最近比較忙，比較煩，不想說話，想打人，想發脾氣了；

這幾天比較累，相當的累，這兩個星期什么都不順心，心情也很低落

這兩個星期維護的移動、廣電網絡都出現問題了，o(︶︿︶)o 唉；

最煩的是廣電的，我們公司好幾百人都不會，沒有人玩這個，這個咋辦哦，崩潰呀！

唉，靠天、靠地、還不如靠自己；自己研究吧！經過一個星期的研究，最終成正果了；

下面是我的操作記錄，分享給大家：

一、安裝環境準備

到cisco官網下載下面問題，需要有coo帳號：

scms-cm-v355-b182-bundle-linux-tar.part1
scms-cm-v355-b182-bundle-linux-tar.part2
scms-cm-v355-b182-bundle-linux-tar.part3
scms-cm-v355-b182-bundle-linux-tar.part4
scms-cm-v355-b182-bundle-linux-tar.part5

?

此時可使用下面命令檢查vsftpd和compat-libstdc++是否安裝正確

[root@localhost share]# rpm -q -a |grep vsftpd
vsftpd-2.0.1-8.el4
[root@localhost share]# rpm -q -a |grep compat
compat-dapl-2.0.15-1.el4
compat-libstdc++-33-3.2.3-47.3
compat-libgcc-296-2.96-132.7.2
compat-libcom_err-1.0-5
compat-db-4.1.25-9
compat-libstdc++-296-2.96-132.7.2
compat-openldap-2.1.30-12.el4

echo "kernel.shmmax=536870912" >> /etc/sysctl.conf //在redhat上最大共享內存不建議超過4*1024*1024*1024-1=4294967295

這個更改在系統重新啟動后生效。若不設置該參數，在安裝Sybase數據庫時會出現錯誤

設備host文件：

[root@localhost share]# vi /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.0.12 daybreak.com hubin
~
~

將把CM軟件打包
root@localhost sce]# cat scms-cm-v355-b182-bundle-linux-tar.part1 scms-cm-v355-b182-bundle-linux-tar.part2 scms-cm-v355-b182-bundle-linux-tar.part3 scms-cm-v355-b182-bundle-linux-tar.part4 scms-cm-v355-b182-bundle-linux-tar.part5 > SCMS_CM_bundle_linux_v350.tar
[root@localhost sce]# ls
SCMS_CM_bundle_linux_v350.tar
scms-cm-v355-b182-bundle-linux-tar.part1
scms-cm-v355-b182-bundle-linux-tar.part2
scms-cm-v355-b182-bundle-linux-tar.part3
scms-cm-v355-b182-bundle-linux-tar.part4
scms-cm-v355-b182-bundle-linux-tar.part5
[root@localhost sce]# tar xvf SCMS_CM_bundle_linux_v350.tar 解壓CM軟件
NIFEST
CM_3.5.5_B182.tgz
HomeCM.tgz
extras/
extras/java/
extras/java/installjava.sh
extras/java/linux/
extras/java/linux/i686/
extras/java/linux/i686/jre1.5.0_14.sum
extras/java/linux/i686/jre1.5.0_14.tar.gz
extras/java/linux/x86_64/
sybase/config/09 devices.sql
sybase/config/10 tempdb.sql
sybase/config/11 apricot db.sql
sybase/config/12 apricot thresholds.sql
sybase/config/13 apricot abortran.sql
sybase/config/15 pqb_admin user.sql
sybase/config/16 restart
sybase/config/configsyb.sh
sybase/config/sybase-etc-init-script
sybase/installsyb.sh
sybase/Linux/
sybase/Linux/ANY_200604040202.lic
sybase/Linux/ase1502_linx86_32.sum
sybase/Linux/ase1502_linx86_32.tgz
sybase/Linux/check.sh
sybase/Linux/sqlsrv.res
sybase/Linux/sybsession.txt
sybase/syb_interfaces.sh
[root@localhost sce]# ls
CM_3.5.5_B182.tgz scms-cm-v355-b182-bundle-linux-tar.part1
doc scms-cm-v355-b182-bundle-linux-tar.part2
extras scms-cm-v355-b182-bundle-linux-tar.part3
HomeCM.tgz scms-cm-v355-b182-bundle-linux-tar.part4
install-scripts scms-cm-v355-b182-bundle-linux-tar.part5
MANIFEST sybase
SCMS_CM_bundle_linux_v350.tar
[root@localhost sce]# cd install-scripts/
[root@localhost install-scripts]# ls
Aggregation dbmig_21_250.sh install-cm.sh
check_prerequisites.sh dbmig_250_255.sh rpt-tmpl-scas-modifier.exe
check_syb.sh dbrename_25_300.sh set_shmmax.sh

