1) 如何yank字符然后再查找 ( / Ctrl - R 0 ) The most recently yanked text will be stored in the 0 and registers (if no register was explicitly specified e.g. by xy ). Then you can paste the text of any that register in the last line (eith

1) 如何yank字符然后再查找 (/Ctrl-R0)

The most recently yanked text will be stored in the 0 and " registers

(if no register was explicitly specified e.g. by "xy).

Then you can paste the text of any that register in the last line (either in search mode / or in last line command mode : ) with Ctrl-RX, where X is

the register you want to paste.

For example:

/Ctrl-R0

Will paste the contents of the register 0 in

the forward search command pattern.

2) 如何使用不同的寄存器(注意寄存器的調用是以 ［“］ 開始的)

首先是 :reg 可以查看當前所有的寄存器的狀態

把內容放到某一個寄存器 “1 yy

調出寄存器里的內容 “1 p

本文原創發布php中文網，轉載請注明出處，感謝您的尊重！

總結

以上是生活随笔為你收集整理的mysql gui vim_vim(一)： 小技巧的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。