用计算机控制检测实时温度,温度实时测量及控制系统.doc
溫度實時測量及控制系統
摘要
文中的設計電路以AT89C52單片機作為控制器。主要由鍵盤輸入電路、溫度測量電路、輸出顯示電路和電動機控制電路四部分。吸收了硬件軟件化的思想,大部分功能通過軟件來實現,使電路簡單明了,系統穩定性大大提高。該系統利用AT89C52單片機分別采集各個溫度點的溫度,實現溫度顯示、控制以及時間的顯示等功能。它以AT89C52單片機為主控制芯片,采用數字溫度傳感器DS18B20實現溫度的檢測,測量精度可以達到0.5℃。該系統采用了1602顯示模塊,形象直觀的顯示測出的溫度值。基于AT89C52單片機的單總線溫度測控系統具有硬件組成簡單、讀數方便、精度高、測溫范圍廣等特點,在實際工程中得到廣泛應用。
關鍵詞:數字溫度傳感器;AT89C52單片機;溫度測量;溫度控制;時間顯示
Abstract
This design of the circuit in order to the AT89C52 single-chip microcomputer as the controller. It includes Keyboard input circuit, temperature measurementcircuit, output display circuit,motor control. Many functions are finished by the software. So it simples the circuit and enhances the stability of the system Adopting the AT89C52 single-chip microcomputer in the system to collected temperature from various temperature positions realizes the temperature display and control function. Applying AT89C52 single-chip microcomputer-based as main control chip, it realizes the multi-temperature testing by using of digital temperature sensor DS18B20, and measurement accuracy reaches to 0.5 ℃. At the time the system uses a 1602 display module to show the measured temperature values. Based on AT89C52 single-chip single-bus multi-point temperature measurement and control system’s hardware assemble simply, reading data conveniently, high accuracy and widely temperature measuring, in the actual projects it is widely applied.
Keywords:digital temperature sensor; AT89C52 microcontroller; temperature measure;temperature control;time display
目 錄
1 緒論1
1.1 課題研究的背景1
1.2 課題研究的目的和意義1
2 硬件電路設計2
2.1 總體設計2
2.2 單元電路設計2
2.2.1 單片機最小系統設計2
2.2.2 顯示電路4
2.2.3 溫度傳感器檢測電路6
2.2.4 鍵盤電路8
3 軟件設計10
3.1功能說明10
3.2 主程序流程10
4 Protel繪圖11
4.1 Protel軟件簡介11
4.2 原理圖繪制11
5 電路仿真16
5.1 繪制仿真電路圖16
5.2 程序調試18
5.3 仿真結果21
6 硬件電路制作與調試23
6.1 電路焊接23
6.2 電路調試23
6.3 調試結果26
結論27
致 謝28
參考文獻29
1 緒論
1.1 課題研究的背景
溫度控制廣泛應用于人們的生產和生活中,人們使用溫度計來采集溫度,通過人工操作加熱、通風和降溫設備來控制溫度,這樣不但實時性差,而且操作人員的勞動強度大。即使有些用戶采用半導體二極管作溫度傳感器,但由于其互換性差,效果也不理想。對工業生產可靠進行造成影響,甚至操作人員的安全。為了避免這
總結
以上是生活随笔為你收集整理的用计算机控制检测实时温度,温度实时测量及控制系统.doc的全部?jī)?nèi)容,希望文章能夠幫你解決所遇到的問題。
- 上一篇: 陕西师范大学计算机专业录取,陕西师范大学
- 下一篇: 国家计算机科学进展,高等学校计算机一级学