運行install-scripts/check_prerequisites.sh 查系統是否符合sybase和cm的安裝條件

[root@localhost install-scripts]# ./check_prerequisites.sh
Check: Minimal CPU Speed: 800
[Success] CPU Speed is sufficient: 2509MHz

Check: Minimal OS Version: RHEL4/5
[Success] Found RHEL4, Checking minimal update level:
[Success] Update level: 8

Check: Additional RPMS
[Success] Required library glibc installed
[Failed] Installed version is "kernel-2.6.9-89.EL"
[Notice] If installed version is greater than expected, you may ignore this error
[Success] Required library compat-libstdc++-33 installed

Check: Total memory
[Success] Found 1099556 KB memory

Check: Max Shared memory
[Failed] Found 33554432 bytes shared memory, need at least 512000000 bytes
[Failed] Run set_shmmmax.sh script

Check: Python in execution path
[Success] Python found at /usr/bin/python

Check: 8096000K free on intended CM home dir:
[Warning] No CM home directory given. Cannot verify there is enough free space to install CM

Check: 1024000K free on intended Sybase home dir:
[Warning] No sybase home directory given. Cannot verify there is enough free space to install Sybase

Check: 15000000K free on intended Sybase Data dir:
[Warning] No sybase Data directory given.
[Notice] Only applicable if you intend on using Datadir installation method

Check: Locale set to en_US
[Success] System Locale set to en_US
[Success] Current Locale set to en_US

Check: Names for all NIC's
[Success] IP Address 192.168.0.12 is resolvable through /etc/hosts
[Success] IP Address 127.0.0.1 is resolvable through /etc/hosts

[root@localhost install-scripts]# echo "kernel.shmmax=536870912" >> /etc/sysctl.conf 設置共享內存
現在我們需要把設備reboot下了啦，這樣設置的一些參數，才可以生效的；

二、install sybase database

[root@daybreak ~]#
[root@daybreak ~]#
[root@daybreak ~]# cd /etc/sysc
sysconfig/ sysctl.conf
[root@daybreak ~]# cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.

# Controls IP packet forwarding
net.ipv4.ip_forward = 0

# Controls source route verification
net.ipv4.conf.default.rp_filter = 1

# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0

# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0

# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
kernel.shmmax=536870912
[root@daybreak ~]# cd /home/sce/install-scripts/
[root@daybreak install-scripts]# ./check_prerequisites.sh
Check: Minimal CPU Speed: 800
[Success] CPU Speed is sufficient: 2528MHz

Check: Minimal OS Version: RHEL4/5
[Success] Found RHEL4, Checking minimal update level:
[Success] Update level: 8

Check: Additional RPMS
[Success] Required library glibc installed
[Failed] Installed version is "kernel-2.6.9-89.EL"
[Notice] If installed version is greater than expected, you may ignore this error
[Success] Required library compat-libstdc++-33 installed

Check: Total memory
[Success] Found 1099556 KB memory

Check: Max Shared memory
[Success] Found 536870912 bytes of shared memory

Check: Python in execution path
[Success] Python found at /usr/bin/python

Check: 8096000K free on intended CM home dir:
[Warning] No CM home directory given. Cannot verify there is enough free space to install CM

Check: 1024000K free on intended Sybase home dir:
[Warning] No sybase home directory given. Cannot verify there is enough free space to install Sybase

Check: 15000000K free on intended Sybase Data dir:
[Warning] No sybase Data directory given.
[Notice] Only applicable if you intend on using Datadir installation method

Check: Locale set to en_US
[Success] System Locale set to en_US
[Success] Current Locale set to en_US

