, int xsize, int ysize,FILE *f) {// FILE *f;int i;// f = fopen(filename,"w");// fprintf(f, "P5\n%d %d\n%d\n", xsize, ysize, 255);for (i = 0; i < ysize; i++);// fwrite(buf + i * wrap, 1, xsize, f);// fclose(f); }int main() {//下面初始化h264解碼庫//avcodec_init();int w = 720;int h = 576,retu;SDL_Rect rect;av_register_all();AVFrame *pFrame_ = NULL;/* find the video encoder */AVCodec *videoCodec = avcodec_find_decoder(AV_CODEC_ID_H264);//得到264的解碼器類if(!videoCodec){printf("avcodec_find_decoder error\n");return -1;}AVCodecParserContext *avParserContext = av_parser_init(AV_CODEC_ID_H264);//得到解析幀類，主要用于后面的幀頭查找if(!avParserContext){printf("av_parser_init error\n");return -1;}AVCodecContext *codec_ = avcodec_alloc_context3(videoCodec);//解碼會話層if(!codec_){printf("avcodec_alloc_context3 error\n");return -1;}//初始化參數，下面的參數應該由具體的業務決定codec_->time_base.num = 1;codec_->frame_number = 1; //每包一個視頻幀codec_->codec_type = AVMEDIA_TYPE_VIDEO;codec_->bit_rate = 0;codec_->time_base.den = 25;//幀率codec_->width = 720;//視頻寬codec_->height = 576;//視頻高if(avcodec_open2(codec_, videoCodec, NULL) >= 0)//打開解碼器{pFrame_ = av_frame_alloc();// Allocate video frame 成功打開解碼器后， 此時可以分配幀內存， 當然你也可以在后面每次都分配、釋放， 在此我省功夫， 只在開始分配一次if (!pFrame_) {fprintf(stderr, "Could not allocate video frame\n");exit(1);}}else{printf("avcodec_open2 error\n");return -1;}AVPacket packet = {0};int dwBufsize = 10;int frameFinished = dwBufsize;//這個是隨便填入數字，沒什么作用av_init_packet(&packet);packet.data = NULL;//這里填入一個指向完整H264數據幀的指針packet.size = 0;//這個填入H264數據幀的大小FILE *myH264 = fopen("1.264", "rb");//解碼的文件264if(myH264 == NULL){perror("cant open 264 file\n");return -1;}FILE *yuvfile = fopen("my264.yuv", "wb");//成功解碼后保存成的YUV文件， 可以用YUV工具打開瀏覽if(yuvfile == NULL){perror("cant open YUV file\n");return -1;}int readFileLen = 1;char readBuf[MAX_LEN];unsigned char *parseBuf = malloc(20*MAX_LEN);//這個地方浪費了我一個下午時間， 當時我用的是棧內存，即unsigned char parseBuf[20*MAX_LEN]， 結果運行程序一直報錯， 此處需要用堆內存才能正常解碼int parseBufLen = 0;int frameCount = 0;printf("begin...\n");printf("readBuf address is %x\n", readBuf); /SDL initSDL_Surface* hello = NULL;SDL_Surface* screen = NULL;//Start SDL// SDL_Init( SDL_INIT_EVERYTHING );SDL_Init(SDL_INIT_VIDEO);//Set up screenscreen = SDL_SetVideoMode( 1024, 768, 32, SDL_SWSURFACE );SDL_Overlay* overlay = SDL_CreateYUVOverlay(w, h, SDL_YV12_OVERLAY, screen);SDL_LockSurface(screen);SDL_LockYUVOverlay(overlay); //while(readFileLen > 0)//開始解碼工作{//printf("begin...\n");readFileLen = fread(readBuf, 1, sizeof(readBuf), myH264);//首先從文件里讀出數據if(readFileLen <= 0){printf("read over\n");break;}else{int handleLen = 0;int handleFileLen = readFileLen;while(handleFileLen > 0){int nLength = av_parser_parse2(avParserContext, codec_, &parseBuf, &parseBufLen, readBuf + handleLen, handleFileLen, 0, 0, 0);//查找264幀頭handleFileLen -= nLength;handleLen += nLength;if(parseBufLen <= 0)//當parseBufLen大于0時，說明查找到了幀頭{continue;}packet.size = parseBufLen;//將查找到的幀長度送入packet.data = parseBuf;//將查找到的幀內存送入if(frameCount>100)break;//printf("parseBuf address is %x\n", parseBuf);while(packet.size > 0){//下面開始真正的解碼int decodeLen = avcodec_decode_video2(codec_, pFrame_, &frameFinished, &packet);if(decodeLen < 0)break;packet.size -= decodeLen;packet.data += decodeLen;if(frameFinished > 0)//成功解碼{int picSize = codec_->height * codec_->width;//int newSize = picSize * 1.5;//申請內存//unsigned char *buf = malloc(newSize);int height = pFrame_->height;int width = pFrame_->width;//printf("OK, get data\n");//printf("Frame height is %d\n", height);//printf("Frame width is %d\n", width);frameCount ++;printf("Frame count is %d\n", frameCount);pgm_save(pFrame_->data[0], pFrame_->linesize[0],//保存Ycodec_->width, codec_->height, yuvfile);pgm_save(pFrame_->data[1], pFrame_->linesize[1],//保存Ucodec_->width/2, codec_->height/2, yuvfile);pgm_save(pFrame_->data[2], pFrame_->linesize[2],//保存Vcodec_->width/2, codec_->height/2, yuvfile);///有了YUV數據， 后面可以用FFMPEG提供的轉換方法，將其轉成RGB數據，進行后續的顯示或其它的圖像處理工作sdlint i;for(i=0;i<576;i++){//fwrite(buf + i * wrap, 1, xsize, f);memcpy(overlay->pixels[0]+i*1280, pFrame_->data[0]+i*pFrame_->linesize[0], 720); }for(i=0;i<288;i++){memcpy(overlay->pixels[2]+i*640, pFrame_->data[1]+i*pFrame_->linesize[1], 360);memcpy(overlay->pixels[1]+i*640, pFrame_->data[2]+i*pFrame_->linesize[2], 360); }SDL_UnlockYUVOverlay(overlay);SDL_UnlockSurface(screen);rect.w = w;rect.h = h;rect.x = rect.y = 0;SDL_DisplayYUVOverlay(overlay, &rect);//sdlSDL_Delay(40);}elseprintf("failed to decodec\n");}}}}//釋放工作avcodec_close(codec_);av_free(codec_);av_free_packet(&packet);av_frame_free(&pFrame_);//SDLSDL_FreeYUVOverlay(overlay);SDL_FreeSurface(screen);//Quit SDLSDL_Quit();fclose(yuvfile);fclose(myH264);}

422顯示如下：

/* 編譯命令：arm-linux-gcc -o show2642 264showyuv2.c -I/usr/local/ffmpeg_arm/include/ -L/usr/local/ffmpeg_arm/lib/ -lswresample -lavformat -lavutil -lavcodec -lswscale -lx264 libSDL.agcc -o test test.c -I/usr/local/ffmpeg/include/ -L/usr/local/ffmpeg/lib/ -lswresample -lavformat -lavutil -lavcodec -lswscale -lx264 -lSDL */ #include "stdio.h" #include "stdlib.h"#include "libavformat/avformat.h" #include "libavdevice/avdevice.h" #include "libswresample/swresample.h" #include "libavutil/opt.h" #include "libavutil/channel_layout.h" #include "libavutil/parseutils.h" #include "libavutil/samplefmt.h" #include "libavutil/fifo.h" #include "libavutil/intreadwrite.h" #include "libavutil/dict.h" #include "libavutil/mathematics.h" #include "libavutil/pixdesc.h" #include "libavutil/avstring.h" #include "libavutil/imgutils.h" #include "libavutil/timestamp.h" #include "libavutil/bprint.h" #include "libavutil/time.h" #include "libavutil/threadmessage.h" #include "SDL/SDL.h"//#include "libavfilter/avcodec.h" #include "libavcodec/avcodec.h"#if HAVE_SYS_RESOURCE_H #include <sys/time.h> #include <sys/types.h> #include <sys/resource.h> #elif HAVE_GETPROCESSTIMES #include <windows.h> #endif #if HAVE_GETPROCESSMEMORYINFO #include <windows.h> #include <psapi.h> #endif#if HAVE_SYS_SELECT_H #include <sys/select.h> #endif#if HAVE_TERMIOS_H #include <fcntl.h> #include <sys/ioctl.h> #include <sys/time.h> #include <termios.h> #elif HAVE_KBHIT #include <conio.h> #endif#if HAVE_PTHREADS #include <pthread.h> #endif#include <time.h>#include "libavutil/avassert.h"#define MAX_LEN 1024 * 50此方法參考官網的例子此方法參考官網的例子 static void pgm_save(unsigned char *buf, int wrap, int xsize, int ysize,FILE *f) {// FILE *f;int i;// f = fopen(filename,"w");// fprintf(f, "P5\n%d %d\n%d\n", xsize, ysize, 255);for (i = 0; i < ysize; i++);// fwrite(buf + i * wrap, 1, xsize, f);// fclose(f); }int main() {//下面初始化h264解碼庫//avcodec_init();int w = 720;int h = 576,retu;SDL_Rect rect;av_register_all();AVFrame *pFrame_ = NULL;/* find the video encoder */AVCodec *videoCodec = avcodec_find_decoder(AV_CODEC_ID_H264);//得到264的解碼器類if(!videoCodec){printf("avcodec_find_decoder error\n");return -1;}AVCodecParserContext *avParserContext = av_parser_init(AV_CODEC_ID_H264);//得到解析幀類，主要用于后面的幀頭查找if(!avParserContext){printf("av_parser_init error\n");return -1;}AVCodecContext *codec_ = avcodec_alloc_context3(videoCodec);//解碼會話層if(!codec_){printf("avcodec_alloc_context3 error\n");return -1;}//初始化參數，下面的參數應該由具體的業務決定codec_->time_base.num = 1;codec_->frame_number = 1; //每包一個視頻幀codec_->codec_type = AVMEDIA_TYPE_VIDEO;codec_->bit_rate = 0;codec_->time_base.den = 25;//幀率codec_->width = 720;//視頻寬codec_->height = 576;//視頻高if(avcodec_open2(codec_, videoCodec, NULL) >= 0)//打開解碼器{pFrame_ = av_frame_alloc();// Allocate video frame 成功打開解碼器后， 此時可以分配幀內存， 當然你也可以在后面每次都分配、釋放， 在此我省功夫， 只在開始分配一次if (!pFrame_) {fprintf(stderr, "Could not allocate video frame\n");exit(1);}}else{printf("avcodec_open2 error\n");return -1;}AVPacket packet = {0};int dwBufsize = 10;int frameFinished = dwBufsize;//這個是隨便填入數字，沒什么作用av_init_packet(&packet);packet.data = NULL;//這里填入一個指向完整H264數據幀的指針packet.size = 0;//這個填入H264數據幀的大小FILE *myH264 = fopen("1.264", "rb");//解碼的文件264if(myH264 == NULL){perror("cant open 264 file\n");return -1;}FILE *yuvfile = fopen("my264.yuv", "wb");//成功解碼后保存成的YUV文件， 可以用YUV工具打開瀏覽if(yuvfile == NULL){perror("cant open YUV file\n");return -1;}int readFileLen = 1;char readBuf[MAX_LEN];unsigned char *parseBuf = malloc(20*MAX_LEN);//這個地方浪費了我一個下午時間， 當時我用的是棧內存，即unsigned char parseBuf[20*MAX_LEN]， 結果運行程序一直報錯， 此處需要用堆內存才能正常解碼int parseBufLen = 0;int frameCount = 0;printf("begin...\n");printf("readBuf address is %x\n", readBuf); /SDL initSDL_Surface* hello = NULL;SDL_Surface* screen = NULL;//Start SDL// SDL_Init( SDL_INIT_EVERYTHING );SDL_Init(SDL_INIT_VIDEO);//Set up screenscreen = SDL_SetVideoMode( 720, 576, 32, SDL_SWSURFACE );SDL_Overlay* overlay = SDL_CreateYUVOverlay(w, h, SDL_YUY2_OVERLAY, screen);SDL_LockSurface(screen);SDL_LockYUVOverlay(overlay); unsigned char yuv422[768*576*2]; //while(readFileLen > 0)//開始解碼工作{//printf("begin...\n");readFileLen = fread(readBuf, 1, sizeof(readBuf), myH264);//首先從文件里讀出數據if(readFileLen <= 0){printf("read over\n");break;}else{int handleLen = 0;int handleFileLen = readFileLen;while(handleFileLen > 0){int nLength = av_parser_parse2(avParserContext, codec_, &parseBuf, &parseBufLen, readBuf + handleLen, handleFileLen, 0, 0, 0);//查找264幀頭handleFileLen -= nLength;handleLen += nLength;if(parseBufLen <= 0)//當parseBufLen大于0時，說明查找到了幀頭{continue;}packet.size = parseBufLen;//將查找到的幀長度送入packet.data = parseBuf;//將查找到的幀內存送入if(frameCount>100)break;//printf("parseBuf address is %x\n", parseBuf);while(packet.size > 0){//下面開始真正的解碼int decodeLen = avcodec_decode_video2(codec_, pFrame_, &frameFinished, &packet);//if(decodeLen < 0)break;packet.size -= decodeLen;packet.data += decodeLen;if(frameFinished > 0)//成功解碼{int picSize = codec_->height * codec_->width;//int newSize = picSize * 1.5;//申請內存//unsigned char *buf = malloc(newSize);int height = pFrame_->height;int width = pFrame_->width;//printf("OK, get data\n");//printf("Frame height is %d\n", height);//printf("Frame width is %d\n", width);frameCount ++;printf("Frame count is %d\n", frameCount);pgm_save(pFrame_->data[0], pFrame_->linesize[0],//保存Ycodec_->width, codec_->height, yuvfile);pgm_save(pFrame_->data[1], pFrame_->linesize[1],//保存Ucodec_->width/2, codec_->height/2, yuvfile);pgm_save(pFrame_->data[2], pFrame_->linesize[2],//保存Vcodec_->width/2, codec_->height/2, yuvfile);///有了YUV數據， 后面可以用FFMPEG提供的轉換方法，將其轉成RGB數據，進行后續的顯示或其它的圖像處理工作sdlint i;/* for(i=0;i<576;i++){//fwrite(buf + i * wrap, 1, xsize, f);memcpy(overlay->pixels[0]+i*720, pFrame_->data[0]+i*pFrame_->linesize[0], 720); }for(i=0;i<288;i++){memcpy(overlay->pixels[2]+i*360, pFrame_->data[1]+i*pFrame_->linesize[1], 360);memcpy(overlay->pixels[1]+i*360, pFrame_->data[2]+i*pFrame_->linesize[2], 360); }*/int k=0,y,x; //yuv420 -> yuv422for( y=0;y<576;y++){for( x=0;x<720;x++){yuv422[k++] = pFrame_->data[0][y*pFrame_->linesize[0]+x];yuv422[k++] = x%2==0?pFrame_->data[1][(y/2)*pFrame_->linesize[1]+x/2]:pFrame_->data[2][(y/2)*pFrame_->linesize[2]+x/2];}}memcpy(overlay->pixels[0],yuv422, codec_->width*codec_->height*2);SDL_UnlockYUVOverlay(overlay);SDL_UnlockSurface(screen);rect.w = w;rect.h = h;rect.x = rect.y = 0;SDL_DisplayYUVOverlay(overlay, &rect);//sdlSDL_Delay(40);}elseprintf("failed to decodec\n");}}}}//釋放工作avcodec_close(codec_);av_free(codec_);av_free_packet(&packet);av_frame_free(&pFrame_);//SDLSDL_FreeYUVOverlay(overlay);SDL_FreeSurface(screen);//Quit SDLSDL_Quit();fclose(yuvfile);fclose(myH264);}

采用sws_scale 實現的數據轉換

/* 編譯命令：arm-linux-gcc -o show2642 264showyuv2.c -I/usr/local/ffmpeg_arm/include/ -L/usr/local/ffmpeg_arm/lib/ -lswresample -lavformat -lavutil -lavcodec -lswscale -lx264 libSDL.agcc -o test test.c -I/usr/local/ffmpeg/include/ -L/usr/local/ffmpeg/lib/ -lswresample -lavformat -lavutil -lavcodec -lswscale -lx264 -lSDL */ #include "stdio.h" #include "stdlib.h"#include "libavformat/avformat.h" #include "libavdevice/avdevice.h" #include "libswresample/swresample.h" #include "libavutil/opt.h" #include "libavutil/channel_layout.h" #include "libavutil/parseutils.h" #include "libavutil/samplefmt.h" #include "libavutil/fifo.h" #include "libavutil/intreadwrite.h" #include "libavutil/dict.h" #include "libavutil/mathematics.h" #include "libavutil/pixdesc.h" #include "libavutil/avstring.h" #include "libavutil/imgutils.h" #include "libavutil/timestamp.h" #include "libavutil/bprint.h" #include "libavutil/time.h" #include "libavutil/threadmessage.h" #include "SDL/SDL.h"//#include "libavfilter/avcodec.h" #include "libavcodec/avcodec.h"#if HAVE_SYS_RESOURCE_H #include <sys/time.h> #include <sys/types.h> #include <sys/resource.h> #elif HAVE_GETPROCESSTIMES #include <windows.h> #endif #if HAVE_GETPROCESSMEMORYINFO #include <windows.h> #include <psapi.h> #endif#if HAVE_SYS_SELECT_H #include <sys/select.h> #endif#if HAVE_TERMIOS_H #include <fcntl.h> #include <sys/ioctl.h> #include <sys/time.h> #include <termios.h> #elif HAVE_KBHIT #include <conio.h> #endif#if HAVE_PTHREADS #include <pthread.h> #endif#include <time.h>#include "libavutil/avassert.h"#define MAX_LEN 1024 * 50此方法參考官網的例子 static void pgm_save(unsigned char *buf, int wrap, int xsize, int ysize,FILE *f) {// FILE *f;int i;// f = fopen(filename,"w");// fprintf(f, "P5\n%d %d\n%d\n", xsize, ysize, 255);for (i = 0; i < ysize; i++);// fwrite(buf + i * wrap, 1, xsize, f);// fclose(f); }int main() {//下面初始化h264解碼庫//avcodec_init();int w = 720;int h = 576,retu;SDL_Rect rect;av_register_all();AVFrame *pFrame_ = NULL,*pFrameYUV;struct SwsContext *img_convert_ctx =NULL;pFrameYUV =av_frame_alloc();/* find the video encoder */AVCodec *videoCodec = avcodec_find_decoder(AV_CODEC_ID_H264);//得到264的解碼器類if(!videoCodec){printf("avcodec_find_decoder error\n");return -1;}AVCodecParserContext *avParserContext = av_parser_init(AV_CODEC_ID_H264);//得到解析幀類，主要用于后面的幀頭查找if(!avParserContext){printf("av_parser_init error\n");return -1;}AVCodecContext *codec_ = avcodec_alloc_context3(videoCodec);//解碼會話層if(!codec_){printf("avcodec_alloc_context3 error\n");return -1;}//初始化參數，下面的參數應該由具體的業務決定codec_->time_base.num = 1;codec_->frame_number = 1; //每包一個視頻幀codec_->codec_type = AVMEDIA_TYPE_VIDEO;codec_->bit_rate = 0;codec_->time_base.den = 25;//幀率codec_->width = 720;//視頻寬codec_->height = 576;//視頻高if(avcodec_open2(codec_, videoCodec, NULL) >= 0)//打開解碼器{pFrame_ = av_frame_alloc();// Allocate video frame 成功打開解碼器后， 此時可以分配幀內存， 當然你也可以在后面每次都分配、釋放， 在此我省功夫， 只在開始分配一次if (!pFrame_) {fprintf(stderr, "Could not allocate video frame\n");exit(1);}}else{printf("avcodec_open2 error\n");return -1;}AVPacket packet = {0};int dwBufsize = 10;int frameFinished = dwBufsize;//這個是隨便填入數字，沒什么作用av_init_packet(&packet);packet.data = NULL;//這里填入一個指向完整H264數據幀的指針packet.size = 0;//這個填入H264數據幀的大小FILE *myH264 = fopen("1.264", "rb");//解碼的文件264if(myH264 == NULL){perror("cant open 264 file\n");return -1;}FILE *yuvfile = fopen("my264.yuv", "wb");//成功解碼后保存成的YUV文件， 可以用YUV工具打開瀏覽if(yuvfile == NULL){perror("cant open YUV file\n");return -1;}int readFileLen = 1;char readBuf[MAX_LEN];unsigned char *parseBuf = malloc(20*MAX_LEN);//這個地方浪費了我一個下午時間， 當時我用的是棧內存，即unsigned char parseBuf[20*MAX_LEN]， 結果運行程序一直報錯， 此處需要用堆內存才能正常解碼int parseBufLen = 0;int frameCount = 0;printf("begin...\n");printf("readBuf address is %x\n", readBuf); /SDL initSDL_Surface* hello = NULL;SDL_Surface* screen = NULL;//Start SDL// SDL_Init( SDL_INIT_EVERYTHING );SDL_Init(SDL_INIT_VIDEO);//Set up screenscreen = SDL_SetVideoMode( 720, 576, 32, SDL_SWSURFACE );SDL_Overlay* overlay = SDL_CreateYUVOverlay(w, h, SDL_YUY2_OVERLAY, screen);SDL_LockSurface(screen);SDL_LockYUVOverlay(overlay); // //int numBytes = avpicture_get_size(AV_PIX_FMT_YUYV422, codec_->width, codec_->height); uint8_t* yuv422 = (uint8_t *)av_malloc(numBytes*sizeof(uint8_t)); avpicture_fill((AVPicture *)pFrameYUV, yuv422, AV_PIX_FMT_YUYV422, codec_->width, codec_->height); ///while(readFileLen > 0)//開始解碼工作{//printf("begin...