USB 设备类代码表
USB Class Codes
官方地址：http://www.usb.org/developers/defined_class
USB defines class code information that is used to identify a device’s functionality and to nominally load a device driver based on that functionality. The information is contained in three bytes with the names Base Class, SubClass, and Protocol. (Note that ‘Base Class’ is used in this description to identify the first byte of the Class Code triple. That terminology is not used in the USB Specification). There are two places on a device where class code information can be placed.One place is in the Device Descriptor, and the other is in Interface Descriptors. Some defined class codes are allowed to be used only in a Device Descriptor, others can be used in both Device and Interface Descriptors, and some can only be used in Interface Descriptors. The table below shows the currently defined set of Base Class values, what the generic usage is, and where that Base Class can be used (either Device or Interface Descriptors or both).
| Base Class | Descriptor Usage | Description |
| 00h | Device | Use class information in the Interface Descriptors |
| 01h | Interface | Audio?? |
| 02h | Both | Communications and CDC Control |
| 03h | Interface | HID (Human Interface Device) |
| 05h | Interface | Physical |
| 06h | Interface | Image |
| 07h | Interface | Printer |
| 08h | Interface | Mass Storage |
| 09h | Device | Hub |
| 0Ah | Interface | CDC-Data |
| 0Bh | Interface | Smart Card |
| 0Dh | Interface | Content Security |
| 0Eh | Interface | Video |
| 0Fh | Interface | Personal Healthcare |
| 10h | Interface | Audio/Video Devices |
| 11h | Device | Billboard Device Class |
| 12h | Interface | USB Type-C Bridge Class |
| DCh | Both | Diagnostic Device |
| E0h | Interface | Wireless Controller |
| EFh | Both | Miscellaneous |
| FEh | Interface | Application Specific |
| FFh | Both | Vendor Specific |
總結
以上是生活随笔為你收集整理的USB 设备类代码表的全部內容，希望文章能夠幫你解決所遇到的問題。
- 上一篇： 彻底理解数据库事物
- 下一篇： java之Synchronize