Check: Names for all NIC's
[Success] IP Address 192.168.0.12 is resolvable through /etc/hosts
[Success] IP Address 127.0.0.1 is resolvable through /etc/hosts

[root@daybreak sybase]# ./installsyb.sh
[root@daybreak sybase]# Starting Sybase install sequence
Must specify Sybase home

Usage:
installsyb.sh --sybhome=SYBHOME --datadir=DATADIR [ --y | --n ]

SYBHOME is the new home directory of the Sybase user (should have 1000000 Kbytes free).
Data location options:
1) specify DATADIR as a directory in which all Sybase data will be stored in files
This location should be in a partition where at least 15GB is free, and must be an empty directory.
2) use --y to automatically answer YES to all error questions during installation (Halt on No errors)
3) use --n to automatically answer NO to all error questions during installation (Halt on All errors)

[root@daybreak sybase]# ./installsyb.sh --sybhome=/opt/sybase --datadir=/opt/data/
Starting Sybase install sequence
testing dist file integrity...done
Running platform-specific check file...done
Adding sybase user...done
NOTE: if this installation aborts or fails, you may want
to remove the sybase process/user before attempting again. This
can be done with the command:
pkill -9 -xU sybase; userdel -r sybase
?

Extracting dist file to /usr/tmp/sybinstall7269...done
Running Sybase installer - this will take a while...done
Configuring Sybase ASE ...
Building Adaptive Server 'pqbsyb1':
Writing entry into directory services...
Directory services entry complete.
Building master device...
Master device complete.
Writing RUN_pqbsyb1 file...
RUN_pqbsyb1 file complete.
Starting server...
Server started.
Building sysprocs device and sybsystemprocs database...
sysprocs device and sybsystemprocs database created.
Running installmaster script to install system stored procedures...
installmaster: 90% complete.
installmaster: 100% complete.
installmaster script complete.
Creating two-phase commit database...
Two phase commit database complete.
Installing common character sets (Code Page 437, Code Page 850, ISO Latin-1,
Macintosh and HP Roman-8)...
Character sets installed.
Setting server name in Adaptive Server...
Server name added.
Server 'pqbsyb1' was successfully created.
done
Stopping Sybase for interfaces update...
Waiting for Sybase to go down...
Waiting for Sybase to come up... (0 of 60)
Please enter SIZE in 2K blocks of file to be used for the "data[maximum is 15243036; minimum
The inserted data file size 15 is bigger than the maximum 15243036
Please enter SIZE in 2K blocks of file to be used for the "data[maximum is 15243036; minimum is 5242798]" device.
NOTE - the actual size required will include a 1.05 overhead on the amount you specify.
SIZE in 2K blocks: 10000000?? 設置數據庫空間大小
Do you want to input the values again? (yes/no): no
Password correctly set.
(return status = 0)
Making symlinks in /etc/init.d and rcX.d ...

Beginning configuration of Sybase server, this can take up to THREE HOURS,
and produce lots of output.
IMPORTANT: Do not interrupt this process
/home/sce/sybase/config /home/sce/sybase/config
=== running sql script 03 net and memory.sql
00:00000:00015:2011/07/02 11:51:34.16 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.019'.
00:00000:00015:2011/07/02 11:51:34.16 server The configuration option 'max network packet size' has been changed by 'sa' from '2048' to '16384'.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
max network packet size 2048 0 16384
2048 bytes static

(1 row affected)
Configuration option changed. Since the option is static, Adaptive Server must
be rebooted in order for the change to take effect.
Changing the value of 'max network packet size' to '16384' reduces the amount of
memory ASE uses by 20 K. The reduced memory may be reused when this configure
value changes, but will not be released until ASE restarts.
(return status = 0)
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
tcp no delay 1 0 1
1 switch static

(1 row affected)
Resulting configuration value and memory use have not changed from previous
values: new configuration value 1, previous value 1.
(return status = 0)
00:00000:00015:2011/07/02 11:51:34.20 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.020'.
00:00000:00015:2011/07/02 11:51:34.20 server The configuration option 'allocate max shared memory' has been changed by 'sa' from '0' to '1'.
00:00000:00015:2011/07/02 11:51:34.21 kernel Allocating a shared memory segment of size 17833984 bytes.
00:00000:00015:2011/07/02 11:51:34.24 kernel Total shared memory allocated in this attempt. Number of segments(s): 1. Total size of allocation in bytes: 17833984
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
allocate max shared memory 0 0 1
1 switch dynamic