\n");readFileLen = fread(readBuf, 1, sizeof(readBuf), myH264);//首先從文件里讀出數據if(readFileLen <= 0){printf("read over\n");break;}else{int handleLen = 0;int handleFileLen = readFileLen;while(handleFileLen > 0){int nLength = av_parser_parse2(avParserContext, codec_, &parseBuf, &parseBufLen, readBuf + handleLen, handleFileLen, 0, 0, 0);//查找264幀頭handleFileLen -= nLength;handleLen += nLength;if(parseBufLen <= 0)//當parseBufLen大于0時，說明查找到了幀頭{continue;}packet.size = parseBufLen;//將查找到的幀長度送入packet.data = parseBuf;//將查找到的幀內存送入if(frameCount>100)break;//printf("parseBuf address is %x\n", parseBuf);while(packet.size > 0){//下面開始真正的解碼int decodeLen = avcodec_decode_video2(codec_, pFrame_, &frameFinished, &packet);if(decodeLen < 0)break;packet.size -= decodeLen;packet.data += decodeLen;if(frameFinished > 0)//成功解碼{int picSize = codec_->height * codec_->width;//int newSize = picSize * 1.5;//申請內存//unsigned char *buf = malloc(newSize);int height = pFrame_->height;int width = pFrame_->width;//printf("OK, get data\n");//printf("Frame height is %d\n", height);//printf("Frame width is %d\n", width);frameCount ++;printf("Frame count is %d\n", frameCount);pgm_save(pFrame_->data[0], pFrame_->linesize[0],//保存Ycodec_->width, codec_->height, yuvfile);pgm_save(pFrame_->data[1], pFrame_->linesize[1],//保存Ucodec_->width/2, codec_->height/2, yuvfile);pgm_save(pFrame_->data[2], pFrame_->linesize[2],//保存Vcodec_->width/2, codec_->height/2, yuvfile);///有了YUV數據， 后面可以用FFMPEG提供的轉換方法，將其轉成RGB數據，進行后續的顯示或其它的圖像處理工作sdlint i;/* for(i=0;i<576;i++){//fwrite(buf + i * wrap, 1, xsize, f);memcpy(overlay->pixels[0]+i*720, pFrame_->data[0]+i*pFrame_->linesize[0], 720); }for(i=0;i<288;i++){memcpy(overlay->pixels[2]+i*360, pFrame_->data[1]+i*pFrame_->linesize[1], 360);memcpy(overlay->pixels[1]+i*360, pFrame_->data[2]+i*pFrame_->linesize[2], 360); }*/img_convert_ctx = sws_getContext(codec_->width, codec_->height, codec_->pix_fmt, codec_->width, codec_->height, AV_PIX_FMT_YUYV422, 2, NULL, NULL, NULL); sws_scale(img_convert_ctx, (const uint8_t* const*) pFrame_->data, pFrame_->linesize, 0, codec_->height, pFrameYUV->data,pFrameYUV->linesize); memcpy(overlay->pixels[0],yuv422, codec_->width*codec_->height*2);SDL_UnlockYUVOverlay(overlay);SDL_UnlockSurface(screen);rect.w = w;rect.h = h;rect.x = rect.y = 0;SDL_DisplayYUVOverlay(overlay, &rect);//sdlSDL_Delay(40);}elseprintf("failed to decodec\n");}}}}//釋放工作avcodec_close(codec_);av_free(codec_);av_free_packet(&packet);av_frame_free(&pFrame_);//SDLSDL_FreeYUVOverlay(overlay);SDL_FreeSurface(screen);//Quit SDLSDL_Quit();fclose(yuvfile);fclose(myH264);}

轉載于:https://www.cnblogs.com/mao0504/p/5589743.html

總結

以上是生活随笔為你收集整理的linux之x86裁剪移植---ffmpeg的H264解码显示（420、422）的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。