(1 row affected)
Configuration option changed. ASE need not be rebooted since the option is
dynamic.
Changing the value of 'allocate max shared memory' does not increase the amount
of memory Adaptive Server uses.
(return status = 0)
00:00000:00015:2011/07/02 11:51:34.27 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.021'.
00:00000:00015:2011/07/02 11:51:34.27 server The configuration option 'max memory' has been changed by 'sa' from '49152' to '250000'.
00:00000:00015:2011/07/02 11:51:34.27 kernel Allocating a shared memory segment of size 411336704 bytes.
00:00000:00015:2011/07/02 11:51:34.27 kernel Total shared memory allocated in this attempt. Number of segments(s): 1. Total size of allocation in bytes: 411336704
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
max memory 49152 500000 250000
250000 memory pages(2k) dynamic

(1 row affected)
Configuration option changed. ASE need not be rebooted since the option is
dynamic.
Changing the value of 'max memory' does not increase the amount of memory
Adaptive Server uses.
(return status = 0)
00:00000:00015:2011/07/02 11:51:34.39 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to? 'procedure cache size' has been changed by 'sa' from '7000' to '12800'.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
procedure cache size 7000 27104 12800
12800 memory pages(2k) dynamic

(1 row affected)
Configuration option changed. ASE need not be rebooted since the option is
dynamic.
Changing the value of 'procedure cache size' to '12800' increases the amount of
memory ASE uses by 313924 K.
(return status = 0)
00:00000:00015:2011/07/02 11:51:35.43 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.025'.
00:00000:00015:2011/07/02 11:51:35.43 server The configuration option 'additional network memory' has been changed by 'sa' from '0' to '122880'.
Msg 5853, Level 16, State 1:
Server 'pqbsyb1', Procedure 'sp_configure', Line 860:
'additional network memory' has been modified from '123000' to '122880' by the
verification routine.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
additional network memory 0 120 122880
122880 bytes dynamic

(1 Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
lock shared memory 0 0 1
0 switch static

(1 row affected)
Configuration option changed. Since the option is static, Adaptive Server must
be rebooted in order for the change to take effect.
Changing the value of 'lock shared memory' does not increase the amount of
memory Adaptive Server uses.
(return status = 0)
00:00000:00015:2011/07/02 11:51:35.47 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.027'.
00:00000:00015:2011/07/02 11:51:35.47 server The configuration option 'enable housekeeper GC' has been changed by 'sa' from '1' to '4'.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
enable housekeeper GC 1 0 4
4 switch dynamic

(1 row affected)
------------ -------------------- ----------
number of locks 10000 7874 50000
50000 number dynamic

(1 row affected)
Configuration option changed. ASE need not be rebooted since the option is
dynamic.
Changing the value of 'number of locks' to '50000' increases the amount of
memory ASE uses by 6244 K.
(return status = 0)
00:00000:00015:2011/07/02 11:51:35.52 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.029'.
00:00000:00015:2011/07/02 11:51:35.53 server The configuration option 'heap memory per user' has been changed by 'sa' from '4096' to '16384'.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
heap memory per user 4096 0 16384
16384 bytes dynamic

(1 row affected)
Configuration option changed. ASE need not be rebooted since the option is
dynamic.
Changing the value of 'heap memory per user' to '16384' increases the amount of
memory ASE uses by 330 K.
(return status = 0)
00:00000:00015:2011/07/02 11:51:35.55 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.030'.
00:00000:00015:2011/07/02 11:51:35.55 server The configuration option 'user log cache size' has been changed by 'sa' from '16384' to '32768'.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
user log cache size 16384 0 32768
16384 bytes static

(1 row affected)
Configuration option changed. Since the option is static, Adaptive Server must
be rebooted in order for the change to take effect.
Changing the value of 'user log cache size' to '32768' increases the amount of
memory ASE uses by 1184 K.
(return status = 0)
00:00000:00015:2011/07/02 11:51:35.57 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.031'.
00:00000:00015:2011/07/02 11:51:35.57 server The configuration option 'number of user connections' has been changed by 'sa' from '25' to '200'.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
number of user connections 25 41886 200
200 number dynamic

(1 row affected)
Configuration option changed. ASE need not be rebooted since the option is
dynamic.
Changing the value of 'number of user connections' to '200' increases the amount
of memory ASE uses by 45194 K.
(return status = 0)
00:00000:00015:2011/07/02 11:51:35.60 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.032'.
00:00000:00015:2011/07/02 11:51:35.60 server The configuration option 'number of open objects' has been changed by 'sa' from '500' to '1000'.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
number of open objects 500 1658 1000
1000 number dynamic

(1 row affected)
Configuration option changed. ASE need not be rebooted since the option is
dynamic.
Changing the value of 'number of open objects' to '1000' increases the amount of
memory ASE uses by 2498 K.
(return status = 0)
00:00000:00015:2011/07/02 11:51:35.62 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.033'.
00:00000:00015:2011/07/02 11:51:35.63 server The configuration option 'number of open indexes' has been changed by 'sa' from '500' to '1000'.
apricot_log1
=== running sql script 09 C devices.sql
00:00000:00015:2011/07/02 11:53:30.96 kernel Initializing virtual device 5, '/opt/data//tempdb.dat' with dsync 'off'.
00:00000:00015:2011/07/02 11:53:30.96 kernel Virtual device 5 started using asynchronous i/o.
00:00000:00015:2011/07/02 11:53:30.97 kernel Initializing device /opt/data//tempdb.dat from offset 0 with zeros.
00:00000:00015:2011/07/02 11:53:37.29 kernel Finished initialization.
tempdb_dev
=== running sql script 09 devices.sql
going to activate data, log and temp disks
=== running sql script 10 tempdb.sql
tempdb
Extending database by 65536 pages (1024.0 megabytes) on disk tempdb_dev
Processed 26 allocation unit(s) out of 256 units (allocation page 7936). 10%
completed.
Processed 205 allocation unit(s) out of 256 units (allocation page 53760). 80%
completed.
Processed 231 allocation unit(s) out of 256 units (allocation page 60416). 90%
completed.
Processed 256 allocation unit(s) out of 256 units (allocation page 66816). 100%
completed.
Warning: Attempting to change database options for a temporary database.
Database options must be kept consistent across all temporary databases.
Database option 'select into/bulkcopy/pllsort' turned ON for database 'tempdb'.
Running CHECKPOINT on database 'tempdb' for option 'select
into/bulkcopy/pllsort' to take effect.
(return status = 0)
DBCC execution completed. If DBCC printed error messages, contact a user with
System Administrator (SA) role.
Segment reference to device dropped.
(return status = 0)
DBCC execution completed. If DBCC printed error messages, contact a user with
System Administrator (SA) role.
DBCC execution completed. If DBCC printed error messages, contact a user with
System Administrator (SA) role.
The last-chance threshold for database tempdb is now 16 pages.
Segment reference to device dropped.
(return status = 0)
DBCC execution completed. If DBCC printed error messages, contact a user with
System Administrator (SA) role.
Segment reference to device dropped.
WARNING: There are no longer any segments referencing device 'master'. This
device will no longer be used for space allocation.
(return status = 0)
00:00000:00017:2011/07/02 11:53:39.18 server Configuration file '/opt/sybase/ASE-15_0/pqbsyb1.cfg' has been written and the previous version has been renamed to '/opt/sybase/ASE-15_0/pqbsyb1.034'.
00:00000:00017:2011/07/02 11:53:39.78 server The configuration option 'number of devices' has been changed by 'sa' from '10' to '30'.
Parameter Name Default Memory Used Config Value
Run Value Unit Type
------------------------------ ----------- ----------- ------------
------------ -------------------- ----------
number of devices 10 #34 30
30 number dynamic

(1 row affected)
Configuration option changed. ASE need not be rebooted since the option is
dynamic.
Changing the value of 'number of devices' to '30' reduces the amount of memory
ASE uses by 6 K. The reduced memory may be reused when this configure value
changes, but will not be released until ASE restarts.
(return status = 0)
=== running sql script 11 apricot db.sql

configuring data area
NOTE: THIS SCRIPT MAY RUN A LONG TIME (UP TO THREE HOURS)
WITHOUT PRODUCING OUTPUT. IT IS NOT STUCK - DO NOT INTERRUPT IT
CREATE DATABASE: allocating 1249792 logical pages (19528.0 megabytes) on disk
'apricot_data1'.
CREATE DATABASE: allocating 186112 logical pages (2908.0 megabytes) on disk
'apricot_log1'.
Processed 561 allocation unit(s) out of 5609 units (allocation page 1313280).
10% completed.
Processed 1122 allocation unit(s) out of 5609 units (allocation page 158464).
00:00000:00001:2011/07/02 11:57:07.35 server on top of default character set:
00:00000:00001:2011/07/02 11:57:07.35 server 'iso_1' (ID = 1).
00:00000:00001:2011/07/02 11:57:07.35 server Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
Waiting for Sybase to come up... (2 of 30)
Skipping file configsyb.sh
Skipping file sybase-etc-init-script
/home/sce/sybase/config
Done Sybase configuration sequence
done
cleaning up...done.

三、install CM

[root@daybreak sybase]# pwd
/home/sce/sybase
[root@daybreak sybase]# cd ..
[root@daybreak sce]# cd install-scripts/
[root@daybreak install-scripts]# ls
Aggregation dbmig_21_250.sh install-cm.sh
check_prerequisites.sh dbmig_250_255.sh rpt-tmpl-scas-modifier.exe
check_syb.sh dbrename_25_300.sh set_shmmax.sh
[root@daybreak install-scripts]# ./check_syb.sh 檢查數據庫的安裝
Sybase is properly installed and configured
[root@daybreak install-scripts]# cd ..
[root@daybreak sce]# cd install-scripts/

cm文件夾不需要創建，否則出錯：

[root@daybreak install-scripts]# ./install-cm.sh -d /opt/cm
verify_dir: /opt/cm already exists
Error - ./install-cm.sh - directory /opt/cm problem - exiting
[root@daybreak install-scripts]# rm /opt/cm
rm: cannot remove directory `/opt/cm': Is a directory
[root@daybreak install-scripts]# rmdir /opt/cm

安裝cm
[root@daybreak install-scripts]# ./install-cm.sh -d /opt/cm
Adding/verifying user and group for SCMS-CM ...
Populating scmscm home /opt/cm ...
Populating scmscm home /opt/cm from ../HomeCM.tgz ...
Opening CM distribution ../CM*.tgz ...
...done
fixing sybase init.d script ...
...error
./install-cm.sh - problem fixing sybase symlinks - continuing 5
Installing java...
Checking CRC of linux/i686/jre1.5.0_14.tar.gz ......done
Extracting patch file...
jre1.5.0_14/bin/
jre1.5.0_14/bin/java
jre1.5.0_14/bin/ControlPanel
jre1.5.0_14/bin/java_vm
jre1.5.0_14/bin/javaws
jre1.5.0_14/lib/zi/Atlantic/
jre1.5.0_14/lib/zi/Atlantic/St_Helena
jre1.5.0_14/lib/zi/Atlantic/Cape_Verde
jre1.5.0_14/lib/zi/Atlantic/Madeira
jre1.5.0_14/lib/zi/Atlantic/Reykjavik
jre1.5.0_14/lib/zi/Atlantic/Faroe
jre1.5.0_14/lib/zi/Atlantic/Azores
jre1.5.0_14/lib/zi/Atlantic/Canary
jre1.5.0_14/lib/zi/Atlantic/Bermuda
jre1.5.0_14/lib/zi/Atlantic/Stanley
jre1.5.0_14/lib/zi/Atlantic/South_Georgia
jre1.5.0_14/lib/zi/Australia/
jre1.5.0_14/lib/zi/Australia/Melbourne
jre1.5.0_14/lib/zi/Australia/Adelaide
jre1.5.0_14/lib/zi/Australia/Perth
jre1.5.0_14/lib/zi/Australia/Lord_Howe
jre1.5.0_14/lib/zi/Australia/Hobart
jre1.5.0_14/lib/zi/Australia/Currie
jre1.5.0_14/README
jre1.5.0_14/THIRDPARTYLICENSEREADME.txt
jre1.5.0_14/Welcome.html
....done
Creating sym link ...
....done
done
...done
Making symlinks in /etc/init.d and rc*.d ...
done

Done installation. 安裝完成

NOTE: The user name created for SCMS-CM is scmscm. You may want to set a password for this account now.

[root@daybreak install-scripts]# passwd scmscm 設置scmscm密碼
Changing password for user scmscm.
New UNIX password:
BAD PASSWORD: it does not contain enough DIFFERENT characters
Retype new UNIX password:
Sorry, passwords do not match
New UNIX password:
Retype new UNIX password:
passwd: all authentication tokens updated successfully. 設置成功

?

[root@daybreak install-scripts]# su scmscm
[scmscm@daybreak install-scripts]$ cd /opt/cm/cm/bin/
[scmscm@daybreak bin]$ pwd
/opt/cm/cm/bin

設置時間

[scmscm@daybreak bin]$ ./jselect-sce-tz.sh --offset=480
TIME_STAMP| OFFSET_MIN|
------------------------+------------------------+
2011-07-02 12:06:01.133| 480|

[scmscm@daybreak bin]$ ./jselect-sce-tz.sh --status 檢查設置時間
TIME_STAMP| OFFSET_MIN|
------------------------+------------------------+
2011-07-02 12:06:01.133| 480|

[scmscm@daybreak bin]$ date
Sat Jul 2 12:06:22 EDT 2011
[scmscm@daybreak bin]$ clock -w
Sorry, only the superuser can change the Hardware Clock.
[scmscm@daybreak bin]$ su
Password:
[root@daybreak bin]# clock -w 保存時間設置

[root@daybreak bin]# date
Sat Jul 2 12:06:55 EDT 2011
[root@daybreak bin]# su scmscm
[scmscm@daybreak bin]$
[scmscm@daybreak bin]$
[scmscm@daybreak bin]$ ls
clumain.sh cm cm.jar jselect-sce-tz.sh p3rpc p3stats update_vlinks.sh
[scmscm@daybreak bin]$ ./p3
p3rpc p3stats
[scmscm@daybreak bin]$ ./p3
p3rpc p3stats
[scmscm@daybreak bin]$ ./p3rpc --set-user --username=scmscm --password=scmscm123 設置用戶名和密碼

[scmscm@daybreak ~]$ cd setup/
[scmscm@daybreak setup]$ ls
alive.sh mbean.py on-boot.py scmscm sybase
common.sh monitor RUN_0_cm STOP_1_cm syb_interfaces.sh
[scmscm@daybreak setup]$ ./alive.sh 檢查cm運行狀態
STATUS OK
[scmscm@daybreak setup]$ ls
alive.sh mbean.py on-boot.py scmscm sybase
common.sh monitor RUN_0_cm STOP_1_cm syb_interfaces.sh
[scmscm@daybreak setup]$ cd ..
[scmscm@daybreak ~]$ ls
cm db_maint doc python scmscm.csh scmscm.sh scripts setup unsupported
[scmscm@daybreak ~]$ cd scripts/
[scmscm@daybreak scripts]$ ls
adapterconf.py dbconf.sh dbtables.sh rdr-rate.py sybrestore.sh
common.sh dbfree.sh droptable.sh sceconf.sh
csvconf.sh dbperiodic.py prunetable.sh sybback.sh
[scmscm@daybreak scripts]$ ./dbfree.sh 查看數據庫使用情況
Name % Data Free % Log Free
---------------------- ----------- ----------
Database 99 99
[scmscm@daybreak scripts]$ ./dbtables.sh
Executing query ...
name| num_lines| min_time| max_time|
------------------------+------------------------+------------------------+------------------------+
RPT_SUR| 0| null| null|
RPT_LUR| 0| null| null|
RPT_VLUR| 0| null| null|
RPT_PUR| 0| null| null|
RPT_TR| 0| null| null|
RPT_MALUR| 0| null| null|
RPT_MEDIA| 0| null| null|
RPT_GUR| 0| null| null|
RPT_TOPS_PERIOD0| 0| null| null|
RPT_TOPS_PERIOD1| 0| null| null|
_TOPS_PERIOD0_CUMULATIVE| 0| null| null|
_TOPS_PERIOD1_CUMULATIVE| 0| null| null|

[scmscm@daybreak scripts]$ date
Sat Jul 2 12:14:44 EDT 2011
[scmscm@daybreak scripts]$ ./sceconf.sh --op=list 檢查sce鏈接

IP Rate Peak
------------ ----------- -----------

Command terminated successfully
[scmscm@daybreak scripts]$ su
Password:
[root@daybreak scripts]#
[root@daybreak scripts]#
[root@daybreak scripts]#
[root@daybreak scripts]# netstat -an |grep 4100 檢查數據庫連接情況
tcp 0 0 127.0.0.1:4100 0.0.0.0:* LISTEN
tcp 0 0 192.168.0.12:4100 0.0.0.0:* LISTEN 連接成功
tcp 0 0 127.0.0.1:4100 127.0.0.1:32850 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32854 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32855 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32850 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32851 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32863 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32856 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32857 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32864 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32865 ::ffff:127.0.0.1:4100 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:32866 ::ffff:127.0.0.1:4100 ESTABLISHED
[root@daybreak scripts]# netstat -an |grep 33000 檢查cm連接情況
tcp 0 0 :::33000 :::* LISTEN
[root@daybreak scripts]# su sybase
[sybase@daybreak scripts]$ cd /opt/sybase/
ASE-15_0/ DataAccess/ OCS-15_0/
ASE150.csh DBISQL/ RPL-15_0/
ASE150.env .gtkrc .scUserPreferences43
ASE150.sh interfaces shared/
ASEP/ interf.old SYBASE.csh
.bash_logout .java/ SYBASE.env
.bash_profile jConnect-6_0/ SYBASE.sh
.bashrc jutils-2_0/ SYSAM-2_0/
charsets/ _jvm/ UAF-2_0/
collate/ .kde/ uninstall/
config/ locales/ vpd.properties
data/ log.txt
[sybase@daybreak scripts]$ cd /opt/sybase/OCS-15_0/
[sybase@daybreak OCS-15_0]$ ls
bin devlib lib sample sybhelp
config include lib3p scripts xappdefaults
[sybase@daybreak OCS-15_0]$ cd bin/
[sybase@daybreak bin]$ pwd
/opt/sybase/OCS-15_0/bin
[sybase@daybreak bin]$ ls
bcp certpk12 cobpre_r dscp installjava pwdcrypt
bcp_r certreq defncopy dsedit isql sybhelp
certauth cobpre defncopy_r extractjava isql_r

進入syabase數據庫，檢查table是否完整

[sybase@daybreak bin]$ ./isql -S pqbsyb1 -Upqb_admin -Ppqb_admin
1> sp_help
2> go
Name Owner
Object_type
------------------------------------------------------ ----------
--------------------------------
sysquerymetrics dbo
(1 row affected)
User_type Storage_type Length Nulls
Default_name Rule_name
Access_Rule_name
------------------ ------------------------ ------------ ----------
------------------------ ------------------
--------------------------------

Class_name Jar_name
-------------------- ----------------

Jar_name
--------------------

(return status = 0)
1>
[1]+ Stopped ./isql -S pqbsyb1 -Upqb_admin -Ppqb_admin
[sybase@daybreak bin]$
?

由于這個是我在客戶那里安裝好了，回來在VMware上安裝的，所以有在查看表格和sce設備是都是空的

?

此次編寫是為了，廣大好學網絡技術人員學習和技術討論，本人在網上安裝是就沒有找到相關文章，所以我安裝完成后進行整理；望此文檔對好網絡技術人員有所幫助！
?

轉載于:https://blog.51cto.com/hyperbin/602131

總結

以上是生活随笔為你收集整理的不吃不喝，两周业余时间研究（cisco SCE CM ）的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。